[Sat May 26 10:52:00 2012] Detection parameters:
  Position = (200.8, 208.8) = 15 35 39.90 55 29 40.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.2 +/- 22.3
  Background counts = 123.4
  Rate = 0.02 +/- 0.002

[Sat May 26 10:52:00 2012] Off-axis axis estimate = 9.61'
[Sat May 26 12:25:54 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Sat May 26 12:25:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 12:25:54 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Sat May 26 12:25:54 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Sat May 26 12:25:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.23"
[Sat May 26 12:28:12 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1.ximg exists
[Sat May 26 12:28:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1.csv
[Sat May 26 12:28:12 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat May 26 12:28:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1.csv
[Sat May 26 12:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:28:12 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat May 26 12:28:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 26 12:28:12 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat May 26 12:28:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat May 26 12:28:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0028540301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May 26 12:28:19 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 15.047656 pixels away
[Sat May 26 12:28:19 2012] Vigneting correction estimate = 1.000000
[Sat May 26 12:28:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 12:28:19 2012] Assessing source extent using major
[Sat May 26 12:28:19 2012] Source does appear to be extended
[Sat May 26 12:28:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:38:12 2012] Using EEF radius (= 11.23 ")to estimate initial spatial extent for simple fitting
[Sat May 26 13:38:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May 26 13:38:12 2012] Initial guess for spatial extent in simple fitting = 11.23"
[Sat May 26 13:38:12 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.947
[Sat May 26 13:38:12 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.23"
[Sat May 26 13:39:27 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_src1.ximg exists
[Sat May 26 13:39:27 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat May 26 13:39:27 2012] Fit fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat May 26 13:39:27 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat May 26 13:39:27 2012] fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat May 26 13:39:27 2012] Fit fullrun_mos2_xmm0028540301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat May 26 13:39:33 2012] Spatial fit model total counts = 986.991000, observed total counts = 987.000000
[Sat May 26 13:39:33 2012] Offset between fit and detection position for source 1 = 0.277823 pixels
[Sat May 26 13:39:33 2012] 989.154000 total counts/ 886.011000 bgd. counts: snr = 3.465135
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.277823 pixels
  Position = (201.0, 208.6) = 15 35 39.80 55 29 39.9
  Extent = 8.4 (5.6-13.4)", rotation angle = 0
  Source counts = 103.1 +/- 31.5
  Background counts = 886.0
  Rate = 0.03 +/- 0.008
[Sat May 26 13:39:33 2012] Vigneting correction estimate = 1.000000
[Sat May 26 13:39:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat May 26 13:39:33 2012] Assessing source extent using major axis lower bound
[Sat May 26 13:39:33 2012] Source does appear to be extended
[Sat May 26 13:39:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat May 26 13:58:28 2012] XMMSAS src. selection expression = ellipse(17435.512000, 18099.862800, 502.339814, 502.339814, 0.000000, X, Y)
[Sat May 26 13:58:28 2012] Writing source region out to fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_src.reg
[Sat May 26 13:58:28 2012] Extracting stamp from image fullrun_mos2_xmm0028540301_pi300-10000_cl_sm2.00.img.gz, (172, 180) - (230, 237)
[Sat May 26 13:58:28 2012] XMMSAS bgd. selection expression = annulus(17435.512000, 18099.862800, 837.233024, 1674.466048, X, Y)
[Sat May 26 13:58:28 2012] Writing fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1.gif
[Sat May 26 13:58:30 2012] Mean detx,y = (7543.53, 8002.52) 
[Sat May 26 13:58:31 2012] Setting backscal keywords in source and bgd. spectrum
[Sat May 26 13:58:38 2012] Binned source spectrum to 10 counts/bin
[Sat May 26 13:58:38 2012] Setting source spectrum file to fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 13:58:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat May 26 14:03:12 2012] Updating aperture counts using extracted products
[Sat May 26 14:03:12 2012] Error reading totcts from fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat May 26 14:03:12 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 14:03:12 2012] Using photon index=1.80, rate=0.0262, arf fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1.arf
[Sat May 26 14:03:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 14:03:12 2012] Updating source flux to 5.8e-13
[Sat May 26 14:03:21 2012] Reading fit data from xmm0028540301/analysis//spectral/fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_pl.csv
[Sat May 26 14:03:21 2012] Spectral fit parameter nH value = 1.11691e+21
[Sat May 26 14:03:21 2012] Spectral fit parameter PhoIndex value = 2.03306
[Sat May 26 14:03:21 2012] Failed to get F(0.3-8.0) from xmm0028540301/analysis//spectral/fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat May 26 14:03:21 2012] Calculating source flux in energy range 0.30-8.00
[Sat May 26 14:03:21 2012] Using Nh = 1.1e+21, photon index=2.03, rate=0.0262, arf fullrun_mos2_xmm0028540301_pi300-10000_pass1_cl_src1.arf
[Sat May 26 14:03:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat May 26 14:03:21 2012] Updating source flux to 5.9e-13