[Thu Jun  7 07:04:43 2012] Detection parameters:
  Position = (298.7, 274.0) = 11 51 1.62 -28 48 22.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8338.0 +/- 111.2
  Background counts = 175.7
  Rate = 0.2 +/- 0.003

[Thu Jun  7 07:04:43 2012] Off-axis axis estimate = 1.77'
[Thu Jun  7 07:08:15 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 07:08:15 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jun  7 07:08:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.051
[Thu Jun  7 07:08:15 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Jun  7 07:39:15 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 07:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 07:39:15 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 07:39:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 07:39:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 07:39:15 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 07:39:15 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 07:39:15 2012] Fit fullrun_pn_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 08:57:47 2012] Spatial fit model total counts = 10093.200000, observed total counts = 9935.000000
[Thu Jun  7 08:57:47 2012] Offset between fit and detection position for source 1 = 0.118156 pixels
[Thu Jun  7 08:57:47 2012] 10132.750000 total counts/ 4158.020000 bgd. counts: snr = 92.656309
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.118156 pixels
  Position = (298.6, 274.0) = 11 51 1.66 -28 48 22.7
  Extent = 9.2 (8.9-9.4)", rotation angle = 0
  Source counts = 5974.7 +/- 100.7
  Background counts = 4158.0
  Rate = 0.2 +/- 0.003
[Thu Jun  7 08:57:47 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 08:57:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 08:57:47 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 08:57:47 2012] Source does appear to be extended
[Thu Jun  7 08:57:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 08:58:05 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 08:58:05 2012] Initial guess for spatial extent in simple fitting = 9.20"
[Thu Jun  7 08:58:05 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.097
[Thu Jun  7 08:58:05 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.20"
[Thu Jun  7 09:24:33 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 09:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 09:24:33 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 09:24:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 09:24:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 09:24:34 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 09:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  7 09:24:34 2012] fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 09:24:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun  7 09:24:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:04:14 2012] Warning, spatial fit 1 centroid is now closest to src. 18
[Thu Jun  7 11:04:14 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:04:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:04:14 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 11:04:14 2012] Source does appear to be extended
[Thu Jun  7 11:04:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 11:04:44 2012] Counts = 5974.730000, rescaling region sizes by 2.000000
[Thu Jun  7 11:04:44 2012] XMMSAS src. selection expression = ellipse(25926.010600, 23792.001600, 1103.649632, 1103.649632, 0.000000, X, Y)
[Thu Jun  7 11:04:44 2012] Writing source region out to fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 11:04:44 2012] Extracting stamp from image fullrun_pn_xmm0027340101_pi300-10000_cl_sm2.00.img.gz, (235, 211) - (362, 337)
[Thu Jun  7 11:04:44 2012] XMMSAS bgd. selection expression = annulus(25926.010600, 23792.001600, 3678.832106, 7357.664212, X, Y) && !ellipse(24732.243933, 25633.337901, 457.257281, 430.358656, 0.000000, X, Y) && !ellipse(26959.535950, 28989.029724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26979.846924, 25750.852448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28302.086029, 25330.083405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23894.153290, 24230.550812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30423.098600, 23307.771600, 422.127212, 422.127212, 0.000000, X, Y) && !ellipse(26703.551300, 22808.952545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26697.789886, 20531.806931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19627.129593, 16423.908432, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 11:04:44 2012] Writing fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 11:05:17 2012] Mean detx,y = (-11.35, -329.31) 
[Thu Jun  7 11:05:28 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 11:07:33 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 11:07:34 2012] Setting source spectrum file to fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 11:07:34 2012] Setting bgd. spectrum file to fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  7 14:10:31 2012] Updating aperture counts using extracted products
[Thu Jun  7 14:10:31 2012] Error reading totcts from fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 14:10:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:10:33 2012] Using photon index=1.80, rate=0.188, arf fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 14:10:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:10:33 2012] Updating source flux to 4.3e-13
[Thu Jun  7 14:14:25 2012] Reading fit data from xmm0027340101/analysis//spectral/fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun  7 14:14:25 2012] Spectral fit parameter nH value = 1.09892e+22
[Thu Jun  7 14:14:25 2012] Spectral fit parameter PhoIndex value = 9.5
[Thu Jun  7 14:14:25 2012] Failed to get F(0.3-8.0) from xmm0027340101/analysis//spectral/fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun  7 14:14:25 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:14:25 2012] Using Nh = 1.1e+22, photon index=9.50, rate=0.188, arf fullrun_pn_xmm0027340101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 14:14:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:14:25 2012] Updating source flux to 2.5e-13