[Sun Sep 25 02:53:21 2011] Detection parameters:
  Position = (354.2, 395.7) = 13 35 35.25 -34 12 27.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.6 +/- 15.8
  Background counts = 105.3
  Rate = 0.002 +/- 0.0003

[Sun Sep 25 02:53:22 2011] Off-axis axis estimate = 8.13'
[Sun Sep 25 03:35:55 2011] Using EEF radius (= 10.49 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:35:55 2011] Initial guess for spatial extent in simple fitting = 10.49"
[Sun Sep 25 03:35:55 2011] source mask rpix=2.4, npix_max = 33, mask sum = 21, frac = 0.619
[Sun Sep 25 03:35:55 2011] Giving source the simple spatial ID 12 for pass 0, mean size = 10.49"
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12.csv
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12.csv
[Sun Sep 25 04:16:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 04:16:33 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun Sep 25 04:16:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Sep 25 04:16:33 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun Sep 25 04:16:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sun Sep 25 04:16:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 05:23:26 2011] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 13.965747 pixels away
[Sun Sep 25 05:23:26 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:26 2011] Assessing source extent using major
[Sun Sep 25 05:23:26 2011] Source does appear to be extended
[Sun Sep 25 05:23:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 05:23:26 2011] Deleting source due to low Poisson probability 0.9