[Sun May 27 20:41:02 2012] Detection parameters:
  Position = (248.2, 283.8) = 0 15 0.51 -39 12 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.0 +/- 9.5
  Background counts = 12.2
  Rate = 0.002 +/- 0.0004

[Sun May 27 20:41:02 2012] Off-axis axis estimate = 3.80'
[Sun May 27 21:48:35 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:48:35 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Sun May 27 21:48:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.987
[Sun May 27 21:48:35 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 8.33"
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27.csv
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27.csv
[Sun May 27 22:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May 27 22:38:24 2012] Fit fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Sun May 27 23:32:38 2012] Warning, spatial fit 27 centroid is now closest to src. 3
[Sun May 27 23:32:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:38 2012] Assessing source extent using major
[Sun May 27 23:32:38 2012] Source does appear to be extended
[Sun May 27 23:32:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:24:52 2012] Using EEF radius (= 8.33 ")to estimate initial spatial extent for simple fitting
[Mon May 28 00:24:52 2012] Initial guess for spatial extent in simple fitting = 8.33"
[Mon May 28 00:24:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 23, frac = 0.987
[Mon May 28 00:24:52 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 8.33"
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25.csv
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25.csv
[Mon May 28 00:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon May 28 00:58:06 2012] Fit fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon May 28 01:31:17 2012] Source 26 is offset by 7.826831 and -4.980331 pixels which is larger than
2 X fitted extent = 1.936207 x 1.936207, not incorporating fit results
[Mon May 28 01:31:17 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:17 2012] Assessing source extent using major
[Mon May 28 01:31:17 2012] Source does appear to be extended
[Mon May 28 01:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:29:34 2012] XMMSAS src. selection expression = ellipse(21542.332321, 24643.259186, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing source region out to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26_src.reg
[Mon May 28 02:29:34 2012] Extracting stamp from image fullrun_mos1_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (211, 246) - (286, 321)
[Mon May 28 02:29:34 2012] XMMSAS bgd. selection expression = annulus(21542.332321, 24643.259186, 1087.500000, 2175.000000, X, Y) && !ellipse(23530.452312, 26468.088000, 461.988013, 403.235212, 87.028791, X, Y) && !ellipse(22361.774400, 25386.778600, 435.886413, 362.152810, 90.000000, X, Y) && !ellipse(20742.282680, 25098.568200, 286.084008, 286.084008, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26.gif
[Mon May 28 02:34:13 2012] Mean detx,y = (-5332.44, -3628.44) 
[Mon May 28 02:34:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:34:32 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:34:32 2012] Setting source spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon May 28 02:34:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon May 28 03:00:45 2012] Not generating rmf since there are only 40 counts
[Mon May 28 03:00:45 2012] rmf not generated due to insufficient counts
[Mon May 28 03:39:20 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:20 2012] Error reading totcts from fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon May 28 03:39:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:20 2012] Using photon index=1.80, rate=0.00182, arf fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src26.arf
[Mon May 28 03:39:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:20 2012] Updating source flux to 2.4e-14
[Mon May 28 03:39:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting