[Thu Jun  7 07:05:34 2012] Detection parameters:
  Position = (291.1, 146.6) = 11 51 4.13 -28 57 37.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.0 +/- 19.9
  Background counts = 30.4
  Rate = 0.005 +/- 0.0005

[Thu Jun  7 07:05:34 2012] Off-axis axis estimate = 11.02'
[Thu Jun  7 08:26:24 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 08:26:24 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Thu Jun  7 08:26:24 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.998
[Thu Jun  7 08:26:24 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 11.94"
[Thu Jun  7 08:57:41 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun  7 08:57:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7.csv
[Thu Jun  7 08:57:41 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun  7 08:57:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7.csv
[Thu Jun  7 08:57:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 08:57:41 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun  7 08:57:41 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun  7 08:57:41 2012] Fit fullrun_mos2_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Thu Jun  7 08:57:56 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 15.039692 pixels away
[Thu Jun  7 08:57:56 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 08:57:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 08:57:56 2012] Assessing source extent using major
[Thu Jun  7 08:57:56 2012] Source does appear to be extended
[Thu Jun  7 08:57:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 10:25:03 2012] Using EEF radius (= 11.94 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 10:25:03 2012] Initial guess for spatial extent in simple fitting = 11.94"
[Thu Jun  7 10:25:03 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.998
[Thu Jun  7 10:25:03 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 11.94"
[Thu Jun  7 11:04:03 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7.ximg exists
[Thu Jun  7 11:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7.csv
[Thu Jun  7 11:04:03 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Jun  7 11:04:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7.csv
[Thu Jun  7 11:04:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 11:04:03 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Jun  7 11:04:03 2012] fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Jun  7 11:04:03 2012] Fit fullrun_mos2_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Jun  7 11:04:29 2012] Spatial fit model total counts = 373.994000, observed total counts = 374.000000
[Thu Jun  7 11:04:29 2012] Offset between fit and detection position for source 13 = 0.234611 pixels
[Thu Jun  7 11:04:29 2012] 376.901000 total counts/ 240.748000 bgd. counts: snr = 8.774975
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.234611 pixels
  Position = (291.3, 146.6) = 11 51 4.06 -28 57 37.1
  Extent = 5.9 (4.7-7.1)", rotation angle = 0
  Source counts = 136.2 +/- 19.4
  Background counts = 240.7
  Rate = 0.003 +/- 0.0005
[Thu Jun  7 11:04:29 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:04:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:04:29 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 11:04:29 2012] Source does appear to be extended
[Thu Jun  7 11:04:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 13:34:31 2012] XMMSAS src. selection expression = ellipse(25296.540400, 12704.360800, 355.378210, 355.378210, 0.000000, X, Y)
[Thu Jun  7 13:34:31 2012] Writing source region out to fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13_src.reg
[Thu Jun  7 13:34:31 2012] Extracting stamp from image fullrun_mos2_xmm0027340101_pi300-10000_cl_sm2.00.img.gz, (271, 126) - (312, 167)
[Thu Jun  7 13:34:31 2012] XMMSAS bgd. selection expression = annulus(25296.540400, 12704.360800, 592.297017, 1184.594034, X, Y)
[Thu Jun  7 13:34:31 2012] Writing fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13.gif
[Thu Jun  7 13:40:01 2012] Mean detx,y = (-5780.92, 9611.39) 
[Thu Jun  7 13:40:03 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 13:40:18 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 13:40:18 2012] Setting source spectrum file to fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun  7 13:40:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Jun  7 14:10:39 2012] Updating aperture counts using extracted products
[Thu Jun  7 14:10:39 2012] Error reading totcts from fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Jun  7 14:10:40 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:10:40 2012] Using photon index=1.80, rate=0.00342, arf fullrun_mos2_xmm0027340101_pi300-10000_pass1_cl_src13.arf
[Thu Jun  7 14:10:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:10:40 2012] Updating source flux to 9.6e-14