[Tue May 22 10:24:19 2012] Detection parameters:
  Position = (203.6, 268.7) = 7 40 32.88 70 22 22.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 134.5 +/- 14.8
  Background counts = 22.6
  Rate = 0.01 +/- 0.001

[Tue May 22 10:24:19 2012] Off-axis axis estimate = 7.21'
[Tue May 22 11:37:00 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Tue May 22 11:37:00 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Tue May 22 11:37:00 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.571
[Tue May 22 11:37:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.03"
[Tue May 22 11:57:37 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_src2.ximg exists
[Tue May 22 11:57:37 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue May 22 11:57:37 2012] Fit fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_src2 appears to have run properly
[Tue May 22 11:57:37 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue May 22 11:57:37 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue May 22 11:57:37 2012] Fit fullrun_mos2_xmm0028540801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue May 22 11:57:51 2012] Spatial fit model total counts = 225.613000, observed total counts = 216.000000
[Tue May 22 11:57:51 2012] Offset between fit and detection position for source 2 = 0.364970 pixels
[Tue May 22 11:57:51 2012] 225.715100 total counts/ 145.741000 bgd. counts: snr = 6.624582
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.364970 pixels
  Position = (203.5, 268.3) = 7 40 32.97 70 22 21.1
  Extent = 5.8 (4.6-8.0)", rotation angle = 88 (75-97) degrees
  Source counts = 80.0 +/- 15.0
  Background counts = 145.7
  Rate = 0.005 +/- 0.0009
[Tue May 22 11:57:51 2012] Vigneting correction estimate = 1.000000
[Tue May 22 11:57:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 11:57:51 2012] Assessing source extent using major axis lower bound
[Tue May 22 11:57:51 2012] Source does appear to be extended
[Tue May 22 11:57:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.55
[Tue May 22 11:57:51 2012] Source is asymmetric
[Tue May 22 13:04:23 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 22 13:04:23 2012] Initial guess for spatial extent in simple fitting = 4.17"
[Tue May 22 13:04:23 2012] source mask rpix=1.0, npix_max = 8, mask sum = 6, frac = 0.706
[Tue May 22 13:04:23 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.17"
[Tue May 22 13:27:14 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2.ximg exists
[Tue May 22 13:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2.csv
[Tue May 22 13:27:14 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue May 22 13:27:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2.csv
[Tue May 22 13:27:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:27:15 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue May 22 13:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 22 13:27:15 2012] fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue May 22 13:27:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2.csv
[Tue May 22 13:27:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540801_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 13:27:28 2012] Source 2 is offset by 0.655283 and -0.149970 pixels which is larger than
2 X fitted extent = 0.563890 x 2.742285, not incorporating fit results
[Tue May 22 13:27:28 2012] Vigneting correction estimate = 1.000000
[Tue May 22 13:27:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 13:27:28 2012] Assessing source extent using major axis lower bound
[Tue May 22 13:27:28 2012] Source does appear to be extended
[Tue May 22 13:27:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.55
[Tue May 22 13:27:28 2012] Source is asymmetric
[Tue May 22 13:56:04 2012] XMMSAS src. selection expression = ellipse(17652.792800, 23293.526400, 349.465210, 150.499204, 87.794407, X, Y)
[Tue May 22 13:56:04 2012] Writing source region out to fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2_src.reg
[Tue May 22 13:56:04 2012] Extracting stamp from image fullrun_mos2_xmm0028540801_pi300-10000_cl_sm2.00.img.gz, (183, 248) - (224, 288)
[Tue May 22 13:56:04 2012] XMMSAS bgd. selection expression = annulus(17652.792800, 23293.526400, 582.442017, 1164.884034, X, Y)
[Tue May 22 13:56:04 2012] Writing fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2.gif
[Tue May 22 13:56:28 2012] Mean detx,y = (-6776.11, 1812.00) 
[Tue May 22 13:56:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 13:56:54 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 13:56:54 2012] Setting source spectrum file to fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 13:56:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue May 22 14:00:49 2012] Not generating rmf since there are only 79 counts
[Tue May 22 14:00:49 2012] rmf not generated due to insufficient counts
[Tue May 22 14:02:18 2012] Updating aperture counts using extracted products
[Tue May 22 14:02:18 2012] Error reading totcts from fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue May 22 14:02:18 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 14:02:18 2012] Using photon index=1.80, rate=0.00498, arf fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2.arf
[Tue May 22 14:02:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 14:02:18 2012] Updating source flux to 1.2e-13
[Tue May 22 14:02:22 2012] Flag b found in src. 2 procflags, skipping spectral fitting
[Tue May 22 14:02:22 2012] Source 2 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 22 14:02:23 2012] xmm0028540801/analysis//spectral/fullrun_mos2_xmm0028540801_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete