[Sat Jun  2 00:54:02 2012] Detection parameters:
  Position = (339.5, 148.3) = 0 15 39.41 -39 26 45.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.8 +/- 17.9
  Background counts = 25.9
  Rate = 0.006 +/- 0.0006

[Sat Jun  2 00:54:03 2012] Off-axis axis estimate = 11.29'
[Sat Jun  2 00:56:58 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 00:56:58 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Sat Jun  2 00:56:58 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.142
[Sat Jun  2 00:56:58 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.07"
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17.csv
[Sat Jun  2 03:47:06 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17_1.ximg exists
[Sat Jun  2 03:47:06 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17.csv
[Sat Jun  2 03:47:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sat Jun  2 03:47:07 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sat Jun  2 03:47:07 2012] Fit fullrun_pn_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sat Jun  2 06:21:39 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 15.265865 pixels away
[Sat Jun  2 06:21:39 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:21:39 2012] Assessing source extent using major
[Sat Jun  2 06:21:39 2012] Source does appear to be extended
[Sat Jun  2 06:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 06:22:09 2012] Using EEF radius (= 12.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 06:22:09 2012] Initial guess for spatial extent in simple fitting = 12.07"
[Sat Jun  2 06:22:09 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.142
[Sat Jun  2 06:22:09 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 12.07"
[Sat Jun  2 10:22:23 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17.ximg exists
[Sat Jun  2 10:22:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17.csv
[Sat Jun  2 10:22:23 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Jun  2 10:22:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17.csv
[Sat Jun  2 10:22:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 10:22:25 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Jun  2 10:22:25 2012] fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Jun  2 10:22:25 2012] Fit fullrun_pn_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Jun  2 13:14:57 2012] Spatial fit model total counts = 518.527000, observed total counts = 512.000000
[Sat Jun  2 13:14:57 2012] Offset between fit and detection position for source 17 = 0.107640 pixels
[Sat Jun  2 13:14:57 2012] 523.159000 total counts/ 407.555000 bgd. counts: snr = 5.726375
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 0.107640 pixels
  Position = (339.6, 148.3) = 0 15 39.38 -39 26 45.6
  Extent = 5.9 (4.8-7.0)", rotation angle = 0
  Source counts = 115.6 +/- 22.9
  Background counts = 407.6
  Rate = 0.004 +/- 0.0008
[Sat Jun  2 13:14:57 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 13:14:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 13:14:57 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 13:14:57 2012] Source does appear to be extended
[Sat Jun  2 13:14:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 13:15:47 2012] XMMSAS src. selection expression = ellipse(29496.025240, 12855.874320, 355.067410, 355.067410, 0.000000, X, Y)
[Sat Jun  2 13:15:47 2012] Writing source region out to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17_src.reg
[Sat Jun  2 13:15:47 2012] Extracting stamp from image fullrun_pn_xmm0028740201_pi300-10000_cl_sm2.00.img.gz, (319, 128) - (360, 169)
[Sat Jun  2 13:15:47 2012] XMMSAS bgd. selection expression = annulus(29496.025240, 12855.874320, 591.779017, 1183.558034, X, Y)
[Sat Jun  2 13:15:47 2012] Writing fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17.gif
[Sat Jun  2 13:42:51 2012] Mean detx,y = (10411.62, 8670.66) 
[Sat Jun  2 13:42:54 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 13:43:07 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 13:43:07 2012] Setting source spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  2 13:43:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Jun  2 16:44:07 2012] Updating aperture counts using extracted products
[Sat Jun  2 16:44:07 2012] Error reading totcts from fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Jun  2 16:44:08 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:08 2012] Using photon index=1.80, rate=0.0038, arf fullrun_pn_xmm0028740201_pi300-10000_pass1_cl_src17.arf
[Sat Jun  2 16:44:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:08 2012] Updating source flux to 2.5e-14