[Sun May 27 20:40:44 2012] Detection parameters:
  Position = (246.2, 279.1) = 0 15 1.26 -39 12 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.5 +/- 17.8
  Background counts = 51.8
  Rate = 0.007 +/- 0.001

[Sun May 27 20:40:44 2012] Off-axis axis estimate = 4.04'
[Sun May 27 20:42:59 2012] Using EEF radius (= 8.45 ")to estimate initial spatial extent for simple fitting
[Sun May 27 20:42:59 2012] Initial guess for spatial extent in simple fitting = 8.45"
[Sun May 27 20:42:59 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.048
[Sun May 27 20:42:59 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 8.45"
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25.csv
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25.csv
[Sun May 27 21:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:48:35 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 27 21:48:35 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 27 21:48:35 2012] Fit fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun May 27 23:32:31 2012] Spatial fit model total counts = 910.206000, observed total counts = 834.000000
[Sun May 27 23:32:31 2012] Offset between fit and detection position for source 25 = 1.201809 pixels
[Sun May 27 23:32:31 2012] 905.269000 total counts/ 714.496000 bgd. counts: snr = 7.137022
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 1.201809 pixels
  Position = (246.8, 280.1) = 0 15 1.02 -39 12 33.0
  Extent = 11.9 (8.7-16.9)", rotation angle = 0
  Source counts = 190.8 +/- 30.1
  Background counts = 714.5
  Rate = 0.007 +/- 0.001
[Sun May 27 23:32:31 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:31 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:32:31 2012] Source does appear to be extended
[Sun May 27 23:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:32:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 23:32:57 2012] Initial guess for spatial extent in simple fitting = 11.90"
[Sun May 27 23:32:57 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.860
[Sun May 27 23:32:57 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.90"
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 28 00:24:52 2012] Fit fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src25 appears to have run properly
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25.csv
[Mon May 28 00:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:31:13 2012] Warning, spatial fit 25 centroid is now closest to src. 22
[Mon May 28 01:31:13 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:13 2012] Assessing source extent using major axis lower bound
[Mon May 28 01:31:13 2012] Source does appear to be extended
[Mon May 28 01:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:31:31 2012] XMMSAS src. selection expression = ellipse(21424.299600, 24320.718320, 713.904021, 713.904021, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing source region out to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25_src.reg
[Mon May 28 01:31:31 2012] Extracting stamp from image fullrun_pn_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (206, 239) - (288, 321)
[Mon May 28 01:31:31 2012] XMMSAS bgd. selection expression = annulus(21424.299600, 24320.718320, 1189.840034, 2379.680068, X, Y) && !ellipse(22356.673800, 25400.542000, 449.860013, 449.860013, 0.000000, X, Y) && !ellipse(23521.804016, 26483.234314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20696.424057, 25086.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20582.489000, 26476.429400, 529.392782, 529.392782, 0.000000, X, Y) && !ellipse(22318.719971, 24412.845123, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25.gif
[Mon May 28 01:49:57 2012] Mean detx,y = (-3176.67, 5685.37) 
[Mon May 28 01:49:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:50:12 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:50:12 2012] Setting source spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 28 01:50:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Mon May 28 03:39:19 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:19 2012] Error reading totcts from fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May 28 03:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:19 2012] Using photon index=1.80, rate=0.00702, arf fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src25.arf
[Mon May 28 03:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:19 2012] Updating source flux to 2.4e-14