[Wed Apr 11 06:16:35 2012] Detection parameters:
  Position = (194.6, 437.3) = 10 19 19.87 41 36 59.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.9 +/- 10.9
  Background counts = 15.5
  Rate = 0.002 +/- 0.0004

[Wed Apr 11 06:16:35 2012] Off-axis axis estimate = 12.57'
[Wed Apr 11 06:17:02 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:17:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:17:02 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Wed Apr 11 06:17:02 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.003
[Wed Apr 11 06:17:02 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 12.72"
[Wed Apr 11 06:17:03 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26.ximg exists
[Wed Apr 11 06:17:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26.csv
[Wed Apr 11 06:17:03 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26_1.ximg exists
[Wed Apr 11 06:17:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26.csv
[Wed Apr 11 06:17:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:17:03 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Wed Apr 11 06:17:03 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Wed Apr 11 06:17:03 2012] Fit fullrun_mos2_xmm0028740301_pi300-10000_cl_pass0_tfrozen_src26 appears to have run properly
[Wed Apr 11 06:17:17 2012] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.788376 pixels away
[Wed Apr 11 06:17:17 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:17:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:17:17 2012] Assessing source extent using major
[Wed Apr 11 06:17:17 2012] Source does appear to be extended
[Wed Apr 11 06:17:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:17:30 2012] Using EEF radius (= 12.72 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:17:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:17:30 2012] Initial guess for spatial extent in simple fitting = 12.72"
[Wed Apr 11 06:17:30 2012] source mask rpix=2.9, npix_max = 46, mask sum = 47, frac = 1.003
[Wed Apr 11 06:17:30 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 12.72"
[Wed Apr 11 06:17:31 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26.ximg exists
[Wed Apr 11 06:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26.csv
[Wed Apr 11 06:17:31 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26_1.ximg exists
[Wed Apr 11 06:17:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26.csv
[Wed Apr 11 06:17:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:17:31 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Wed Apr 11 06:17:31 2012] fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Wed Apr 11 06:17:31 2012] Fit fullrun_mos2_xmm0028740301_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Wed Apr 11 06:17:44 2012] Spatial fit model total counts = 126.092000, observed total counts = 126.000000
[Wed Apr 11 06:17:44 2012] Offset between fit and detection position for source 2 = 2.579213 pixels
[Wed Apr 11 06:17:44 2012] 128.489400 total counts/ 63.596400 bgd. counts: snr = 8.137324
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.579213 pixels
  Position = (192.4, 435.9) = 10 19 20.71 41 36 48.9
  Extent = 12.9 (3.2-23.9)", rotation angle = 0
  Source counts = 64.9 +/- 11.3
  Background counts = 63.6
  Rate = 0.003 +/- 0.0004
[Wed Apr 11 06:17:44 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:17:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:17:44 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:17:44 2012] Source does appear to be extended
[Wed Apr 11 06:17:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:18:07 2012] XMMSAS src. selection expression = ellipse(16692.779000, 37877.935400, 774.907979, 774.907979, 0.000000, X, Y)
[Wed Apr 11 06:18:07 2012] Not overwriting source region fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src.reg
[Wed Apr 11 06:18:07 2012] Extracting stamp from image fullrun_mos2_xmm0028740301_pi300-10000_cl_sm2.00.img.gz, (148, 391) - (237, 480)
[Wed Apr 11 06:18:07 2012] XMMSAS bgd. selection expression = annulus(16692.779000, 37877.935400, 1291.513298, 2583.026595, X, Y)
[Wed Apr 11 06:18:07 2012] Writing fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2.gif
[Wed Apr 11 06:18:08 2012] ../../xmm0028740301/products/events/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0028740301/products/events/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Wed Apr 11 06:18:08 2012] Mean detx,y = (-677.51, -16609.70) 
[Wed Apr 11 06:18:08 2012] ../../xmm0028740301/products/images/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src.img and ../../xmm0028740301/products/images/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Wed Apr 11 06:18:08 2012] ../../xmm0028740301/products/spectra/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0028740301/products/spectra/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Wed Apr 11 06:18:08 2012] Setting source spectrum file to fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 06:18:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Apr 11 06:18:08 2012] ../../xmm0028740301/products/lightcurves/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0028740301/products/lightcurves/fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Wed Apr 11 06:18:09 2012] Not generating rmf since there are only 64 counts
[Wed Apr 11 06:18:09 2012] rmf not generated due to insufficient counts
[Wed Apr 11 06:18:09 2012] fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Wed Apr 11 06:18:40 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:18:40 2012] Error reading totcts from fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Apr 11 06:18:41 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:18:41 2012] Using photon index=1.80, rate=0.00252, arf fullrun_mos2_xmm0028740301_pi300-10000_pass1_cl_src2.arf
[Wed Apr 11 06:18:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:18:41 2012] Updating source flux to 6.7e-14
[Wed Apr 11 06:18:44 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting