[Sun May 27 20:40:44 2012] Detection parameters:
  Position = (257.1, 281.2) = 0 14 57.17 -39 12 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.4 +/- 14.3
  Background counts = 53.4
  Rate = 0.004 +/- 0.0008

[Sun May 27 20:40:44 2012] Off-axis axis estimate = 3.25'
[Sun May 27 20:42:59 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun May 27 20:42:59 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun May 27 20:42:59 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sun May 27 20:42:59 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 8.05"
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src38.ximg exists
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src38_1.ximg exists
[Sun May 27 21:48:34 2012] Fit fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src38 appears to have run properly
[Sun May 27 21:48:35 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Sun May 27 21:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun May 27 21:48:35 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Sun May 27 21:48:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38.csv
[Sun May 27 21:48:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:32:31 2012] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 12.108577 pixels away
[Sun May 27 23:32:31 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:31 2012] Assessing source extent using major
[Sun May 27 23:32:31 2012] Source does appear to be extended
[Sun May 27 23:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:32:57 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:32:57 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun May 27 23:32:57 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sun May 27 23:32:57 2012] Giving source the simple spatial ID 38 for pass 1, mean size = 8.05"
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38.csv
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38_1.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38.csv
[Mon May 28 00:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38.csv
[Mon May 28 00:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:31:13 2012] Source 38 is offset by -0.519952 and -8.239941 pixels which is larger than
2 X fitted extent = 2.624087 x 2.624087, not incorporating fit results
[Mon May 28 01:31:13 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:13 2012] Assessing source extent using major
[Mon May 28 01:31:13 2012] Source does appear to be extended
[Mon May 28 01:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:31:31 2012] XMMSAS src. selection expression = ellipse(22318.719971, 24412.845123, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing source region out to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38_src.reg
[Mon May 28 01:31:31 2012] Extracting stamp from image fullrun_pn_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (220, 244) - (295, 319)
[Mon May 28 01:31:31 2012] XMMSAS bgd. selection expression = annulus(22318.719971, 24412.845123, 1087.500000, 2175.000000, X, Y) && !ellipse(22356.673800, 25400.542000, 449.860013, 449.860013, 0.000000, X, Y) && !ellipse(23521.804016, 26483.234314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20696.424057, 25086.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21424.299600, 24320.718320, 951.872027, 951.872027, 0.000000, X, Y) && !ellipse(20582.489000, 26476.429400, 529.392782, 529.392782, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38.gif
[Mon May 28 01:56:09 2012] Mean detx,y = (-2812.95, 5036.66) 
[Mon May 28 01:56:11 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:56:26 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:56:27 2012] Setting source spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 01:56:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 28 02:25:59 2012] Not generating rmf since there are only 74 counts
[Mon May 28 02:25:59 2012] rmf not generated due to insufficient counts
[Mon May 28 03:39:19 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:19 2012] Error reading totcts from fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 03:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:19 2012] Using photon index=1.80, rate=0.00392, arf fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src38.arf
[Mon May 28 03:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:19 2012] Updating source flux to 1.4e-14
[Mon May 28 03:40:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting