[Mon Jul 23 13:17:09 2012] Detection parameters:
  Position = (309.9, 319.2) = 6 41 18.61 82 16 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42078.1 +/- 241.8
  Background counts = 56.9
  Rate = 2 +/- 0.01

[Mon Jul 23 13:17:09 2012] Off-axis axis estimate = 1.72'
[Mon Jul 23 13:19:35 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:19:35 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 13:19:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Jul 23 13:19:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Jul 23 13:54:54 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 13:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 13:54:54 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 13:54:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 13:54:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:54:54 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 13:54:54 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 13:54:54 2012] Fit fullrun_pn_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 14:32:21 2012] Spatial fit model total counts = 36396.100000, observed total counts = 36264.000000
[Mon Jul 23 14:32:21 2012] Offset between fit and detection position for source 1 = 0.239095 pixels
[Mon Jul 23 14:32:21 2012] 36417.700000 total counts/ 7167.000000 bgd. counts: snr = 345.515521
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.239095 pixels
  Position = (309.7, 319.4) = 6 41 18.95 82 16 2.6
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 29250.7 +/- 190.8
  Background counts = 7167.0
  Rate = 1 +/- 0.008
[Mon Jul 23 14:32:21 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 14:32:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 14:32:21 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 14:32:21 2012] Source does appear to be extended
[Mon Jul 23 14:32:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 14:32:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 14:32:34 2012] Initial guess for spatial extent in simple fitting = 5.72"
[Mon Jul 23 14:32:34 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.911
[Mon Jul 23 14:32:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.72"
[Mon Jul 23 14:47:51 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 14:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 14:47:51 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 14:47:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 14:47:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 14:47:51 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 14:47:51 2012] fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 14:47:51 2012] Fit fullrun_pn_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 15:22:12 2012] Spatial fit model total counts = 36390.800000, observed total counts = 36264.000000
[Mon Jul 23 15:22:12 2012] Offset between fit and detection position for source 1 = 0.000136 pixels
[Mon Jul 23 15:22:12 2012] 36412.640000 total counts/ 7158.740000 bgd. counts: snr = 345.752618
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000136 pixels
  Position = (309.7, 319.4) = 6 41 18.95 82 16 2.6
  Extent = 5.7 (5.7-5.8)", rotation angle = 0
  Source counts = 29253.9 +/- 190.8
  Background counts = 7158.7
  Rate = 1 +/- 0.008
[Mon Jul 23 15:22:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 15:22:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 15:22:12 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 15:22:12 2012] Source does appear to be extended
[Mon Jul 23 15:22:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 15:22:22 2012] Counts = 29253.900000, rescaling region sizes by 3.000000
[Mon Jul 23 15:22:22 2012] XMMSAS src. selection expression = ellipse(26899.504800, 27740.623800, 1030.269630, 1030.269630, 0.000000, X, Y)
[Mon Jul 23 15:22:22 2012] Writing source region out to fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 15:22:22 2012] Extracting stamp from image fullrun_pn_xmm0029340101_pi300-10000_cl_sm2.00.img.gz, (251, 260) - (369, 379)
[Mon Jul 23 15:22:22 2012] XMMSAS bgd. selection expression = annulus(26899.504800, 27740.623800, 5151.348148, 10302.696296, X, Y) && !ellipse(24581.654541, 29330.947052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19222.000000, 28642.553711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25280.546480, 27237.640000, 435.300813, 435.300813, 0.000000, X, Y) && !ellipse(28306.095123, 23276.004059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33023.896332, 35616.057190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24659.861084, 31604.804413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16572.939209, 31531.732697, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30514.277679, 30927.299347, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.377594, 30462.820557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35382.295135, 29822.361115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.756000, 26541.248000, 1209.464035, 1209.464035, 0.000000, X, Y) && !ellipse(32106.790802, 26433.157806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27366.237740, 25317.343600, 1288.712037, 567.523216, 272.596000, X, Y) && !ellipse(37180.912260, 23244.911400, 406.142412, 395.109611, 90.809943, X, Y) && !ellipse(32011.812439, 22322.543213, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.776428, 22320.342194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16544.414200, 19853.901200, 600.368817, 600.368817, 0.000000, X, Y)
[Mon Jul 23 15:22:22 2012] Writing fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 15:22:49 2012] Mean detx,y = (102.16, -228.30) 
[Mon Jul 23 15:22:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 15:27:28 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 15:27:28 2012] Setting source spectrum file to fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 15:27:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 16:53:08 2012] Updating aperture counts using extracted products
[Mon Jul 23 16:53:08 2012] Error reading totcts from fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 16:53:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 16:53:09 2012] Using photon index=1.80, rate=1.24, arf fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 16:53:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 16:53:09 2012] Updating source flux to 3e-12
[Mon Jul 23 16:54:19 2012] Reading fit data from xmm0029340101/analysis//spectral/fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 16:54:19 2012] Spectral fit parameter nH value = 5.33494e+21
[Mon Jul 23 16:54:19 2012] Spectral fit parameter PhoIndex value = 5.73014
[Mon Jul 23 16:54:19 2012] Failed to get F(0.3-8.0) from xmm0029340101/analysis//spectral/fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 16:54:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 16:54:19 2012] Using Nh = 5.3e+21, photon index=5.73, rate=1.24, arf fullrun_pn_xmm0029340101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 16:54:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 16:54:19 2012] Updating source flux to 1.8e-12