[Sat Jun  2 00:54:02 2012] Detection parameters:
  Position = (409.3, 379.0) = 0 15 13.39 -39 10 2.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.0 +/- 14.1
  Background counts = 36.7
  Rate = 0.003 +/- 0.0005

[Sat Jun  2 00:54:03 2012] Off-axis axis estimate = 9.93'
[Sat Jun  2 00:56:58 2012] Using EEF radius (= 11.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 00:56:58 2012] Initial guess for spatial extent in simple fitting = 11.39"
[Sat Jun  2 00:56:58 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.925
[Sat Jun  2 00:56:58 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 11.39"
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36.csv
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36_1.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36.csv
[Sat Jun  2 03:47:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Sat Jun  2 03:47:07 2012] Fit fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src36 appears to have run properly
[Sat Jun  2 06:21:39 2012] Spatial fit model total counts = 546.420000, observed total counts = 522.000000
[Sat Jun  2 06:21:39 2012] Offset between fit and detection position for source 36 = 6.471162 pixels
[Sat Jun  2 06:21:39 2012] 588.804000 total counts/ 189.644000 bgd. counts: snr = 28.985277
Spatial fit parameters:
  Offset between fit and detection position for source 36 = 6.471162 pixels
  Position = (404.6, 374.4) = 0 15 15.11 -39 10 21.8
  Extent = 22.8 (17.0-45.6)", rotation angle = 0
  Source counts = 399.2 +/- 24.3
  Background counts = 189.6
  Rate = 0.01 +/- 0.0008
[Sat Jun  2 06:21:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:21:39 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 06:21:39 2012] Source does appear to be extended
[Sat Jun  2 06:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:21:39 2012] Source is confused with source 39
[Sat Jun  2 06:21:39 2012] Source is confused with source 41
[Sat Jun  2 06:22:09 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:22:09 2012] Initial guess for spatial extent in simple fitting = 22.79"
[Sat Jun  2 06:22:09 2012] source mask rpix=5.2, npix_max = 131, mask sum = 115, frac = 0.873
[Sat Jun  2 06:22:09 2012] Giving source the simple spatial ID 36 for pass 1, mean size = 22.79"
[Sat Jun  2 10:22:24 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36.ximg exists
[Sat Jun  2 10:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36.csv
[Sat Jun  2 10:22:24 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36_1.ximg exists
[Sat Jun  2 10:22:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36.csv
[Sat Jun  2 10:22:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 10:22:25 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Sat Jun  2 10:22:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun  2 10:22:25 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Sat Jun  2 10:22:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36.csv
[Sat Jun  2 10:22:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:14:57 2012] Warning, spatial fit 36 centroid is now closest to src. 44
[Sat Jun  2 13:14:57 2012] Spatial fit model total counts = 589.719000, observed total counts = 534.000000
[Sat Jun  2 13:14:57 2012] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun  2 13:14:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 13:14:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 13:14:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 13:14:57 2012] Source does appear to be extended
[Sat Jun  2 13:14:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 13:15:47 2012] XMMSAS src. selection expression = ellipse(35154.698000, 32526.010000, 1367.280039, 1367.280039, 0.000000, X, Y)
[Sat Jun  2 13:15:47 2012] Writing source region out to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36_src.reg
[Sat Jun  2 13:15:47 2012] Extracting stamp from image fullrun_pn_xmm0028740201_pi300-10000_cl_sm2.00.img.gz, (326, 296) - (483, 453)
[Sat Jun  2 13:15:47 2012] XMMSAS bgd. selection expression = annulus(35154.698000, 32526.010000, 2278.800066, 4557.600131, X, Y) && !ellipse(31922.258000, 28999.934800, 1395.340840, 1395.340840, 0.000000, X, Y) && !ellipse(39379.903717, 30988.603973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30671.166540, 27676.799000, 413.134412, 413.134412, 0.000000, X, Y) && !ellipse(40546.401459, 32061.466797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39730.688843, 37447.700836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39087.166000, 36843.724000, 2118.592061, 2118.592061, 0.000000, X, Y) && !ellipse(38589.509460, 36245.253998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31596.095000, 36286.073600, 483.764014, 483.764014, 0.000000, X, Y) && !ellipse(38100.562000, 35655.208000, 2018.280058, 2018.280058, 0.000000, X, Y) && !ellipse(37678.862000, 35193.354000, 1834.360053, 1834.360053, 0.000000, X, Y) && !ellipse(37118.495789, 34673.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36769.208000, 34234.504000, 1886.048054, 1886.048054, 0.000000, X, Y) && !ellipse(36232.401001, 33596.402954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34734.858276, 32031.287079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34548.412000, 31693.368000, 1680.440048, 1680.440048, 0.000000, X, Y) && !ellipse(33607.896576, 30927.477234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37746.604034, 30723.042633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39345.600739, 30083.302704, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38354.804671, 29811.955807, 1267.811047, 799.878829, 359.979048, X, Y) && !ellipse(38370.694000, 29555.686000, 1541.312044, 1541.312044, 0.000000, X, Y) && !ellipse(31141.191162, 29566.928711, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun  2 13:15:47 2012] Writing fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36.gif
[Sat Jun  2 14:00:28 2012] Mean detx,y = (1352.96, -9634.56) 
[Sat Jun  2 14:00:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 14:01:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 14:01:44 2012] Setting source spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jun  2 14:01:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Jun  2 16:44:07 2012] Updating aperture counts using extracted products
[Sat Jun  2 16:44:07 2012] Error reading totcts from fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Jun  2 16:44:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:08 2012] Using photon index=1.80, rate=0.0131, arf fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src36.arf
[Sat Jun  2 16:44:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:08 2012] Updating source flux to 5.1e-14
[Sat Jun  2 16:44:58 2012] Flag p found in src. 36 procflags, skipping spectral fitting
[Sat Jun  2 16:44:58 2012] Flag c found in src. 36 procflags, skipping spectral fitting