[Thu Jun  7 07:05:10 2012] Detection parameters:
  Position = (298.3, 274.0) = 11 51 1.76 -28 48 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2698.7 +/- 64.2
  Background counts = 45.0
  Rate = 0.06 +/- 0.002

[Thu Jun  7 07:05:10 2012] Off-axis axis estimate = 1.77'
[Thu Jun  7 07:39:16 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jun  7 07:39:16 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jun  7 07:39:16 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840
[Thu Jun  7 07:39:16 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Thu Jun  7 08:26:23 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun  7 08:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 08:26:23 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun  7 08:26:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1.csv
[Thu Jun  7 08:26:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 08:26:24 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun  7 08:26:24 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun  7 08:26:24 2012] Fit fullrun_mos1_xmm0027340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Jun  7 08:57:52 2012] Spatial fit model total counts = 3692.440000, observed total counts = 3690.000000
[Thu Jun  7 08:57:52 2012] Offset between fit and detection position for source 1 = 0.205025 pixels
[Thu Jun  7 08:57:52 2012] 3707.150000 total counts/ 1584.750000 bgd. counts: snr = 53.314686
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205025 pixels
  Position = (298.4, 273.9) = 11 51 1.71 -28 48 23.4
  Extent = 9.2 (8.8-9.7)", rotation angle = 0
  Source counts = 2122.4 +/- 60.9
  Background counts = 1584.8
  Rate = 0.05 +/- 0.002
[Thu Jun  7 08:57:52 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 08:57:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 08:57:52 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 08:57:52 2012] Source does appear to be extended
[Thu Jun  7 08:57:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 09:24:34 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun  7 09:24:34 2012] Initial guess for spatial extent in simple fitting = 9.21"
[Thu Jun  7 09:24:34 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.913
[Thu Jun  7 09:24:34 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.21"
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun  7 10:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun  7 10:25:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1.csv
[Thu Jun  7 10:25:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun  7 10:25:02 2012] fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun  7 10:25:02 2012] Fit fullrun_mos1_xmm0027340101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jun  7 11:04:23 2012] Spatial fit model total counts = 3829.600000, observed total counts = 3824.000000
[Thu Jun  7 11:04:23 2012] Offset between fit and detection position for source 1 = 0.032583 pixels
[Thu Jun  7 11:04:23 2012] 3859.110000 total counts/ 1695.980000 bgd. counts: snr = 52.525749
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.032583 pixels
  Position = (298.4, 273.8) = 11 51 1.72 -28 48 23.5
  Extent = 9.3 (8.9-9.8)", rotation angle = 0
  Source counts = 2163.1 +/- 62.1
  Background counts = 1696.0
  Rate = 0.05 +/- 0.002
[Thu Jun  7 11:04:23 2012] Vigneting correction estimate = 1.000000
[Thu Jun  7 11:04:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun  7 11:04:23 2012] Assessing source extent using major axis lower bound
[Thu Jun  7 11:04:23 2012] Source does appear to be extended
[Thu Jun  7 11:04:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun  7 12:36:03 2012] Counts = 2163.130000, rescaling region sizes by 2.000000
[Thu Jun  7 12:36:03 2012] XMMSAS src. selection expression = ellipse(25910.301200, 23775.700200, 1121.528432, 1121.528432, 0.000000, X, Y)
[Thu Jun  7 12:36:03 2012] Writing source region out to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun  7 12:36:03 2012] Extracting stamp from image fullrun_mos1_xmm0027340101_pi300-10000_cl_sm2.00.img.gz, (234, 209) - (363, 338)
[Thu Jun  7 12:36:03 2012] XMMSAS bgd. selection expression = annulus(25910.301200, 23775.700200, 3738.428108, 7476.856215, X, Y) && !ellipse(26923.678300, 28991.884600, 443.947213, 363.558410, 0.000000, X, Y) && !ellipse(24709.506600, 25618.951000, 329.991209, 329.991209, 0.000000, X, Y) && !ellipse(18766.507400, 29207.194200, 541.091216, 300.003209, 127.854200, X, Y) && !ellipse(27164.850000, 22409.254000, 1237.912036, 1237.912036, 0.000000, X, Y) && !ellipse(30417.937646, 23266.828941, 383.921404, 281.885458, 309.813208, X, Y) && !ellipse(19595.151093, 16408.266327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23808.337620, 24239.983200, 425.854412, 425.854412, 0.000000, X, Y) && !ellipse(24886.722717, 24219.734222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18955.851898, 28352.722748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23464.158020, 21374.101700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26892.894200, 25758.626000, 504.685615, 504.685615, 0.000000, X, Y) && !ellipse(26222.252899, 25090.968811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27127.240875, 23713.003296, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun  7 12:36:03 2012] Writing fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1.gif
[Thu Jun  7 12:36:11 2012] Mean detx,y = (440.70, -310.30) 
[Thu Jun  7 12:36:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jun  7 12:38:56 2012] Binned source spectrum to 10 counts/bin
[Thu Jun  7 12:38:56 2012] Setting source spectrum file to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 12:38:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun  7 14:10:35 2012] Updating aperture counts using extracted products
[Thu Jun  7 14:10:35 2012] Error reading totcts from fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun  7 14:10:36 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:10:36 2012] Using photon index=1.80, rate=0.0543, arf fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 14:10:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:10:36 2012] Updating source flux to 4.8e-13
[Thu Jun  7 14:12:28 2012] Reading fit data from xmm0027340101/analysis//spectral/fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_pl.csv
[Thu Jun  7 14:12:28 2012] Spectral fit parameter nH value = 8.37107e+21
[Thu Jun  7 14:12:28 2012] Spectral fit parameter PhoIndex value = 7.81231
[Thu Jun  7 14:12:28 2012] Failed to get F(0.3-8.0) from xmm0027340101/analysis//spectral/fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Thu Jun  7 14:12:28 2012] Calculating source flux in energy range 0.30-8.00
[Thu Jun  7 14:12:28 2012] Using Nh = 8.4e+21, photon index=7.81, rate=0.0543, arf fullrun_mos1_xmm0027340101_pi300-10000_pass1_cl_src1.arf
[Thu Jun  7 14:12:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun  7 14:12:28 2012] Updating source flux to 2.8e-13