[Sat Jun  2 00:54:32 2012] Detection parameters:
  Position = (367.8, 333.9) = 0 15 28.86 -39 13 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 15414.3 +/- 149.0
  Background counts = 13.3
  Rate = 0.5 +/- 0.005

[Sat Jun  2 00:54:32 2012] Off-axis axis estimate = 5.65'
[Sat Jun  2 03:47:08 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Sat Jun  2 03:47:08 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Sat Jun  2 03:47:08 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087
[Sat Jun  2 03:47:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.25"
[Sat Jun  2 04:52:01 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun  2 04:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 04:52:01 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun  2 04:52:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1.csv
[Sat Jun  2 04:52:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 04:52:01 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun  2 04:52:01 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun  2 04:52:01 2012] Fit fullrun_mos1_xmm0028740201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun  2 06:21:47 2012] Spatial fit model total counts = 12741.300000, observed total counts = 13709.000000
[Sat Jun  2 06:21:47 2012] Offset between fit and detection position for source 1 = 0.251241 pixels
[Sat Jun  2 06:21:47 2012] 12971.526000 total counts/ 918.626000 bgd. counts: snr = 397.669412
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.251241 pixels
  Position = (367.7, 333.7) = 0 15 28.93 -39 13 19.2
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 12052.9 +/- 113.9
  Background counts = 918.6
  Rate = 0.4 +/- 0.003
[Sat Jun  2 06:21:47 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 06:21:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 06:21:47 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 06:21:47 2012] Source does appear to be extended
[Sat Jun  2 06:21:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 10:22:26 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun  2 10:22:26 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Sat Jun  2 10:22:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.999
[Sat Jun  2 10:22:26 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.53"
[Sat Jun  2 11:41:50 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun  2 11:41:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 11:41:50 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun  2 11:41:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1.csv
[Sat Jun  2 11:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 11:41:50 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun  2 11:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  2 11:41:50 2012] fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun  2 11:41:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun  2 11:41:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun  2 13:15:08 2012] Warning, spatial fit 1 centroid is now closest to src. 26
[Sat Jun  2 13:15:08 2012] Vigneting correction estimate = 1.000000
[Sat Jun  2 13:15:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun  2 13:15:08 2012] Assessing source extent using major axis lower bound
[Sat Jun  2 13:15:08 2012] Source does appear to be extended
[Sat Jun  2 13:15:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun  2 15:39:37 2012] Counts = 12052.900000, rescaling region sizes by 3.000000
[Sat Jun  2 15:39:37 2012] XMMSAS src. selection expression = ellipse(31938.027680, 28982.779600, 1175.122842, 1175.122842, 0.000000, X, Y)
[Sat Jun  2 15:39:37 2012] Writing source region out to fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun  2 15:39:37 2012] Extracting stamp from image fullrun_mos1_xmm0028740201_pi300-10000_cl_sm2.00.img.gz, (300, 266) - (435, 401)
[Sat Jun  2 15:39:38 2012] XMMSAS bgd. selection expression = annulus(31938.027680, 28982.779600, 5875.614212, 11751.228424, X, Y) && !ellipse(40544.919952, 32064.289093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41996.238617, 27445.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30695.013489, 27682.264130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39496.732000, 31067.516000, 1148.136033, 1148.136033, 0.000000, X, Y) && !ellipse(27427.011640, 22589.038400, 457.504813, 457.504813, 0.000000, X, Y) && !ellipse(23685.950000, 30968.614000, 230.554407, 230.554407, 0.000000, X, Y) && !ellipse(31614.039180, 36263.766600, 501.043214, 501.043214, 0.000000, X, Y) && !ellipse(24052.412000, 30348.764200, 270.465608, 270.465608, 0.000000, X, Y) && !ellipse(28389.837402, 30396.481995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29817.656403, 29776.861877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30747.355320, 26715.367000, 352.944810, 352.944810, 0.000000, X, Y) && !ellipse(37757.452484, 30726.334869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24317.861450, 25287.855164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22212.123640, 20687.682800, 216.075206, 216.075206, 0.000000, X, Y) && !ellipse(23151.148651, 26494.149139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38505.062000, 29775.809000, 455.768013, 455.768013, 0.000000, X, Y) && !ellipse(39006.967800, 18327.113600, 452.670413, 452.670413, 0.000000, X, Y) && !ellipse(36820.243073, 24701.189270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34003.861600, 22051.449200, 339.540810, 339.540810, 0.000000, X, Y) && !ellipse(34793.319366, 19725.154602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34163.283569, 33837.081360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22776.970600, 23777.193240, 241.288807, 241.288807, 0.000000, X, Y) && !ellipse(24821.438202, 22024.619720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38580.312439, 30272.786835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40847.931480, 34153.420200, 315.036981, 315.036981, 0.000000, X, Y) && !ellipse(24868.866600, 40912.198800, 705.618904, 705.618904, 0.000000, X, Y) && !ellipse(28413.896160, 20087.112800, 289.738408, 289.738408, 0.000000, X, Y) && !ellipse(33212.522888, 33206.033997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41259.271515, 18020.097443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26363.405400, 31734.868600, 506.658415, 506.658415, 0.000000, X, Y) && !ellipse(22675.396606, 31288.250580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.707947, 38345.371552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27449.356000, 40583.605200, 485.105614, 485.105614, 0.000000, X, Y)
[Sat Jun  2 15:39:38 2012] Writing fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1.gif
[Sat Jun  2 15:39:43 2012] Mean detx,y = (4936.30, 967.93) 
[Sat Jun  2 15:39:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun  2 15:43:41 2012] Binned source spectrum to 10 counts/bin
[Sat Jun  2 15:43:41 2012] Setting source spectrum file to fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 15:43:41 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 16:44:08 2012] Updating aperture counts using extracted products
[Sat Jun  2 16:44:08 2012] Error reading totcts from fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 16:44:09 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:09 2012] Using photon index=1.80, rate=0.365, arf fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 16:44:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:09 2012] Updating source flux to 3.7e-12
[Sat Jun  2 16:44:26 2012] Reading fit data from xmm0028740201/analysis//spectral/fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 16:44:26 2012] Spectral fit parameter nH value = 3.86657e+21
[Sat Jun  2 16:44:26 2012] Spectral fit parameter PhoIndex value = 3.38788
[Sat Jun  2 16:44:26 2012] Failed to get F(0.3-8.0) from xmm0028740201/analysis//spectral/fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 16:44:26 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 16:44:26 2012] Using Nh = 3.9e+21, photon index=3.39, rate=0.365, arf fullrun_mos1_xmm0028740201_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 16:44:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 16:44:26 2012] Updating source flux to 2.8e-12