[Sun May 27 20:41:20 2012] Detection parameters:
  Position = (172.6, 269.2) = 0 15 28.82 -39 13 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8915.1 +/- 111.2
  Background counts = 12.7
  Rate = 0.3 +/- 0.004

[Sun May 27 20:41:21 2012] Off-axis axis estimate = 9.37'
[Sun May 27 22:38:24 2012] Using EEF radius (= 11.11 ")to estimate initial spatial extent for simple fitting
[Sun May 27 22:38:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 22:38:24 2012] Initial guess for spatial extent in simple fitting = 11.11"
[Sun May 27 22:38:24 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.964
[Sun May 27 22:38:24 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.11"
[Sun May 27 23:32:19 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 23:32:19 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 23:32:19 2012] Fit fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_src1 appears to have run properly
[Sun May 27 23:32:20 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 23:32:20 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 23:32:20 2012] Fit fullrun_mos2_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 23:32:45 2012] Spatial fit model total counts = 8672.000000, observed total counts = 8672.000000
[Sun May 27 23:32:45 2012] Offset between fit and detection position for source 1 = 0.136441 pixels
[Sun May 27 23:32:45 2012] 8706.290000 total counts/ 1650.570000 bgd. counts: snr = 173.669824
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.136441 pixels
  Position = (172.6, 269.3) = 0 15 28.80 -39 13 19.6
  Extent = 8.7" x 5.0", rotation angle = 78
  Source counts = 7055.7 +/- 93.3
  Background counts = 1650.6
  Rate = 0.2 +/- 0.003
[Sun May 27 23:32:45 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:45 2012] Assessing source extent using major
[Sun May 27 23:32:45 2012] Source does appear to be extended
[Sun May 27 23:32:45 2012] Computing asymmetry using major and minor axis, asym = 1.73
[Sun May 27 23:32:45 2012] Source is asymmetric
[Mon May 28 00:58:06 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:58:06 2012] Initial guess for spatial extent in simple fitting = 6.86"
[Mon May 28 00:58:06 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.928
[Mon May 28 00:58:06 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.86"
[Mon May 28 01:31:06 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 01:31:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 01:31:06 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 01:31:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 01:31:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:31:06 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 01:31:06 2012] fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 01:31:06 2012] Fit fullrun_mos2_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 01:31:20 2012] Spatial fit model total counts = 8257.080000, observed total counts = 8272.000000
[Mon May 28 01:31:20 2012] Offset between fit and detection position for source 1 = 0.043550 pixels
[Mon May 28 01:31:20 2012] 8317.030000 total counts/ 1682.440000 bgd. counts: snr = 161.750003
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.043550 pixels
  Position = (172.6, 269.3) = 0 15 28.79 -39 13 19.4
  Extent = 6.4 (6.3-6.6)", rotation angle = 0
  Source counts = 6634.6 +/- 91.2
  Background counts = 1682.4
  Rate = 0.2 +/- 0.003
[Mon May 28 01:31:20 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:20 2012] Assessing source extent using major axis lower bound
[Mon May 28 01:31:20 2012] Source does appear to be extended
[Mon May 28 01:31:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 03:01:21 2012] Counts = 6634.590000, rescaling region sizes by 2.000000
[Mon May 28 03:01:21 2012] XMMSAS src. selection expression = ellipse(14970.414400, 23383.134600, 770.286022, 770.286022, 0.000000, X, Y)
[Mon May 28 03:01:21 2012] Writing source region out to fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 03:01:21 2012] Extracting stamp from image fullrun_mos2_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (128, 225) - (217, 314)
[Mon May 28 03:01:21 2012] XMMSAS bgd. selection expression = annulus(14970.414400, 23383.134600, 2567.620074, 5135.240148, X, Y) && !ellipse(13697.832184, 22065.943000, 622.520018, 260.795208, 257.960000, X, Y) && !ellipse(15183.369888, 24632.437286, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 03:01:21 2012] Writing fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 03:01:24 2012] Mean detx,y = (7344.50, -11022.96) 
[Mon May 28 03:01:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:01:59 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:01:59 2012] Setting source spectrum file to fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:01:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 03:39:20 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:20 2012] Error reading totcts from fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:39:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:20 2012] Using photon index=1.80, rate=0.215, arf fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 03:39:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:20 2012] Updating source flux to 4.5e-12
[Mon May 28 03:40:55 2012] Reading fit data from xmm0028740101/analysis//spectral/fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 03:40:55 2012] Spectral fit parameter nH value = 3.80678e+21
[Mon May 28 03:40:55 2012] Spectral fit parameter PhoIndex value = 3.08249
[Mon May 28 03:40:55 2012] Failed to get F(0.3-8.0) from xmm0028740101/analysis//spectral/fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 03:40:55 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:40:55 2012] Using Nh = 3.8e+21, photon index=3.08, rate=0.215, arf fullrun_mos2_xmm0028740101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 03:40:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:40:55 2012] Updating source flux to 3.7e-12