[Sat Sep  1 01:23:50 2012] Detection parameters:
  Position = (162.5, 205.9) = 7 41 21.35 70 14 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 63.4 +/- 10.9
  Background counts = 10.9
  Rate = 0.002 +/- 0.0003

[Sat Sep  1 01:23:50 2012] Off-axis axis estimate = 11.92'
[Sat Sep  1 02:29:41 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 02:29:41 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sat Sep  1 02:29:41 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.937
[Sat Sep  1 02:29:41 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 12.39"
[Sat Sep  1 03:11:05 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25.ximg exists
[Sat Sep  1 03:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25.csv
[Sat Sep  1 03:11:05 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Sep  1 03:11:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25.csv
[Sat Sep  1 03:11:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 03:11:05 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Sep  1 03:11:05 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Sep  1 03:11:05 2012] Fit fullrun_mos2_xmm0028540601_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Sep  1 03:11:21 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 38 at 15.722208 pixels away
[Sat Sep  1 03:11:21 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 03:11:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 03:11:21 2012] Assessing source extent using major
[Sat Sep  1 03:11:21 2012] Source does appear to be extended
[Sat Sep  1 03:11:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 04:20:35 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sat Sep  1 04:20:35 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sat Sep  1 04:20:35 2012] source mask rpix=2.8, npix_max = 44, mask sum = 42, frac = 0.937
[Sat Sep  1 04:20:35 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 12.39"
[Sat Sep  1 04:55:23 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23.ximg exists
[Sat Sep  1 04:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23.csv
[Sat Sep  1 04:55:23 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23_1.ximg exists
[Sat Sep  1 04:55:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23.csv
[Sat Sep  1 04:55:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 04:55:23 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sat Sep  1 04:55:23 2012] fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sat Sep  1 04:55:23 2012] Fit fullrun_mos2_xmm0028540601_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sat Sep  1 04:55:37 2012] Spatial fit model total counts = 205.995000, observed total counts = 206.000000
[Sat Sep  1 04:55:37 2012] Offset between fit and detection position for source 38 = 1.852338 pixels
[Sat Sep  1 04:55:37 2012] 210.345600 total counts/ 134.476000 bgd. counts: snr = 6.542525
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 1.852338 pixels
  Position = (163.1, 204.1) = 7 41 20.88 70 14 33.8
  Extent = 10.5 (8.1-14.5)", rotation angle = 0
  Source counts = 75.9 +/- 14.5
  Background counts = 134.5
  Rate = 0.002 +/- 0.0004
[Sat Sep  1 04:55:37 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 04:55:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 04:55:37 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 04:55:37 2012] Source does appear to be extended
[Sat Sep  1 04:55:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 05:15:39 2012] XMMSAS src. selection expression = ellipse(14138.556800, 17706.582000, 631.170018, 631.170018, 0.000000, X, Y)
[Sat Sep  1 05:15:39 2012] Writing source region out to fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38_src.reg
[Sat Sep  1 05:15:39 2012] Extracting stamp from image fullrun_mos2_xmm0028540601_pi300-10000_cl_sm2.00.img.gz, (127, 168) - (199, 240)
[Sat Sep  1 05:15:39 2012] XMMSAS bgd. selection expression = annulus(14138.556800, 17706.582000, 1051.950030, 2103.900061, X, Y) && !ellipse(12138.657160, 19381.197200, 400.137612, 400.137612, 0.000000, X, Y)
[Sat Sep  1 05:15:39 2012] Writing fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38.gif
[Sat Sep  1 05:19:15 2012] Mean detx,y = (15499.56, -2699.49) 
[Sat Sep  1 05:19:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 05:19:25 2012] grppha failed
[Sat Sep  1 05:19:25 2012] Setting source spectrum file to fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38_src.pi.gz
[Sat Sep  1 05:19:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Sat Sep  1 05:22:18 2012] Not generating rmf since there are only 75 counts
[Sat Sep  1 05:22:18 2012] rmf not generated due to insufficient counts
[Sat Sep  1 05:22:48 2012] Updating aperture counts using extracted products
[Sat Sep  1 05:22:48 2012] Error reading totcts from fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38_src.pi.gz
[Sat Sep  1 05:22:48 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 05:22:50 2012] Source 38 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Sep  1 05:22:51 2012] xmm0028540601/analysis//spectral/fullrun_mos2_xmm0028540601_pi300-10000_pass1_cl_src38_pl.csv not found, spectral fit skipped or did not complete