[Tue Aug 14 12:08:05 2012] Detection parameters:
  Position = (285.2, 278.1) = 6 41 19.63 82 16 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138601.9 +/- 439.3
  Background counts = 247.1
  Rate = 3 +/- 0.009

[Tue Aug 14 12:08:05 2012] Off-axis axis estimate = 1.76'
[Tue Aug 14 12:14:18 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 12:14:18 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Aug 14 12:14:18 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Tue Aug 14 12:14:18 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Tue Aug 14 12:49:48 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 12:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 12:49:48 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 12:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 12:49:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 12:49:51 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 12:49:51 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 12:49:51 2012] Fit fullrun_pn_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 15:13:01 2012] Spatial fit model total counts = 104015.000000, observed total counts = 102986.000000
[Tue Aug 14 15:13:01 2012] Offset between fit and detection position for source 1 = 0.102066 pixels
[Tue Aug 14 15:13:01 2012] 103979.200000 total counts/ 20416.300000 bgd. counts: snr = 584.823727
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.102066 pixels
  Position = (285.2, 278.2) = 6 41 19.68 82 16 1.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 83562.9 +/- 322.5
  Background counts = 20416.3
  Rate = 2 +/- 0.007
[Tue Aug 14 15:13:01 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 15:13:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 15:13:01 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 15:13:01 2012] Source does appear to be extended
[Tue Aug 14 15:13:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 15:13:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 15:13:24 2012] Initial guess for spatial extent in simple fitting = 5.86"
[Tue Aug 14 15:13:24 2012] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.171
[Tue Aug 14 15:13:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.86"
[Tue Aug 14 15:51:14 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 15:51:14 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 15:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 15:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 15:51:15 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 15:51:15 2012] fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 15:51:15 2012] Fit fullrun_pn_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 17:33:06 2012] Spatial fit model total counts = 104014.000000, observed total counts = 102986.000000
[Tue Aug 14 17:33:06 2012] Offset between fit and detection position for source 1 = 0.000027 pixels
[Tue Aug 14 17:33:06 2012] 103978.100000 total counts/ 20396.000000 bgd. counts: snr = 585.249130
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000027 pixels
  Position = (285.2, 278.2) = 6 41 19.68 82 16 1.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 83582.1 +/- 322.5
  Background counts = 20396.0
  Rate = 2 +/- 0.007
[Tue Aug 14 17:33:06 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 17:33:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 17:33:06 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 17:33:06 2012] Source does appear to be extended
[Tue Aug 14 17:33:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 17:33:36 2012] Counts = 83582.100000, rescaling region sizes by 3.000000
[Tue Aug 14 17:33:36 2012] XMMSAS src. selection expression = ellipse(24765.764140, 24155.693800, 1056.229230, 1056.229230, 0.000000, X, Y)
[Tue Aug 14 17:33:36 2012] Writing source region out to fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 17:33:36 2012] Extracting stamp from image fullrun_pn_xmm0029340201_pi300-10000_cl_sm2.00.img.gz, (225, 218) - (346, 339)
[Tue Aug 14 17:33:36 2012] XMMSAS bgd. selection expression = annulus(24765.764140, 24155.693800, 5281.146152, 10562.292304, X, Y) && !ellipse(17087.690979, 24846.968964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22119.829071, 18758.285858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34986.935600, 16778.590800, 447.324813, 447.324813, 0.000000, X, Y) && !ellipse(22399.396744, 25715.649400, 445.016813, 445.016813, 0.000000, X, Y) && !ellipse(14428.772856, 16254.493774, 544.078852, 424.751071, 53.152203, X, Y) && !ellipse(22541.130200, 27999.496600, 376.708011, 376.708011, 0.000000, X, Y) && !ellipse(14420.535600, 28027.240000, 397.662411, 397.662411, 0.000000, X, Y) && !ellipse(28438.073975, 27790.775177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28301.337311, 27189.405731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25685.746000, 26871.028600, 371.449611, 371.449611, 0.000000, X, Y) && !ellipse(26474.902832, 26836.637299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33266.156760, 26173.349800, 343.716810, 343.716810, 0.000000, X, Y) && !ellipse(13687.186539, 25860.560913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23130.099579, 23770.728943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30027.743561, 22811.607574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24508.943909, 22931.081238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25158.023000, 21761.387000, 481.323214, 481.323214, 0.000000, X, Y) && !ellipse(26176.931549, 19708.365524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35053.297180, 19608.197906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25292.692627, 16766.946182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19634.902191, 16287.559402, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 17:33:36 2012] Writing fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 17:34:44 2012] Mean detx,y = (94.08, -274.51) 
[Tue Aug 14 17:35:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 17:39:04 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 17:39:04 2012] Setting source spectrum file to fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 17:39:04 2012] Setting bgd. spectrum file to fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 20:20:55 2012] Updating aperture counts using extracted products
[Tue Aug 14 20:20:55 2012] Error reading totcts from fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 20:20:55 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 20:20:55 2012] Using photon index=1.80, rate=1.87, arf fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 20:20:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 20:20:55 2012] Updating source flux to 4.5e-12
[Tue Aug 14 20:23:29 2012] Reading fit data from xmm0029340201/analysis//spectral/fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 20:23:29 2012] Spectral fit parameter nH value = 4.22697e+21
[Tue Aug 14 20:23:29 2012] Spectral fit parameter PhoIndex value = 4.86361
[Tue Aug 14 20:23:29 2012] Failed to get F(0.3-8.0) from xmm0029340201/analysis//spectral/fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 20:23:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 20:23:29 2012] Using Nh = 4.2e+21, photon index=4.86, rate=1.87, arf fullrun_pn_xmm0029340201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 20:23:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 20:23:29 2012] Updating source flux to 2.8e-12