[Wed Apr 11 06:05:54 2012] Detection parameters:
  Position = (221.9, 338.8) = 9 41 30.14 71 12 35.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 785.2 +/- 33.8
  Background counts = 7.8
  Rate = 0.04 +/- 0.002

[Wed Apr 11 06:05:55 2012] Off-axis axis estimate = 6.27'
[Wed Apr 11 06:06:14 2012] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:14 2012] Initial guess for spatial extent in simple fitting = 9.57"
[Wed Apr 11 06:06:14 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.030
[Wed Apr 11 06:06:14 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.57"
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1.csv
[Wed Apr 11 06:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Apr 11 06:06:14 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Apr 11 06:06:15 2012] Fit fullrun_mos2_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Apr 11 06:06:27 2012] Spatial fit model total counts = 796.214000, observed total counts = 780.000000
[Wed Apr 11 06:06:27 2012] Offset between fit and detection position for source 4 = 0.232982 pixels
[Wed Apr 11 06:06:27 2012] 800.027000 total counts/ 231.563000 bgd. counts: snr = 37.356690
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.232982 pixels
  Position = (221.9, 338.6) = 9 41 30.17 71 12 34.3
  Extent = 5.6 (5.2-6.0)", rotation angle = 0
  Source counts = 568.5 +/- 28.3
  Background counts = 231.6
  Rate = 0.02 +/- 0.001
[Wed Apr 11 06:06:27 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:27 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:27 2012] Source does appear to be extended
[Wed Apr 11 06:06:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:06:38 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:38 2012] Initial guess for spatial extent in simple fitting = 5.57"
[Wed Apr 11 06:06:38 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.946
[Wed Apr 11 06:06:38 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.57"
[Wed Apr 11 06:06:38 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Apr 11 06:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 06:06:38 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Apr 11 06:06:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1.csv
[Wed Apr 11 06:06:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:39 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Apr 11 06:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Apr 11 06:06:39 2012] fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Apr 11 06:06:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Wed Apr 11 06:06:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:50 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Wed Apr 11 06:06:50 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:50 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:50 2012] Source does appear to be extended
[Wed Apr 11 06:06:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:07:06 2012] XMMSAS src. selection expression = ellipse(19252.900400, 29406.922400, 334.305610, 334.305610, 0.000000, X, Y)
[Wed Apr 11 06:07:06 2012] Not overwriting source region fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src.reg
[Wed Apr 11 06:07:06 2012] Extracting stamp from image fullrun_mos2_xmm0026340101_pi300-10000_cl_sm2.00.img.gz, (203, 319) - (241, 358)
[Wed Apr 11 06:07:06 2012] XMMSAS bgd. selection expression = annulus(19252.900400, 29406.922400, 557.176016, 1114.352032, X, Y)
[Wed Apr 11 06:07:06 2012] Writing fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4.gif
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/events/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0026340101/products/events/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Wed Apr 11 06:07:07 2012] Mean detx,y = (2316.73, 5809.37) 
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/images/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src.img and ../../xmm0026340101/products/images/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/spectra/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0026340101/products/spectra/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Wed Apr 11 06:07:07 2012] Setting source spectrum file to fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Apr 11 06:07:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Apr 11 06:07:07 2012] ../../xmm0026340101/products/lightcurves/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0026340101/products/lightcurves/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Wed Apr 11 06:07:08 2012] fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4.rmf exists, delete to re-create
[Wed Apr 11 06:07:08 2012] fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Wed Apr 11 06:07:32 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:07:32 2012] Error reading totcts from fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Apr 11 06:07:32 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:07:32 2012] Using photon index=1.80, rate=0.0219, arf fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4.arf
[Wed Apr 11 06:07:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:07:32 2012] Updating source flux to 4.1e-13
[Wed Apr 11 06:07:36 2012] Reading fit data from xmm0026340101/analysis//spectral/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_pl.csv
[Wed Apr 11 06:07:36 2012] Spectral fit parameter nH value = 2.78123e+16
[Wed Apr 11 06:07:36 2012] Spectral fit parameter PhoIndex value = 2.02827
[Wed Apr 11 06:07:36 2012] Failed to get F(0.3-8.0) from xmm0026340101/analysis//spectral/fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Wed Apr 11 06:07:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:07:36 2012] Using Nh = 2.8e+16, photon index=2.03, rate=0.0219, arf fullrun_mos2_xmm0026340101_pi300-10000_pass1_cl_src4.arf
[Wed Apr 11 06:07:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:07:36 2012] Updating source flux to 3.7e-13