[Wed Apr 11 06:05:54 2012] Detection parameters:
  Position = (298.1, 429.2) = 9 40 21.52 71 19 10.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.9 +/- 15.0
  Background counts = 7.9
  Rate = 0.009 +/- 0.001

[Wed Apr 11 06:05:55 2012] Off-axis axis estimate = 9.48'
[Wed Apr 11 06:06:14 2012] Using EEF radius (= 11.17 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Apr 11 06:06:14 2012] Initial guess for spatial extent in simple fitting = 11.17"
[Wed Apr 11 06:06:14 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.957
[Wed Apr 11 06:06:14 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.17"
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3.csv
[Wed Apr 11 06:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:15 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Apr 11 06:06:15 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:06:15 2012] Fit fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:06:27 2012] Spatial fit model total counts = 202.174000, observed total counts = 203.000000
[Wed Apr 11 06:06:27 2012] Offset between fit and detection position for source 7 = 0.132574 pixels
[Wed Apr 11 06:06:27 2012] 202.944800 total counts/ 115.881000 bgd. counts: snr = 8.087820
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.132574 pixels
  Position = (298.0, 429.3) = 9 40 21.61 71 19 9.6
  Extent = 4.3 (3.6-5.4)", rotation angle = 0
  Source counts = 87.1 +/- 14.2
  Background counts = 115.9
  Rate = 0.003 +/- 0.0005
[Wed Apr 11 06:06:27 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:27 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:27 2012] Source does appear to be extended
[Wed Apr 11 06:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:06:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:38 2012] Initial guess for spatial extent in simple fitting = 4.34"
[Wed Apr 11 06:06:38 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.004
[Wed Apr 11 06:06:38 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 4.34"
[Wed Apr 11 06:06:38 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Apr 11 06:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:06:38 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Apr 11 06:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3.csv
[Wed Apr 11 06:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:39 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Apr 11 06:06:39 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Apr 11 06:06:39 2012] Fit fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Apr 11 06:06:50 2012] Spatial fit model total counts = 202.094000, observed total counts = 203.000000
[Wed Apr 11 06:06:50 2012] Offset between fit and detection position for source 7 = 0.004682 pixels
[Wed Apr 11 06:06:50 2012] 202.837600 total counts/ 116.002000 bgd. counts: snr = 8.062414
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.004682 pixels
  Position = (298.0, 429.3) = 9 40 21.61 71 19 9.6
  Extent = 4.4 (3.6-5.4)", rotation angle = 0
  Source counts = 86.8 +/- 14.2
  Background counts = 116.0
  Rate = 0.003 +/- 0.0005
[Wed Apr 11 06:06:50 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:50 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:50 2012] Source does appear to be extended
[Wed Apr 11 06:06:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:07:06 2012] XMMSAS src. selection expression = ellipse(25878.133700, 37296.629200, 262.585808, 262.585808, 0.000000, X, Y)
[Wed Apr 11 06:07:06 2012] Not overwriting source region fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src.reg
[Wed Apr 11 06:07:06 2012] Extracting stamp from image fullrun_mos2_xmm0026340101_pi300-10000_cl_sm2.00.img.gz, (283, 414) - (313, 444)
[Wed Apr 11 06:07:06 2012] XMMSAS bgd. selection expression = annulus(25878.133700, 37296.629200, 437.643013, 875.286025, X, Y) && !ellipse(25805.013400, 38450.188800, 663.840019, 420.116012, 15.250664, X, Y)
[Wed Apr 11 06:07:06 2012] Writing fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7.gif
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/events/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src.evt and ../../xmm0026340101/products/events/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_bgd.evt exist, delete to re-create
[Wed Apr 11 06:07:07 2012] Mean detx,y = (-7964.51, 5128.35) 
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/images/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src.img and ../../xmm0026340101/products/images/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_bgd.img exist, delete to re-create
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/spectra/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src_b10.pi.gz and ../../xmm0026340101/products/spectra/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_bgd.pi exist, delete to re-create
[Wed Apr 11 06:07:07 2012] Setting source spectrum file to fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Apr 11 06:07:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/lightcurves/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src.lc and ../../xmm0026340101/products/lightcurves/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_bgd.lc exist, delete to re-create
[Wed Apr 11 06:07:08 2012] Not generating rmf since there are only 86 counts
[Wed Apr 11 06:07:08 2012] rmf not generated due to insufficient counts
[Wed Apr 11 06:07:08 2012] fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7.arf exists, delete to re-create
[Wed Apr 11 06:07:32 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:07:32 2012] Error reading totcts from fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Apr 11 06:07:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:07:32 2012] Using photon index=1.80, rate=0.00335, arf fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src7.arf
[Wed Apr 11 06:07:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:07:32 2012] Updating source flux to 8.7e-14
[Wed Apr 11 06:07:35 2012] Source 7 has fewer than 100.000000 counts, skipping spectral fitting