[Mon Jul 23 13:17:43 2012] Detection parameters:
  Position = (380.4, 409.7) = 6 38 44.09 82 22 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 8.1
  Background counts = 7.9
  Rate = 0.003 +/- 0.0008

[Mon Jul 23 13:17:43 2012] Off-axis axis estimate = 10.02'
[Mon Jul 23 13:59:33 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:59:33 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Mon Jul 23 13:59:33 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.072
[Mon Jul 23 13:59:33 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.44"
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13.csv
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13.csv
[Mon Jul 23 14:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon Jul 23 14:32:16 2012] Fit fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon Jul 23 14:32:28 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.985700 pixels away
[Mon Jul 23 14:32:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 14:32:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 14:32:28 2012] Assessing source extent using major
[Mon Jul 23 14:32:28 2012] Source does appear to be extended
[Mon Jul 23 14:32:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 14:51:39 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 14:51:39 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Mon Jul 23 14:51:39 2012] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.072
[Mon Jul 23 14:51:39 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 11.44"
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jul 23 15:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13.csv
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jul 23 15:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13.csv
[Mon Jul 23 15:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jul 23 15:22:08 2012] Fit fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jul 23 15:22:16 2012] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 14.783234 pixels away
[Mon Jul 23 15:22:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 15:22:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 15:22:16 2012] Assessing source extent using major
[Mon Jul 23 15:22:16 2012] Source does appear to be extended
[Mon Jul 23 15:22:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:27:15 2012] XMMSAS src. selection expression = ellipse(33049.143005, 35596.319702, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 16:27:15 2012] Writing source region out to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10_src.reg
[Mon Jul 23 16:27:15 2012] Extracting stamp from image fullrun_mos2_xmm0029340101_pi300-10000_cl_sm2.00.img.gz, (343, 372) - (418, 447)
[Mon Jul 23 16:27:15 2012] XMMSAS bgd. selection expression = annulus(33049.143005, 35596.319702, 1087.500000, 2175.000000, X, Y)
[Mon Jul 23 16:27:15 2012] Writing fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10.gif
[Mon Jul 23 16:38:56 2012] Mean detx,y = (-6780.55, 7347.20) 
[Mon Jul 23 16:38:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:39:13 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:39:13 2012] Setting source spectrum file to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 23 16:39:13 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon Jul 23 16:50:10 2012] Not generating rmf since there are only 34 counts
[Mon Jul 23 16:50:10 2012] rmf not generated due to insufficient counts
[Mon Jul 23 16:53:09 2012] Updating aperture counts using extracted products
[Mon Jul 23 16:53:09 2012] Error reading totcts from fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon Jul 23 16:53:10 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 16:53:10 2012] Using photon index=1.80, rate=0.00333, arf fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src10.arf
[Mon Jul 23 16:53:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 16:53:10 2012] Updating source flux to 6.2e-14
[Mon Jul 23 16:53:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting