[Tue Apr 10 22:06:14 2012] Detection parameters:
  Position = (161.7, 225.3) = 10 30 3.23 68 17 43.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 451.5 +/- 27.3
  Background counts = 25.3
  Rate = 0.02 +/- 0.001

[Tue Apr 10 22:06:15 2012] Off-axis axis estimate = 11.24'
[Tue Apr 10 22:06:35 2012] Using EEF radius (= 12.05 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:06:35 2012] Initial guess for spatial extent in simple fitting = 12.05"
[Tue Apr 10 22:06:35 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.146
[Tue Apr 10 22:06:35 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.05"
[Tue Apr 10 22:06:36 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5.ximg exists
[Tue Apr 10 22:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 22:06:36 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Apr 10 22:06:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5.csv
[Tue Apr 10 22:06:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Apr 10 22:06:37 2012] Fit fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Apr 10 22:06:45 2012] Spatial fit model total counts = 570.986000, observed total counts = 571.000000
[Tue Apr 10 22:06:45 2012] Offset between fit and detection position for source 5 = 0.353151 pixels
[Tue Apr 10 22:06:45 2012] 574.639000 total counts/ 294.741000 bgd. counts: snr = 16.303450
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.353151 pixels
  Position = (161.9, 225.6) = 10 30 3.10 68 17 43.2
  Extent = 6.5 (5.7-7.3)", rotation angle = 0
  Source counts = 279.9 +/- 24.0
  Background counts = 294.7
  Rate = 0.02 +/- 0.001
[Tue Apr 10 22:06:46 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:06:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:06:46 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:06:46 2012] Source does appear to be extended
[Tue Apr 10 22:06:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:07:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:07:00 2012] Initial guess for spatial extent in simple fitting = 6.45"
[Tue Apr 10 22:07:00 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.017
[Tue Apr 10 22:07:00 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 6.45"
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5.csv
[Tue Apr 10 22:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Apr 10 22:07:01 2012] Fit fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Apr 10 22:07:09 2012] Spatial fit model total counts = 544.734000, observed total counts = 545.000000
[Tue Apr 10 22:07:09 2012] Offset between fit and detection position for source 5 = 0.052030 pixels
[Tue Apr 10 22:07:09 2012] 538.457000 total counts/ 259.481000 bgd. counts: snr = 17.318651
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.052030 pixels
  Position = (161.9, 225.6) = 10 30 3.07 68 17 43.3
  Extent = 6.4 (5.7-7.3)", rotation angle = 0
  Source counts = 279.0 +/- 23.2
  Background counts = 259.5
  Rate = 0.02 +/- 0.001
[Tue Apr 10 22:07:09 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:07:09 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:07:09 2012] Source does appear to be extended
[Tue Apr 10 22:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:07:25 2012] XMMSAS src. selection expression = ellipse(14038.587520, 19579.324800, 386.703611, 386.703611, 0.000000, X, Y)
[Tue Apr 10 22:07:25 2012] Not overwriting source region fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src.reg
[Tue Apr 10 22:07:25 2012] Extracting stamp from image fullrun_pn_xmm0026340301_pi300-10000_cl_sm2.00.img.gz, (140, 203) - (184, 248)
[Tue Apr 10 22:07:25 2012] XMMSAS bgd. selection expression = annulus(14038.587520, 19579.324800, 644.506019, 1289.012037, X, Y)
[Tue Apr 10 22:07:25 2012] Writing fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5.gif
[Tue Apr 10 22:07:27 2012] ../../xmm0026340301/products/events/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0026340301/products/events/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Tue Apr 10 22:07:27 2012] Mean detx,y = (-13734.71, -3073.25) 
[Tue Apr 10 22:07:27 2012] ../../xmm0026340301/products/images/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src.img and ../../xmm0026340301/products/images/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Tue Apr 10 22:07:27 2012] ../../xmm0026340301/products/spectra/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0026340301/products/spectra/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Tue Apr 10 22:07:27 2012] Setting source spectrum file to fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Apr 10 22:07:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue Apr 10 22:07:27 2012] ../../xmm0026340301/products/lightcurves/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0026340301/products/lightcurves/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Tue Apr 10 22:07:30 2012] fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5.rmf exists, delete to re-create
[Tue Apr 10 22:07:30 2012] fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Tue Apr 10 22:07:51 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:07:51 2012] Error reading totcts from fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue Apr 10 22:07:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:07:52 2012] Using photon index=1.80, rate=0.0158, arf fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src5.arf
[Tue Apr 10 22:07:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 22:07:52 2012] Updating source flux to 1.3e-13