[Mon Jul 23 13:17:43 2012] Detection parameters:
  Position = (310.0, 319.1) = 6 41 18.29 82 16 2.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 13957.8 +/- 141.1
  Background counts = 11.6
  Rate = 0.8 +/- 0.008

[Mon Jul 23 13:17:43 2012] Off-axis axis estimate = 1.72'
[Mon Jul 23 13:59:33 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:59:33 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 13:59:33 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Jul 23 13:59:33 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 14:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 14:32:16 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 14:32:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 14:32:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 14:32:27 2012] Source 1 is offset by -3.737576 and -0.242474 pixels which is larger than
2 X fitted extent = 1.290037 x 1.290037, not incorporating fit results
[Mon Jul 23 14:32:28 2012] Source 1 is offset by -7.385622 and 4.710478 pixels which is larger than
2 X fitted extent = 0.804253 x 0.804253, not incorporating fit results
[Mon Jul 23 14:32:28 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 14:32:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 14:32:28 2012] Assessing source extent using major
[Mon Jul 23 14:32:28 2012] Source does appear to be extended
[Mon Jul 23 14:32:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 14:51:39 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 14:51:39 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Mon Jul 23 14:51:39 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Mon Jul 23 14:51:39 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Mon Jul 23 15:22:07 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 15:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 15:22:07 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 15:22:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 15:22:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 15:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 15:22:08 2012] fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 15:22:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 15:22:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0029340101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 15:22:16 2012] Warning, spatial fit 1 centroid is now closest to src. 16
[Mon Jul 23 15:22:16 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 15:22:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 15:22:16 2012] Assessing source extent using major
[Mon Jul 23 15:22:16 2012] Source does appear to be extended
[Mon Jul 23 15:22:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 16:27:15 2012] Counts = 13957.802734, rescaling region sizes by 3.000000
[Mon Jul 23 16:27:15 2012] XMMSAS src. selection expression = ellipse(26925.710876, 27717.071564, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon Jul 23 16:27:15 2012] Writing source region out to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 16:27:15 2012] Extracting stamp from image fullrun_mos2_xmm0029340101_pi300-10000_cl_sm2.00.img.gz, (198, 207) - (423, 432)
[Mon Jul 23 16:27:15 2012] XMMSAS bgd. selection expression = annulus(26925.710876, 27717.071564, 9787.500000, 19575.000000, X, Y) && !ellipse(24533.345600, 29261.237400, 409.813688, 409.813688, 0.000000, X, Y) && !ellipse(37160.828588, 20342.363898, 640.637801, 422.779286, 310.183410, X, Y) && !ellipse(19187.456320, 28467.635600, 664.092819, 664.092819, 0.000000, X, Y) && !ellipse(21909.064000, 17301.028600, 355.235210, 355.235210, 359.900000, X, Y) && !ellipse(24206.636180, 37304.615600, 492.599214, 492.599214, 0.000000, X, Y) && !ellipse(21833.456000, 19837.159600, 470.930414, 470.930414, 0.000000, X, Y) && !ellipse(33567.064000, 15735.028600, 355.235210, 355.235210, 0.000000, X, Y) && !ellipse(13138.517878, 26798.809739, 531.053279, 295.465479, 105.324135, X, Y) && !ellipse(19071.762512, 16852.456711, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27048.861755, 26674.898224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25268.526476, 27230.020400, 253.997607, 253.997607, 0.000000, X, Y) && !ellipse(33049.143005, 35596.319702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29532.246232, 19821.228400, 423.600012, 423.600012, 0.000000, X, Y) && !ellipse(34543.799530, 25972.990199, 436.682222, 165.446983, 314.152439, X, Y) && !ellipse(35384.265200, 29731.739200, 338.692810, 338.692810, 0.000000, X, Y) && !ellipse(27287.514374, 25350.736877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27826.697723, 30468.727997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23186.356000, 41981.315000, 634.017618, 634.017618, 0.000000, X, Y) && !ellipse(25664.171051, 17986.893646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28211.565820, 38220.663200, 473.673614, 473.673614, 0.000000, X, Y) && !ellipse(16573.367996, 31635.018646, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 16:27:15 2012] Writing fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 16:27:19 2012] Mean detx,y = (50.68, 85.55) 
[Mon Jul 23 16:27:20 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 16:36:57 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 16:36:57 2012] Setting source spectrum file to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 16:36:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 16:41:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 16:41:19 2012] rmf not generated due to insufficient counts
[Mon Jul 23 16:53:09 2012] Updating aperture counts using extracted products
[Mon Jul 23 16:53:09 2012] Error reading totcts from fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 16:53:09 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 16:53:09 2012] Using photon index=1.80, rate=0.756, arf fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 16:53:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 16:53:10 2012] Updating source flux to 6.7e-12
[Mon Jul 23 16:53:19 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon Jul 23 16:53:31 2012] xmm0029340101/analysis//spectral/fullrun_mos2_xmm0029340101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete