[Sat Jun  2 00:54:02 2012] Detection parameters:
  Position = (291.8, 294.2) = 0 15 57.31 -39 16 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.8 +/- 14.8
  Background counts = 34.8
  Rate = 0.004 +/- 0.0006

[Sat Jun  2 00:54:03 2012] Off-axis axis estimate = 0.57'
[Sat Jun  2 00:56:58 2012] Using EEF radius (= 6.71 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 00:56:58 2012] Initial guess for spatial extent in simple fitting = 6.71"
[Sat Jun  2 00:56:58 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.958
[Sat Jun  2 00:56:58 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 6.71"
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63.csv
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63.csv
[Sat Jun  2 03:47:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jun  2 03:47:07 2012] Fit fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sat Jun  2 06:21:39 2012] Spatial fit model total counts = 467.717000, observed total counts = 466.000000
[Sat Jun  2 06:21:39 2012] Offset between fit and detection position for source 63 = 1.490806 pixels
[Sat Jun  2 06:21:39 2012] 467.075000 total counts/ 314.477000 bgd. counts: snr = 8.605070
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 1.490806 pixels
  Position = (293.2, 294.8) = 0 15 56.80 -39 16 8.4
  Extent = 13.4 (3.1-26.9)", rotation angle = 0
  Source counts = 152.6 +/- 21.6
  Background counts = 314.5
  Rate = 0.005 +/- 0.0007
[Sat Jun  2 06:21:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:21:39 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 06:21:39 2012] Source does appear to be extended
[Sat Jun  2 06:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:22:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:22:09 2012] Initial guess for spatial extent in simple fitting = 13.43"
[Sat Jun  2 06:22:09 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.952
[Sat Jun  2 06:22:09 2012] Giving source the simple spatial ID 61 for pass 1, mean size = 13.43"
[Sat Jun  2 10:22:24 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61.ximg exists
[Sat Jun  2 10:22:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61.csv
[Sat Jun  2 10:22:24 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61_1.ximg exists
[Sat Jun  2 10:22:24 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61.csv
[Sat Jun  2 10:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 10:22:26 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Sat Jun  2 10:22:26 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Sat Jun  2 10:22:26 2012] Fit fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Sat Jun  2 13:14:57 2012] Warning, spatial fit 61 centroid is now closest to src. 68
[Sat Jun  2 13:14:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 13:14:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 13:14:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 13:14:57 2012] Source does appear to be extended
[Sat Jun  2 13:14:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 13:15:49 2012] XMMSAS src. selection expression = ellipse(25459.170000, 25601.831500, 805.512023, 805.512023, 0.000000, X, Y)
[Sat Jun  2 13:15:49 2012] Writing source region out to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63_src.reg
[Sat Jun  2 13:15:49 2012] Extracting stamp from image fullrun_pn_xmm0028740201_pi300-10000_cl_sm2.00.img.gz, (247, 249) - (339, 341)
[Sat Jun  2 13:15:49 2012] XMMSAS bgd. selection expression = annulus(25459.170000, 25601.831500, 1342.520039, 2685.040077, X, Y) && !ellipse(27419.019600, 22587.139000, 415.759212, 415.759212, 0.000000, X, Y) && !ellipse(25419.066711, 28562.942657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23130.264191, 26461.362183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23682.284607, 26189.973053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24279.074000, 25234.064000, 262.725608, 143.640804, 4.429000, X, Y) && !ellipse(22756.712189, 23668.571381, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 13:15:49 2012] Writing fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63.gif
[Sat Jun  2 14:21:26 2012] Mean detx,y = (-1158.52, 1998.70) 
[Sat Jun  2 14:21:30 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 14:21:56 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 14:21:56 2012] Setting source spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jun  2 14:21:56 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Sat Jun  2 16:44:07 2012] Updating aperture counts using extracted products
[Sat Jun  2 16:44:07 2012] Error reading totcts from fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Sat Jun  2 16:44:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:08 2012] Using photon index=1.80, rate=0.00502, arf fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src63.arf
[Sat Jun  2 16:44:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:08 2012] Updating source flux to 1.4e-14