[Sat May 26 10:51:27 2012] Detection parameters:
  Position = (284.9, 251.2) = 15 34 56.82 55 32 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.3 +/- 12.7
  Background counts = 37.0
  Rate = 0.004 +/- 0.0009

[Sat May 26 10:51:27 2012] Off-axis axis estimate = 3.56'
[Sat May 26 10:55:19 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sat May 26 10:55:19 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Sat May 26 10:55:19 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Sat May 26 10:55:19 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.21"
[Sat May 26 12:23:22 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23.ximg exists
[Sat May 26 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23.csv
[Sat May 26 12:23:22 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23_1.ximg exists
[Sat May 26 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23.csv
[Sat May 26 12:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:23:23 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sat May 26 12:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat May 26 12:23:23 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sat May 26 12:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23.csv
[Sat May 26 12:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:28:18 2012] Source 23 is offset by 3.215479 and -3.324860 pixels which is larger than
2 X fitted extent = 0.915913 x 0.915913, not incorporating fit results
[Sat May 26 12:28:18 2012] Warning, spatial fit 23 centroid is now closest to src. 22
[Sat May 26 12:28:18 2012] Vigneting correction estimate = 1.000000
[Sat May 26 12:28:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 12:28:18 2012] Assessing source extent using major
[Sat May 26 12:28:18 2012] Source does appear to be extended
[Sat May 26 12:28:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 12:28:18 2012] Source is confused with source 25
[Sat May 26 12:28:25 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:28:25 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Sat May 26 12:28:25 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Sat May 26 12:28:25 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.21"
[Sat May 26 13:35:34 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20.ximg exists
[Sat May 26 13:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20.csv
[Sat May 26 13:35:34 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20_1.ximg exists
[Sat May 26 13:35:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20.csv
[Sat May 26 13:35:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 13:35:35 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sat May 26 13:35:35 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sat May 26 13:35:35 2012] Fit fullrun_pn_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sat May 26 13:39:32 2012] Source 23 is offset by -5.225762 and -8.327664 pixels which is larger than
2 X fitted extent = 4.044639 x 4.044639, not incorporating fit results
[Sat May 26 13:39:32 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:39:32 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:39:32 2012] Assessing source extent using major
[Sat May 26 13:39:32 2012] Source does appear to be extended
[Sat May 26 13:39:32 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:39:39 2012] XMMSAS src. selection expression = ellipse(24740.568665, 21807.697189, 652.500000, 652.500000, 0.000000, X, Y)
[Sat May 26 13:39:39 2012] Writing source region out to fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23_src.reg
[Sat May 26 13:39:39 2012] Extracting stamp from image fullrun_pn_xmm0028540301_pi300-10000_cl_sm2.00.img.gz, (247, 214) - (322, 289)
[Sat May 26 13:39:39 2012] XMMSAS bgd. selection expression = annulus(24740.568665, 21807.697189, 1087.500000, 2175.000000, X, Y) && !ellipse(24412.372528, 23302.814545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25086.680939, 20296.981537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27039.640839, 24104.213898, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24440.994000, 24242.888000, 1202.200035, 689.723220, 355.023000, X, Y) && !ellipse(24226.990417, 23932.614044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25335.377533, 23807.880768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25671.087402, 21606.909271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25205.740000, 21517.614400, 1256.912036, 1256.912036, 0.000000, X, Y) && !ellipse(24584.644104, 20966.338318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25681.450000, 20392.147600, 1725.040050, 1725.040050, 0.000000, X, Y)
[Sat May 26 13:39:39 2012] Writing fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23.gif
[Sat May 26 13:49:46 2012] Mean detx,y = (-4953.73, -360.98) 
[Sat May 26 13:49:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 13:49:59 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 13:49:59 2012] Setting source spectrum file to fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat May 26 13:49:59 2012] Setting bgd. spectrum file to fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat May 26 13:56:26 2012] Not generating rmf since there are only 55 counts
[Sat May 26 13:56:26 2012] rmf not generated due to insufficient counts
[Sat May 26 14:03:11 2012] Updating aperture counts using extracted products
[Sat May 26 14:03:11 2012] Error reading totcts from fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Sat May 26 14:03:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 14:03:12 2012] Using photon index=1.80, rate=0.00406, arf fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23.arf
[Sat May 26 14:03:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 14:03:12 2012] Updating source flux to 1.3e-14
[Sat May 26 14:03:21 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat May 26 14:03:22 2012] xmm0028540301/analysis//spectral/fullrun_pn_xmm0028540301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete