[Sun May 27 20:40:44 2012] Detection parameters:
  Position = (358.4, 298.5) = 0 14 19.26 -39 11 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2083.6 +/- 54.5
  Background counts = 41.3
  Rate = 0.1 +/- 0.003

[Sun May 27 20:40:44 2012] Off-axis axis estimate = 4.35'
[Sun May 27 20:42:59 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun May 27 20:42:59 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Sun May 27 20:42:59 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.896
[Sun May 27 20:42:59 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.60"
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2.csv
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2.csv
[Sun May 27 21:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Sun May 27 21:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:32:31 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.522247 pixels away
[Sun May 27 23:32:31 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:31 2012] Assessing source extent using major
[Sun May 27 23:32:31 2012] Source does appear to be extended
[Sun May 27 23:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:32:57 2012] Using EEF radius (= 8.60 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:32:57 2012] Initial guess for spatial extent in simple fitting = 8.60"
[Sun May 27 23:32:57 2012] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.896
[Sun May 27 23:32:57 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 8.60"
[Mon May 28 00:24:51 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src2.ximg exists
[Mon May 28 00:24:51 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon May 28 00:24:51 2012] Fit fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon May 28 00:24:52 2012] Fit fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon May 28 01:31:13 2012] Spatial fit model total counts = 2293.410000, observed total counts = 2086.000000
[Mon May 28 01:31:13 2012] Offset between fit and detection position for source 2 = 0.267097 pixels
[Mon May 28 01:31:13 2012] 2298.669000 total counts/ 917.859000 bgd. counts: snr = 45.577021
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.267097 pixels
  Position = (358.2, 298.3) = 0 14 19.33 -39 11 13.9
  Extent = 5.0 (4.8-5.3)", rotation angle = 0
  Source counts = 1380.8 +/- 47.9
  Background counts = 917.9
  Rate = 0.05 +/- 0.002
[Mon May 28 01:31:13 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:13 2012] Assessing source extent using major axis lower bound
[Mon May 28 01:31:13 2012] Source does appear to be extended
[Mon May 28 01:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:31:31 2012] Counts = 1380.810000, rescaling region sizes by 2.000000
[Mon May 28 01:31:31 2012] XMMSAS src. selection expression = ellipse(31117.787600, 25901.918400, 603.631217, 603.631217, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing source region out to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_src.reg
[Mon May 28 01:31:31 2012] Extracting stamp from image fullrun_pn_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (324, 264) - (393, 333)
[Mon May 28 01:31:31 2012] XMMSAS bgd. selection expression = annulus(31117.787600, 25901.918400, 2012.104058, 4024.208116, X, Y) && !ellipse(28517.089600, 23829.809800, 432.136012, 432.136012, 0.000000, X, Y) && !ellipse(31865.761932, 22822.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28782.407379, 29863.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35641.133942, 29177.186340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33199.039100, 28862.266800, 580.332017, 580.332017, 0.000000, X, Y) && !ellipse(32398.947571, 27540.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31144.681400, 27024.733000, 355.755210, 355.755210, 0.000000, X, Y) && !ellipse(26689.423800, 24154.305200, 457.888013, 457.888013, 0.000000, X, Y) && !ellipse(34892.644200, 23635.127800, 777.969622, 777.969622, 0.000000, X, Y) && !ellipse(26671.550232, 21017.938812, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2.gif
[Mon May 28 01:37:19 2012] Mean detx,y = (2710.22, -2077.91) 
[Mon May 28 01:37:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:37:51 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:37:51 2012] Setting source spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 01:37:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon May 28 03:39:19 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:19 2012] Error reading totcts from fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon May 28 03:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:19 2012] Using photon index=1.80, rate=0.0508, arf fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2.arf
[Mon May 28 03:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:19 2012] Updating source flux to 1.5e-13
[Mon May 28 03:41:46 2012] Reading fit data from xmm0028740101/analysis//spectral/fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_pl.csv
[Mon May 28 03:41:46 2012] Spectral fit parameter nH value = 2.42893e+21
[Mon May 28 03:41:46 2012] Spectral fit parameter PhoIndex value = 1.84568
[Mon May 28 03:41:46 2012] Failed to get F(0.3-8.0) from xmm0028740101/analysis//spectral/fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon May 28 03:41:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:41:46 2012] Using Nh = 2.4e+21, photon index=1.85, rate=0.0508, arf fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src2.arf
[Mon May 28 03:41:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:41:46 2012] Updating source flux to 2.3e-13