[Sun May 27 20:41:02 2012] Detection parameters:
  Position = (279.8, 142.1) = 0 14 48.68 -39 22 33.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.9 +/- 11.4
  Background counts = 7.9
  Rate = 0.003 +/- 0.0004

[Sun May 27 20:41:02 2012] Off-axis axis estimate = 11.42'
[Sun May 27 21:48:35 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:48:35 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Sun May 27 21:48:35 2012] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.762
[Sun May 27 21:48:35 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.14"
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20.csv
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20.csv
[Sun May 27 22:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20.csv
[Sun May 27 22:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:32:38 2012] Spatial fit model total counts = 167.227000, observed total counts = 147.000000
[Sun May 27 23:32:38 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 23:32:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:38 2012] Assessing source extent using major
[Sun May 27 23:32:38 2012] Source does appear to be extended
[Sun May 27 23:32:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:24:52 2012] Using EEF radius (= 12.14 ")to estimate initial spatial extent for simple fitting
[Mon May 28 00:24:52 2012] Initial guess for spatial extent in simple fitting = 12.14"
[Mon May 28 00:24:52 2012] source mask rpix=2.8, npix_max = 43, mask sum = 33, frac = 0.762
[Mon May 28 00:24:52 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 12.14"
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20.csv
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20.csv
[Mon May 28 00:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Mon May 28 00:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 01:31:17 2012] Spatial fit model total counts = 167.201000, observed total counts = 147.000000
[Mon May 28 01:31:17 2012] Poor agreement between spatial fit and data for source 38
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May 28 01:31:17 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:17 2012] Assessing source extent using major
[Mon May 28 01:31:17 2012] Source does appear to be extended
[Mon May 28 01:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:29:34 2012] XMMSAS src. selection expression = ellipse(24295.378662, 12310.583054, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing source region out to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38_src.reg
[Mon May 28 02:29:34 2012] Extracting stamp from image fullrun_mos1_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (242, 105) - (317, 180)
[Mon May 28 02:29:34 2012] XMMSAS bgd. selection expression = annulus(24295.378662, 12310.583054, 1087.500000, 2175.000000, X, Y) && !ellipse(22044.154400, 12730.834200, 493.757614, 493.757614, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38.gif
[Mon May 28 02:33:20 2012] Mean detx,y = (-12393.87, 6833.76) 
[Mon May 28 02:33:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:33:34 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:33:34 2012] Setting source spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 02:33:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 28 03:00:19 2012] Not generating rmf since there are only 80 counts
[Mon May 28 03:00:19 2012] rmf not generated due to insufficient counts
[Mon May 28 03:39:20 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:20 2012] Error reading totcts from fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 03:39:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:20 2012] Using photon index=1.80, rate=0.00262, arf fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src38.arf
[Mon May 28 03:39:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:20 2012] Updating source flux to 6.2e-14
[Mon May 28 03:39:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting