[Sun May 27 20:40:44 2012] Detection parameters:
  Position = (172.1, 268.5) = 0 15 29.00 -39 13 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 17260.4 +/- 169.1
  Background counts = 42.4
  Rate = 0.6 +/- 0.006

[Sun May 27 20:40:44 2012] Off-axis axis estimate = 9.41'
[Sun May 27 20:42:59 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Sun May 27 20:42:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 20:42:59 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Sun May 27 20:42:59 2012] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.854
[Sun May 27 20:42:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.14"
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 21:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 27 21:48:34 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 21:48:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May 27 21:48:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:32:31 2012] Spatial fit model total counts = 19670.100000, observed total counts = 17521.000000
[Sun May 27 23:32:31 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 23:32:31 2012] Source 1 is offset by 4.242354 and 3.653685 pixels which is larger than
2 X fitted extent = 1.354708 x 1.354708, not incorporating fit results
[Sun May 27 23:32:31 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:31 2012] Assessing source extent using major
[Sun May 27 23:32:31 2012] Source does appear to be extended
[Sun May 27 23:32:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:32:57 2012] Using EEF radius (= 11.14 ")to estimate initial spatial extent for simple fitting
[Sun May 27 23:32:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 23:32:57 2012] Initial guess for spatial extent in simple fitting = 11.14"
[Sun May 27 23:32:57 2012] source mask rpix=2.6, npix_max = 37, mask sum = 32, frac = 0.854
[Sun May 27 23:32:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.14"
[Mon May 28 00:24:51 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 00:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:24:51 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 00:24:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:24:51 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 00:24:52 2012] fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 00:24:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May 28 00:24:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:31:13 2012] Spatial fit model total counts = 19671.000000, observed total counts = 17521.000000
[Mon May 28 01:31:13 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 01:31:13 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:13 2012] Assessing source extent using major
[Mon May 28 01:31:13 2012] Source does appear to be extended
[Mon May 28 01:31:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:31:31 2012] Counts = 17260.367188, rescaling region sizes by 3.000000
[Mon May 28 01:31:31 2012] XMMSAS src. selection expression = ellipse(14922.462814, 23310.248627, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing source region out to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 01:31:31 2012] Extracting stamp from image fullrun_pn_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (60, 156) - (285, 381)
[Mon May 28 01:31:31 2012] XMMSAS bgd. selection expression = annulus(14922.462814, 23310.248627, 9787.500000, 19575.000000, X, Y) && !ellipse(31117.787600, 25901.918400, 402.420812, 402.420812, 0.000000, X, Y) && !ellipse(22356.673800, 25400.542000, 449.860013, 449.860013, 0.000000, X, Y) && !ellipse(13682.940400, 21718.274000, 1900.704055, 1900.704055, 0.000000, X, Y) && !ellipse(24972.455600, 21872.515600, 440.440813, 440.440813, 0.000000, X, Y) && !ellipse(23521.804016, 26483.234314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25234.518345, 25458.112582, 446.877121, 365.899781, 66.967438, X, Y) && !ellipse(32678.238068, 41046.778900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27137.598145, 40394.759460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20639.626000, 39722.548800, 473.420014, 473.420014, 0.000000, X, Y) && !ellipse(29147.473907, 36065.744812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22941.958893, 34430.841492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24179.319366, 12370.820358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25614.128780, 31558.541400, 382.883211, 382.883211, 0.000000, X, Y) && !ellipse(14584.594406, 30680.089569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23839.639800, 28557.193000, 397.347211, 397.347211, 0.000000, X, Y) && !ellipse(20696.424057, 25086.858826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11312.833664, 24758.591003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12804.002947, 24336.663801, 697.235635, 228.442273, 91.220483, X, Y) && !ellipse(21424.299600, 24320.718320, 951.872027, 951.872027, 0.000000, X, Y) && !ellipse(28517.089600, 23829.809800, 432.136012, 432.136012, 0.000000, X, Y) && !ellipse(31865.761932, 22822.679047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13743.993546, 21120.498611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29089.968628, 37857.005463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28782.407379, 29863.341492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33199.039100, 28862.266800, 580.332017, 580.332017, 0.000000, X, Y) && !ellipse(32398.947571, 27540.613007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31144.681400, 27024.733000, 355.755210, 355.755210, 0.000000, X, Y) && !ellipse(20582.489000, 26476.429400, 529.392782, 529.392782, 0.000000, X, Y) && !ellipse(22318.719971, 24412.845123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26689.423800, 24154.305200, 457.888013, 457.888013, 0.000000, X, Y) && !ellipse(18346.874600, 24127.619600, 613.692116, 613.692116, 0.000000, X, Y) && !ellipse(29594.190600, 18022.233000, 404.288812, 404.288812, 0.000000, X, Y) && !ellipse(34892.644200, 23635.127800, 777.969622, 777.969622, 0.000000, X, Y) && !ellipse(26671.550232, 21017.938812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26916.914764, 19838.635864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24289.643400, 19879.804800, 432.634412, 432.634412, 0.000000, X, Y) && !ellipse(22586.752380, 19801.449800, 447.509613, 447.509613, 0.000000, X, Y) && !ellipse(19714.565200, 19091.529882, 961.456028, 419.930412, 40.034397, X, Y) && !ellipse(31600.643982, 11459.250565, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 01:31:31 2012] Writing fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 01:31:51 2012] Mean detx,y = (-7270.07, 10901.05) 
[Mon May 28 01:31:56 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:37:06 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:37:06 2012] Setting source spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 01:37:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 02:01:52 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon May 28 02:01:52 2012] rmf not generated due to insufficient counts
[Mon May 28 03:39:19 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:19 2012] Error reading totcts from fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:39:19 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:19 2012] Using photon index=1.80, rate=0.61, arf fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 03:39:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:19 2012] Updating source flux to 3.1e-12
[Mon May 28 03:40:55 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Mon May 28 03:41:46 2012] xmm0028740101/analysis//spectral/fullrun_pn_xmm0028740101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete