[Tue May 22 10:23:12 2012] Detection parameters:
  Position = (145.5, 164.1) = 7 41 22.22 70 14 47.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.5 +/- 16.5
  Background counts = 34.4
  Rate = 0.009 +/- 0.001

[Tue May 22 10:23:12 2012] Off-axis axis estimate = 14.76'
[Tue May 22 10:26:24 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Tue May 22 10:26:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 10:26:24 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Tue May 22 10:26:24 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.037
[Tue May 22 10:26:24 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 13.81"
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src17.ximg exists
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src17_1.ximg exists
[Tue May 22 11:05:22 2012] Fit fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_src17 appears to have run properly
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Tue May 22 11:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue May 22 11:05:22 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Tue May 22 11:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17.csv
[Tue May 22 11:05:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 11:57:44 2012] Warning: source 17 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 16.242967 pixels away
[Tue May 22 11:57:44 2012] Vigneting correction estimate = 1.000000
[Tue May 22 11:57:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 11:57:44 2012] Assessing source extent using major
[Tue May 22 11:57:44 2012] Source does appear to be extended
[Tue May 22 11:57:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 11:58:02 2012] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Tue May 22 11:58:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 22 11:58:02 2012] Initial guess for spatial extent in simple fitting = 13.81"
[Tue May 22 11:58:02 2012] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.037
[Tue May 22 11:58:02 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 13.81"
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src17.ximg exists
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src17_1.ximg exists
[Tue May 22 12:37:53 2012] Fit fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_src17 appears to have run properly
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May 22 12:37:53 2012] fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Tue May 22 12:37:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17.csv
[Tue May 22 12:37:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:27:21 2012] Spatial fit model total counts = 296.694000, observed total counts = 294.000000
[Tue May 22 13:27:21 2012] Offset between fit and detection position for source 17 = 1.687797 pixels
[Tue May 22 13:27:21 2012] 298.236800 total counts/ 208.971000 bgd. counts: snr = 6.175073
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.687797 pixels
  Position = (146.7, 163.0) = 7 41 21.12 70 14 41.2
  Extent = 18.6 (14.7-25.0)", rotation angle = 51 (47-55) degrees
  Source counts = 89.3 +/- 17.3
  Background counts = 209.0
  Rate = 0.009 +/- 0.002
[Tue May 22 13:27:21 2012] Vigneting correction estimate = 1.000000
[Tue May 22 13:27:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 13:27:21 2012] Assessing source extent using major axis lower bound
[Tue May 22 13:27:21 2012] Source does appear to be extended
[Tue May 22 13:27:21 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.61
[Tue May 22 13:27:21 2012] Source is asymmetric
[Tue May 22 13:27:39 2012] XMMSAS src. selection expression = ellipse(12718.007000, 14130.186800, 1113.672032, 199.614006, 50.624399, X, Y)
[Tue May 22 13:27:39 2012] Writing source region out to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17_src.reg
[Tue May 22 13:27:39 2012] Extracting stamp from image fullrun_pn_xmm0028540801_pi300-10000_cl_sm2.00.img.gz, (83, 99) - (211, 227)
[Tue May 22 13:27:39 2012] XMMSAS bgd. selection expression = annulus(12718.007000, 14130.186800, 1856.120053, 3712.240107, X, Y)
[Tue May 22 13:27:39 2012] Writing fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17.gif
[Tue May 22 13:40:24 2012] Mean detx,y = (11037.62, -11470.66) 
[Tue May 22 13:40:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 13:41:23 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 13:41:26 2012] Setting source spectrum file to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 22 13:41:26 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Tue May 22 13:46:59 2012] Not generating rmf since there are only 89 counts
[Tue May 22 13:46:59 2012] rmf not generated due to insufficient counts
[Tue May 22 14:02:15 2012] Updating aperture counts using extracted products
[Tue May 22 14:02:15 2012] Error reading totcts from fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Tue May 22 14:02:16 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 14:02:16 2012] Using photon index=1.80, rate=0.00918, arf fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17.arf
[Tue May 22 14:02:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 14:02:16 2012] Updating source flux to 7.1e-14
[Tue May 22 14:02:23 2012] Source 17 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 14:02:24 2012] xmm0028540801/analysis//spectral/fullrun_pn_xmm0028540801_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete