[Sun May 27 20:41:02 2012] Detection parameters:
  Position = (172.2, 269.2) = 0 15 28.94 -39 13 18.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7823.5 +/- 104.4
  Background counts = 11.1
  Rate = 0.3 +/- 0.003

[Sun May 27 20:41:02 2012] Off-axis axis estimate = 9.39'
[Sun May 27 21:48:35 2012] Using EEF radius (= 11.12 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:48:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:48:35 2012] Initial guess for spatial extent in simple fitting = 11.12"
[Sun May 27 21:48:35 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.963
[Sun May 27 21:48:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.12"
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 22:38:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1.csv
[Sun May 27 22:38:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 22:38:24 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 22:38:24 2012] Fit fullrun_mos1_xmm0028740101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 23:32:38 2012] Spatial fit model total counts = 7721.650000, observed total counts = 7528.000000
[Sun May 27 23:32:38 2012] Offset between fit and detection position for source 1 = 0.348607 pixels
[Sun May 27 23:32:38 2012] 7771.390000 total counts/ 1684.020000 bgd. counts: snr = 148.339249
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.348607 pixels
  Position = (172.4, 269.5) = 0 15 28.87 -39 13 18.7
  Extent = 6.9 (6.8-7.1)", rotation angle = 0
  Source counts = 6087.4 +/- 88.2
  Background counts = 1684.0
  Rate = 0.2 +/- 0.003
[Sun May 27 23:32:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:32:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:32:38 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:32:38 2012] Source does appear to be extended
[Sun May 27 23:32:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 00:24:52 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 28 00:24:52 2012] Initial guess for spatial extent in simple fitting = 6.93"
[Mon May 28 00:24:52 2012] source mask rpix=1.6, npix_max = 17, mask sum = 25, frac = 1.427
[Mon May 28 00:24:52 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.93"
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 28 00:58:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1.csv
[Mon May 28 00:58:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 28 00:58:06 2012] fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 28 00:58:06 2012] Fit fullrun_mos1_xmm0028740101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 28 01:31:17 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon May 28 01:31:17 2012] Vigneting correction estimate = 1.000000
[Mon May 28 01:31:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 28 01:31:17 2012] Assessing source extent using major axis lower bound
[Mon May 28 01:31:17 2012] Source does appear to be extended
[Mon May 28 01:31:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:29:34 2012] Counts = 6087.370000, rescaling region sizes by 2.000000
[Mon May 28 02:29:34 2012] XMMSAS src. selection expression = ellipse(14952.227460, 23396.914718, 831.330024, 831.330024, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing source region out to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 02:29:34 2012] Extracting stamp from image fullrun_mos1_xmm0028740101_pi300-10000_cl_sm2.00.img.gz, (125, 222) - (220, 317)
[Mon May 28 02:29:34 2012] XMMSAS bgd. selection expression = annulus(14952.227460, 23396.914718, 2771.100080, 5542.200159, X, Y) && !ellipse(13687.128128, 22054.089218, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20742.282680, 25098.568200, 286.084008, 286.084008, 0.000000, X, Y) && !ellipse(17098.870200, 28183.937200, 635.819782, 635.819782, 0.000000, X, Y) && !ellipse(15249.798721, 22081.886047, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 28 02:29:34 2012] Writing fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1.gif
[Mon May 28 02:29:36 2012] Mean detx,y = (-10772.08, -7582.44) 
[Mon May 28 02:29:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 02:30:18 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 02:30:18 2012] Setting source spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 02:30:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 03:39:19 2012] Updating aperture counts using extracted products
[Mon May 28 03:39:19 2012] Error reading totcts from fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:39:20 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:39:20 2012] Using photon index=1.80, rate=0.197, arf fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 03:39:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:39:20 2012] Updating source flux to 4.3e-12
[Mon May 28 03:40:05 2012] Reading fit data from xmm0028740101/analysis//spectral/fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 03:40:05 2012] Spectral fit parameter nH value = 3.89183e+21
[Mon May 28 03:40:05 2012] Spectral fit parameter PhoIndex value = 3.09008
[Mon May 28 03:40:05 2012] Failed to get F(0.3-8.0) from xmm0028740101/analysis//spectral/fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 03:40:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 03:40:05 2012] Using Nh = 3.9e+21, photon index=3.09, rate=0.197, arf fullrun_mos1_xmm0028740101_pi300-10000_pass1_cl_src1.arf
[Mon May 28 03:40:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 03:40:05 2012] Updating source flux to 3.5e-12