[Thu Jun  7 07:05:10 2012] Detection parameters:
  Position = (183.2, 301.9) = 11 51 39.82 -28 46 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.4 +/- 14.1
  Background counts = 26.2
  Rate = 0.004 +/- 0.0006

[Thu Jun  7 07:05:10 2012] Off-axis axis estimate = 8.36'
[Thu Jun  7 07:39:16 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 07:39:16 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Thu Jun  7 07:39:16 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.811
[Thu Jun  7 07:39:16 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.61"
[Thu Jun  7 08:26:23 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9.ximg exists
[Thu Jun  7 08:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9.csv
[Thu Jun  7 08:26:23 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9_1.ximg exists
[Thu Jun  7 08:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9.csv
[Thu Jun  7 08:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 08:26:24 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Thu Jun  7 08:26:24 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Thu Jun  7 08:26:24 2012] Fit fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Thu Jun  7 08:57:52 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 14.731527 pixels away
[Thu Jun  7 08:57:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 08:57:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 08:57:52 2012] Assessing source extent using major
[Thu Jun  7 08:57:52 2012] Source does appear to be extended
[Thu Jun  7 08:57:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 09:24:34 2012] Using EEF radius (= 10.61 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 09:24:34 2012] Initial guess for spatial extent in simple fitting = 10.61"
[Thu Jun  7 09:24:34 2012] source mask rpix=2.4, npix_max = 34, mask sum = 28, frac = 0.811
[Thu Jun  7 09:24:34 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.61"
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9.ximg exists
[Thu Jun  7 10:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9.csv
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Jun  7 10:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9.csv
[Thu Jun  7 10:25:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Jun  7 10:25:02 2012] Fit fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Thu Jun  7 11:04:23 2012] Spatial fit model total counts = 259.107000, observed total counts = 260.000000
[Thu Jun  7 11:04:23 2012] Offset between fit and detection position for source 12 = 0.520984 pixels
[Thu Jun  7 11:04:23 2012] 259.798700 total counts/ 208.286000 bgd. counts: snr = 3.569310
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.520984 pixels
  Position = (183.7, 301.8) = 11 51 39.65 -28 46 21.5
  Extent = 4.5 (2.7-6.9)", rotation angle = 0
  Source counts = 51.5 +/- 16.1
  Background counts = 208.3
  Rate = 0.001 +/- 0.0004
[Thu Jun  7 11:04:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:04:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:04:23 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 11:04:23 2012] Source does appear to be extended
[Thu Jun  7 11:04:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:36:04 2012] XMMSAS src. selection expression = ellipse(15934.869800, 26208.600600, 268.412408, 268.412408, 0.000000, X, Y)
[Thu Jun  7 12:36:04 2012] Writing source region out to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12_src.reg
[Thu Jun  7 12:36:04 2012] Extracting stamp from image fullrun_mos1_xmm0027340101_pi300-10000_cl_sm2.00.img.gz, (168, 286) - (199, 317)
[Thu Jun  7 12:36:04 2012] XMMSAS bgd. selection expression = annulus(15934.869800, 26208.600600, 447.354013, 894.708026, X, Y) && !ellipse(17512.434601, 24520.007416, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 12:36:04 2012] Writing fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12.gif
[Thu Jun  7 12:42:15 2012] Mean detx,y = (-6562.24, 7182.11) 
[Thu Jun  7 12:42:17 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 12:42:38 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 12:42:38 2012] Setting source spectrum file to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun  7 12:42:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Jun  7 13:20:55 2012] Not generating rmf since there are only 51 counts
[Thu Jun  7 13:20:55 2012] rmf not generated due to insufficient counts
[Thu Jun  7 14:10:35 2012] Updating aperture counts using extracted products
[Thu Jun  7 14:10:35 2012] Error reading totcts from fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Jun  7 14:10:37 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:10:37 2012] Using photon index=1.80, rate=0.00129, arf fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src12.arf
[Thu Jun  7 14:10:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:10:37 2012] Updating source flux to 2.8e-14
[Thu Jun  7 14:10:42 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting