[Sat Jun  2 00:55:03 2012] Detection parameters:
  Position = (353.2, 318.9) = 0 15 34.32 -39 14 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 941.0 +/- 37.5
  Background counts = 13.2
  Rate = 0.03 +/- 0.001

[Sat Jun  2 00:55:04 2012] Off-axis axis estimate = 4.24'
[Sat Jun  2 04:52:02 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 04:52:02 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sat Jun  2 04:52:02 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Sat Jun  2 04:52:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 8.55"
[Sat Jun  2 06:21:20 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3.ximg exists
[Sat Jun  2 06:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3.csv
[Sat Jun  2 06:21:20 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat Jun  2 06:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3.csv
[Sat Jun  2 06:21:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 06:21:21 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat Jun  2 06:21:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  2 06:21:21 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat Jun  2 06:21:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Sat Jun  2 06:21:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 06:21:53 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.047793 pixels away
[Sat Jun  2 06:21:53 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:21:53 2012] Assessing source extent using major
[Sat Jun  2 06:21:53 2012] Source does appear to be extended
[Sat Jun  2 06:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 11:41:51 2012] Using EEF radius (= 8.55 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 11:41:51 2012] Initial guess for spatial extent in simple fitting = 8.55"
[Sat Jun  2 11:41:51 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.028
[Sat Jun  2 11:41:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.55"
[Sat Jun  2 13:14:29 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3.ximg exists
[Sat Jun  2 13:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3.csv
[Sat Jun  2 13:14:29 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sat Jun  2 13:14:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3.csv
[Sat Jun  2 13:14:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:14:30 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sat Jun  2 13:14:30 2012] fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sat Jun  2 13:14:30 2012] Fit fullrun_mos2_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sat Jun  2 13:15:18 2012] Spatial fit model total counts = 1069.290000, observed total counts = 1027.000000
[Sat Jun  2 13:15:18 2012] Offset between fit and detection position for source 4 = 0.180415 pixels
[Sat Jun  2 13:15:18 2012] 1087.103000 total counts/ 461.764000 bgd. counts: snr = 29.100837
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.180415 pixels
  Position = (353.1, 318.7) = 0 15 34.37 -39 14 24.3
  Extent = 4.8 (4.5-5.2)", rotation angle = 0
  Source counts = 625.3 +/- 33.0
  Background counts = 461.8
  Rate = 0.02 +/- 0.001
[Sat Jun  2 13:15:18 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 13:15:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 13:15:18 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 13:15:18 2012] Source does appear to be extended
[Sat Jun  2 13:15:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 16:10:48 2012] XMMSAS src. selection expression = ellipse(30672.858680, 27680.875200, 287.770808, 287.770808, 0.000000, X, Y)
[Sat Jun  2 16:10:48 2012] Writing source region out to fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4_src.reg
[Sat Jun  2 16:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0028740201_pi300-10000_cl_sm2.00.img.gz, (337, 302) - (370, 335)
[Sat Jun  2 16:10:48 2012] XMMSAS bgd. selection expression = annulus(30672.858680, 27680.875200, 479.618014, 959.236028, X, Y) && !ellipse(31927.253200, 28988.691800, 1306.406438, 1306.406438, 0.000000, X, Y) && !ellipse(30776.417800, 26729.771640, 357.812010, 357.812010, 0.000000, X, Y)
[Sat Jun  2 16:10:48 2012] Writing fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4.gif
[Sat Jun  2 16:14:22 2012] Mean detx,y = (-1082.27, 2905.10) 
[Sat Jun  2 16:14:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 16:14:31 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 16:14:31 2012] Setting source spectrum file to fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun  2 16:14:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sat Jun  2 16:44:09 2012] Updating aperture counts using extracted products
[Sat Jun  2 16:44:09 2012] Error reading totcts from fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sat Jun  2 16:44:10 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:10 2012] Using photon index=1.80, rate=0.0189, arf fullrun_mos2_xmm0028740201_pi300-10000_pass1_cl_src4.arf
[Sat Jun  2 16:44:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:10 2012] Updating source flux to 2.8e-13