[Tue May 22 10:23:12 2012] Detection parameters:
  Position = (312.3, 377.7) = 7 38 58.88 70 30 20.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 80.5 +/- 14.0
  Background counts = 47.0
  Rate = 0.01 +/- 0.002

[Tue May 22 10:23:12 2012] Off-axis axis estimate = 5.84'
[Tue May 22 10:26:24 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:26:24 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue May 22 10:26:24 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.891
[Tue May 22 10:26:24 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.35"
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 22 11:05:22 2012] Fit fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 22 11:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 22 11:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3.csv
[Tue May 22 11:05:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 11:57:44 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 15.473213 pixels away
[Tue May 22 11:57:44 2012] Vigneting correction estimate = 1.000000
[Tue May 22 11:57:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 11:57:44 2012] Assessing source extent using major
[Tue May 22 11:57:44 2012] Source does appear to be extended
[Tue May 22 11:57:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 11:58:02 2012] Using EEF radius (= 9.35 ")to estimate initial spatial extent for simple fitting
[Tue May 22 11:58:02 2012] Initial guess for spatial extent in simple fitting = 9.35"
[Tue May 22 11:58:02 2012] source mask rpix=2.1, npix_max = 28, mask sum = 25, frac = 0.891
[Tue May 22 11:58:02 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.35"
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3.csv
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3.csv
[Tue May 22 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 22 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:27:21 2012] Spatial fit model total counts = 223.026000, observed total counts = 190.000000
[Tue May 22 13:27:21 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 22 13:27:21 2012] Vigneting correction estimate = 1.000000
[Tue May 22 13:27:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 13:27:21 2012] Assessing source extent using major
[Tue May 22 13:27:21 2012] Source does appear to be extended
[Tue May 22 13:27:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 13:27:39 2012] XMMSAS src. selection expression = ellipse(27125.151367, 32813.142761, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 13:27:39 2012] Writing source region out to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3_src.reg
[Tue May 22 13:27:39 2012] Extracting stamp from image fullrun_pn_xmm0028540801_pi300-10000_cl_sm2.00.img.gz, (275, 340) - (350, 415)
[Tue May 22 13:27:39 2012] XMMSAS bgd. selection expression = annulus(27125.151367, 32813.142761, 1087.500000, 2175.000000, X, Y) && !ellipse(25641.236908, 34392.855988, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 13:27:39 2012] Writing fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3.gif
[Tue May 22 13:29:25 2012] Mean detx,y = (-1556.57, 8437.95) 
[Tue May 22 13:29:29 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 13:30:06 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 13:30:07 2012] Setting source spectrum file to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 13:30:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue May 22 13:42:58 2012] Not generating rmf since there are only 80 counts
[Tue May 22 13:42:58 2012] rmf not generated due to insufficient counts
[Tue May 22 14:02:14 2012] Updating aperture counts using extracted products
[Tue May 22 14:02:14 2012] Error reading totcts from fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue May 22 14:02:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 14:02:15 2012] Using photon index=1.80, rate=0.0101, arf fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3.arf
[Tue May 22 14:02:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 14:02:16 2012] Updating source flux to 3.9e-14
[Tue May 22 14:02:23 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 22 14:02:24 2012] xmm0028540801/analysis//spectral/fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete