[Tue Apr 10 22:06:15 2012] Detection parameters:
  Position = (232.0, 289.3) = 10 29 8.31 68 22 23.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.9 +/- 14.8
  Background counts = 28.5
  Rate = 0.009 +/- 0.001

[Tue Apr 10 22:06:15 2012] Off-axis axis estimate = 4.86'
[Tue Apr 10 22:06:35 2012] Using EEF radius (= 8.86 ")to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:06:35 2012] Initial guess for spatial extent in simple fitting = 8.86"
[Tue Apr 10 22:06:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.165
[Tue Apr 10 22:06:35 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 8.86"
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35.ximg exists
[Tue Apr 10 22:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35_1.ximg exists
[Tue Apr 10 22:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35.csv
[Tue Apr 10 22:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Tue Apr 10 22:06:37 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Tue Apr 10 22:06:37 2012] Fit fullrun_pn_xmm0026340301_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Tue Apr 10 22:06:46 2012] Spatial fit model total counts = 247.000000, observed total counts = 247.000000
[Tue Apr 10 22:06:46 2012] Offset between fit and detection position for source 35 = 0.299468 pixels
[Tue Apr 10 22:06:46 2012] 250.107000 total counts/ 143.414000 bgd. counts: snr = 8.909230
Spatial fit parameters:
  Offset between fit and detection position for source 35 = 0.299468 pixels
  Position = (231.8, 289.5) = 10 29 8.48 68 22 22.7
  Extent = 7.5 (6.1-9.5)", rotation angle = 0
  Source counts = 106.7 +/- 15.8
  Background counts = 143.4
  Rate = 0.006 +/- 0.0009
[Tue Apr 10 22:06:46 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:06:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:06:46 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:06:46 2012] Source does appear to be extended
[Tue Apr 10 22:06:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:07:00 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Apr 10 22:07:00 2012] Initial guess for spatial extent in simple fitting = 7.54"
[Tue Apr 10 22:07:00 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.003
[Tue Apr 10 22:07:00 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 7.54"
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35.csv
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35_1.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35.csv
[Tue Apr 10 22:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue Apr 10 22:07:01 2012] fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Tue Apr 10 22:07:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35.csv
[Tue Apr 10 22:07:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0026340301_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Apr 10 22:07:09 2012] Warning, spatial fit 35 centroid is now closest to src. 36
[Tue Apr 10 22:07:09 2012] Vigneting correction estimate = 1.000000
[Tue Apr 10 22:07:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Apr 10 22:07:09 2012] Assessing source extent using major axis lower bound
[Tue Apr 10 22:07:09 2012] Source does appear to be extended
[Tue Apr 10 22:07:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Apr 10 22:07:26 2012] XMMSAS src. selection expression = ellipse(20114.653400, 25134.369000, 452.350813, 452.350813, 0.000000, X, Y)
[Tue Apr 10 22:07:26 2012] Not overwriting source region fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src.reg
[Tue Apr 10 22:07:26 2012] Extracting stamp from image fullrun_pn_xmm0026340301_pi300-10000_cl_sm2.00.img.gz, (206, 263) - (258, 315)
[Tue Apr 10 22:07:26 2012] XMMSAS bgd. selection expression = annulus(20114.653400, 25134.369000, 753.918022, 1507.836043, X, Y) && !ellipse(21959.851608, 23815.179443, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Apr 10 22:07:26 2012] Writing fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35.gif
[Tue Apr 10 22:07:28 2012] ../../xmm0026340301/products/events/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src.evt and ../../xmm0026340301/products/events/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_bgd.evt exist, delete to re-create
[Tue Apr 10 22:07:28 2012] Mean detx,y = (-5537.58, -2309.31) 
[Tue Apr 10 22:07:28 2012] ../../xmm0026340301/products/images/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src.img and ../../xmm0026340301/products/images/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_bgd.img exist, delete to re-create
[Tue Apr 10 22:07:28 2012] ../../xmm0026340301/products/spectra/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src_b10.pi.gz and ../../xmm0026340301/products/spectra/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_bgd.pi exist, delete to re-create
[Tue Apr 10 22:07:28 2012] Setting source spectrum file to fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Apr 10 22:07:28 2012] Setting bgd. spectrum file to fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Tue Apr 10 22:07:28 2012] ../../xmm0026340301/products/lightcurves/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src.lc and ../../xmm0026340301/products/lightcurves/fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_bgd.lc exist, delete to re-create
[Tue Apr 10 22:07:30 2012] fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35.rmf exists, delete to re-create
[Tue Apr 10 22:07:30 2012] fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35.arf exists, delete to re-create
[Tue Apr 10 22:07:52 2012] Updating aperture counts using extracted products
[Tue Apr 10 22:07:52 2012] Error reading totcts from fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Tue Apr 10 22:07:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Apr 10 22:07:52 2012] Using photon index=1.80, rate=0.00603, arf fullrun_pn_xmm0026340301_pi300-10000_pass1_cl_src35.arf
[Tue Apr 10 22:07:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Apr 10 22:07:52 2012] Updating source flux to 2.5e-14