[Tue Aug 14 12:09:09 2012] Detection parameters:
  Position = (285.3, 278.1) = 6 41 19.46 82 16 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45257.2 +/- 249.8
  Background counts = 45.6
  Rate = 0.8 +/- 0.004

[Tue Aug 14 12:09:10 2012] Off-axis axis estimate = 1.75'
[Tue Aug 14 13:48:57 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Tue Aug 14 13:48:57 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Tue Aug 14 13:48:57 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.053
[Tue Aug 14 13:48:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Tue Aug 14 15:12:55 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 14 15:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 15:12:55 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 14 15:12:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1.csv
[Tue Aug 14 15:12:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 15:12:55 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 14 15:12:55 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 14 15:12:55 2012] Fit fullrun_mos2_xmm0029340201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 14 15:13:14 2012] Spatial fit model total counts = 40733.300000, observed total counts = 38468.000000
[Tue Aug 14 15:13:14 2012] Offset between fit and detection position for source 1 = 0.119138 pixels
[Tue Aug 14 15:13:14 2012] 40560.400000 total counts/ 10512.200000 bgd. counts: snr = 293.070195
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.119138 pixels
  Position = (285.4, 278.3) = 6 41 19.37 82 16 1.8
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 30048.2 +/- 201.4
  Background counts = 10512.2
  Rate = 0.5 +/- 0.003
[Tue Aug 14 15:13:14 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 15:13:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 15:13:14 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 15:13:14 2012] Source does appear to be extended
[Tue Aug 14 15:13:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 16:35:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 14 16:35:52 2012] Initial guess for spatial extent in simple fitting = 5.29"
[Tue Aug 14 16:35:52 2012] source mask rpix=1.2, npix_max = 11, mask sum = 9, frac = 0.765
[Tue Aug 14 16:35:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Tue Aug 14 17:32:57 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 14 17:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 17:32:57 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 14 17:32:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1.csv
[Tue Aug 14 17:32:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 14 17:32:57 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 14 17:32:57 2012] fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 14 17:32:57 2012] Fit fullrun_mos2_xmm0029340201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 14 17:33:22 2012] Spatial fit model total counts = 40671.500000, observed total counts = 38468.000000
[Tue Aug 14 17:33:22 2012] Offset between fit and detection position for source 1 = 0.000635 pixels
[Tue Aug 14 17:33:22 2012] 40498.000000 total counts/ 10447.200000 bgd. counts: snr = 294.005926
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000635 pixels
  Position = (285.4, 278.3) = 6 41 19.37 82 16 1.8
  Extent = 5.3 (5.2-5.3)", rotation angle = 0
  Source counts = 30050.8 +/- 201.2
  Background counts = 10447.2
  Rate = 0.5 +/- 0.003
[Tue Aug 14 17:33:22 2012] Vigneting correction estimate = 1.000000
[Tue Aug 14 17:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 14 17:33:22 2012] Assessing source extent using major axis lower bound
[Tue Aug 14 17:33:22 2012] Source does appear to be extended
[Tue Aug 14 17:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 14 19:41:15 2012] Counts = 30050.800000, rescaling region sizes by 3.000000
[Tue Aug 14 19:41:15 2012] XMMSAS src. selection expression = ellipse(24778.565200, 24159.491000, 953.141427, 953.141427, 0.000000, X, Y)
[Tue Aug 14 19:41:15 2012] Writing source region out to fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 14 19:41:15 2012] Extracting stamp from image fullrun_mos2_xmm0029340201_pi300-10000_cl_sm2.00.img.gz, (231, 223) - (340, 333)
[Tue Aug 14 19:41:15 2012] XMMSAS bgd. selection expression = annulus(24778.565200, 24159.491000, 4765.707137, 9531.414274, X, Y) && !ellipse(22410.194040, 25719.595800, 442.205613, 396.612011, 24.583662, X, Y) && !ellipse(22035.157840, 33751.434200, 443.379213, 443.379213, 0.000000, X, Y) && !ellipse(17042.449280, 24918.612274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19646.413071, 16235.508881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27367.621918, 16241.602173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32446.252000, 22372.403400, 422.430412, 422.430412, 0.000000, X, Y) && !ellipse(35008.299744, 16733.168900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23151.467255, 23700.397217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14440.075851, 27978.753906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.408800, 16794.816600, 385.412811, 385.412811, 0.000000, X, Y) && !ellipse(30906.985718, 32023.130829, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14400.188019, 16292.031799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23973.958160, 24837.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25185.121460, 21778.306015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26715.185638, 33406.706421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23913.038513, 23533.608276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17700.105347, 28343.188538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35045.340057, 19661.005112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16805.847672, 13962.045792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27045.816437, 13874.623642, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 14 19:41:15 2012] Writing fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1.gif
[Tue Aug 14 19:41:25 2012] Mean detx,y = (75.37, 136.76) 
[Tue Aug 14 19:41:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 14 19:44:40 2012] Binned source spectrum to 10 counts/bin
[Tue Aug 14 19:44:40 2012] Setting source spectrum file to fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 19:44:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 14 20:20:56 2012] Updating aperture counts using extracted products
[Tue Aug 14 20:20:56 2012] Error reading totcts from fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Aug 14 20:20:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 20:20:57 2012] Using photon index=1.80, rate=0.464, arf fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 20:20:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 20:20:57 2012] Updating source flux to 4.8e-12
[Tue Aug 14 20:22:21 2012] Reading fit data from xmm0029340201/analysis//spectral/fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_pl.csv
[Tue Aug 14 20:22:21 2012] Spectral fit parameter nH value = 3.71643e+21
[Tue Aug 14 20:22:21 2012] Spectral fit parameter PhoIndex value = 4.53963
[Tue Aug 14 20:22:21 2012] Failed to get F(0.3-8.0) from xmm0029340201/analysis//spectral/fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Aug 14 20:22:21 2012] Calculating source flux in energy range 0.30-8.00
[Tue Aug 14 20:22:21 2012] Using Nh = 3.7e+21, photon index=4.54, rate=0.464, arf fullrun_mos2_xmm0029340201_pi300-10000_pass1_cl_src1.arf
[Tue Aug 14 20:22:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Aug 14 20:22:21 2012] Updating source flux to 3.1e-12