[Sun Sep 25 02:53:21 2011] Detection parameters:
  Position = (413.9, 296.2) = 13 35 14.25 -34 19 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.1 +/- 19.1
  Background counts = 93.8
  Rate = 0.003 +/- 0.0004

[Sun Sep 25 02:53:22 2011] Off-axis axis estimate = 8.37'
[Sun Sep 25 03:35:55 2011] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 03:35:55 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Sep 25 03:35:55 2011] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.896
[Sun Sep 25 03:35:55 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.62"
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6.csv
[Sun Sep 25 04:16:32 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6_1.ximg exists
[Sun Sep 25 04:16:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6.csv
[Sun Sep 25 04:16:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 04:16:33 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Sun Sep 25 04:16:33 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Sun Sep 25 04:16:33 2011] Fit fullrun_mos1_xmm0029740101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Sun Sep 25 05:23:26 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 12.315328 pixels away
[Sun Sep 25 05:23:26 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 05:23:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 05:23:26 2011] Assessing source extent using major
[Sun Sep 25 05:23:26 2011] Source does appear to be extended
[Sun Sep 25 05:23:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 06:12:53 2011] Using EEF radius (= 10.62 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 06:12:53 2011] Initial guess for spatial extent in simple fitting = 10.62"
[Sun Sep 25 06:12:53 2011] source mask rpix=2.4, npix_max = 34, mask sum = 31, frac = 0.896
[Sun Sep 25 06:12:53 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.62"
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6.ximg exists
[Sun Sep 25 06:30:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6.csv
[Sun Sep 25 06:30:56 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6_1.ximg exists
[Sun Sep 25 06:30:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6.csv
[Sun Sep 25 06:30:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 06:30:57 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sun Sep 25 06:30:57 2011] fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sun Sep 25 06:30:57 2011] Fit fullrun_mos1_xmm0029740101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sun Sep 25 07:25:29 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 13.170359 pixels away
[Sun Sep 25 07:25:29 2011] Source 13 is offset by 2.301269 and 4.226372 pixels which is larger than
2 X fitted extent = 1.244101 x 1.244101, not incorporating fit results
[Sun Sep 25 07:25:29 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 07:25:29 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 07:25:29 2011] Assessing source extent using major
[Sun Sep 25 07:25:29 2011] Source does appear to be extended
[Sun Sep 25 07:25:29 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 10:25:44 2011] XMMSAS src. selection expression = ellipse(35961.654388, 25719.090332, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Sep 25 10:25:44 2011] Writing source region out to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13_src.reg
[Sun Sep 25 10:25:44 2011] Extracting stamp from image fullrun_mos1_xmm0029740101_pi300-10000_cl_sm2.00.img.gz, (376, 259) - (451, 334)
[Sun Sep 25 10:25:44 2011] XMMSAS bgd. selection expression = annulus(35961.654388, 25719.090332, 1087.500000, 2175.000000, X, Y) && !ellipse(34866.991119, 23119.535217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36354.463318, 24400.791290, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep 25 10:25:44 2011] Writing fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13.gif
[Sun Sep 25 10:32:24 2011] Mean detx,y = (-5929.01, 7572.87) 
[Sun Sep 25 10:32:25 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Sep 25 10:32:43 2011] Binned source spectrum to 10 counts/bin
[Sun Sep 25 10:32:43 2011] Setting source spectrum file to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Sep 25 10:32:43 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Sep 25 11:24:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Sep 25 11:24:16 2011] rmf not generated due to insufficient counts
[Sun Sep 25 11:57:38 2011] Updating aperture counts using extracted products
[Sun Sep 25 11:57:38 2011] Error reading totcts from fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Sep 25 11:57:38 2011] Calculating source flux in energy range 0.30-8.00
[Sun Sep 25 11:57:38 2011] Using photon index=1.80, rate=0.00332, arf fullrun_mos1_xmm0029740101_pi300-10000_pass1_cl_src13.arf
[Sun Sep 25 11:57:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Sep 25 11:57:38 2011] Updating source flux to 5.1e-14
[Sun Sep 25 11:57:40 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting