[Sat May 26 10:51:27 2012] Detection parameters:
  Position = (288.4, 257.2) = 15 34 55.02 55 33 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.7 +/- 13.2
  Background counts = 38.9
  Rate = 0.004 +/- 0.0009

[Sat May 26 10:51:27 2012] Off-axis axis estimate = 3.08'
[Sat May 26 10:55:19 2012] Using EEF radius (= 7.97 ")to estimate initial spatial extent for simple fitting
[Sat May 26 10:55:19 2012] Initial guess for spatial extent in simple fitting = 7.97"
[Sat May 26 10:55:19 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.920
[Sat May 26 10:55:19 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 7.97"
[Sat May 26 12:23:22 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22.ximg exists
[Sat May 26 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22.csv
[Sat May 26 12:23:22 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22_1.ximg exists
[Sat May 26 12:23:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22.csv
[Sat May 26 12:23:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:23:23 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Sat May 26 12:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 26 12:23:23 2012] fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Sat May 26 12:23:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22.csv
[Sat May 26 12:23:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:28:18 2012] Warning, spatial fit 22 centroid is now closest to src. 23
[Sat May 26 12:28:18 2012] Spatial fit model total counts = 85.213300, observed total counts = 77.000000
[Sat May 26 12:28:18 2012] Offset between fit and detection position for source 22 = 3.029111 pixels
[Sat May 26 12:28:18 2012] Warning, changing simple spatial fit ID from 22 to 23
[Sat May 26 12:28:18 2012] 79.845030 total counts/ 70.490200 bgd. counts: snr = 1.114221
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.029111 pixels
  Position = (290.3, 259.5) = 15 34 54.08 55 33 22.1
  Extent = 9.3 (4.1-16.4)", rotation angle = 0
  Source counts = 9.4 +/- 8.9
  Background counts = 70.5
  Rate = 0.001 +/- 0.001
  Deleting source due to low Poisson probability