[Sun Sep 25 02:53:21 2011] Detection parameters:
  Position = (301.5, 322.1) = 13 35 53.72 -34 17 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 582880.6 +/- 932.2
  Background counts = 139.1
  Rate = 7 +/- 0.01

[Sun Sep 25 02:53:22 2011] Off-axis axis estimate = 1.73'
[Sun Sep 25 03:35:55 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:35:55 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Sep 25 03:35:55 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.056
[Sun Sep 25 03:35:55 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 04:16:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 04:16:32 2011] Fit fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 05:23:26 2011] Spatial fit model total counts = 423383.000000, observed total counts = 452107.000000
[Sun Sep 25 05:23:26 2011] Offset between fit and detection position for source 2 = 0.185705 pixels
[Sun Sep 25 05:23:26 2011] 423195.000000 total counts/ 25600.000000 bgd. counts: snr = 2484.968750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.185705 pixels
  Position = (301.3, 322.1) = 13 35 53.79 -34 17 45.5
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 397595.0 +/- 650.5
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Sun Sep 25 05:23:26 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:26 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 05:23:26 2011] Source does appear to be extended
[Sun Sep 25 05:23:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:12:53 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 06:12:53 2011] Initial guess for spatial extent in simple fitting = 6.69"
[Sun Sep 25 06:12:53 2011] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.962
[Sun Sep 25 06:12:53 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.69"
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep 25 06:30:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep 25 06:30:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1.csv
[Sun Sep 25 06:30:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep 25 06:30:56 2011] Fit fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep 25 07:25:29 2011] Spatial fit model total counts = 423253.000000, observed total counts = 452107.000000
[Sun Sep 25 07:25:29 2011] Offset between fit and detection position for source 2 = 0.000088 pixels
[Sun Sep 25 07:25:29 2011] 423066.000000 total counts/ 25600.000000 bgd. counts: snr = 2484.162500
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.000088 pixels
  Position = (301.3, 322.1) = 13 35 53.79 -34 17 45.5
  Extent = 6.7 (6.7-6.7)", rotation angle = 0
  Source counts = 397466.0 +/- 650.4
  Background counts = 25600.0
  Rate = 6 +/- 0.009
[Sun Sep 25 07:25:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 07:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 07:25:29 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 07:25:29 2011] Source does appear to be extended
[Sun Sep 25 07:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:25:44 2011] Counts = 397466.000000, rescaling region sizes by 3.000000
[Sun Sep 25 10:25:44 2011] XMMSAS src. selection expression = ellipse(26166.914800, 27975.918000, 1204.882235, 1204.882235, 0.000000, X, Y)
[Sun Sep 25 10:25:44 2011] Writing source region out to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_src.reg
[Sun Sep 25 10:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0029740101_pi300-10000_cl_sm2.00.img.gz, (232, 253) - (371, 391)
[Sun Sep 25 10:25:44 2011] XMMSAS bgd. selection expression = annulus(26166.914800, 27975.918000, 6024.411173, 12048.822347, X, Y) && !ellipse(17972.056540, 17302.133000, 513.256815, 513.256815, 0.000000, X, Y) && !ellipse(34866.991119, 23119.535217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17545.074203, 32507.023193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28736.745240, 20908.311600, 554.364016, 554.364016, 0.000000, X, Y) && !ellipse(35961.654388, 25719.090332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36354.463318, 24400.791290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35213.956000, 37660.614200, 2012.432058, 2012.432058, 0.000000, X, Y) && !ellipse(13643.446259, 30049.857300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15272.030609, 37977.073853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35618.958000, 37485.929800, 1516.088044, 386.098411, 200.875000, X, Y)
[Sun Sep 25 10:25:44 2011] Writing fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2.gif
[Sun Sep 25 10:26:16 2011] Mean detx,y = (329.87, -232.39) 
[Sun Sep 25 10:26:20 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 10:30:32 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 10:30:32 2011] Setting source spectrum file to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 10:30:32 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Sep 25 11:57:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:57:38 2011] Error reading totcts from fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Sep 25 11:57:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:57:38 2011] Using photon index=1.80, rate=5.58, arf fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 11:57:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:57:38 2011] Updating source flux to 5.1e-11
[Sun Sep 25 11:58:22 2011] Reading fit data from xmm0029740101/analysis//spectral/fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_pl.csv
[Sun Sep 25 11:58:22 2011] Spectral fit parameter nH value = 37661900000.0
[Sun Sep 25 11:58:22 2011] Spectral fit parameter PhoIndex value = 1.76323
[Sun Sep 25 11:58:22 2011] Failed to get F(0.3-8.0) from xmm0029740101/analysis//spectral/fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sun Sep 25 11:58:22 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:58:22 2011] Using Nh = 3.8e+10, photon index=1.76, rate=5.58, arf fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src2.arf
[Sun Sep 25 11:58:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:58:22 2011] Updating source flux to 5.2e-11