[Wed Apr 11 06:05:54 2012] Detection parameters:
  Position = (182.7, 352.3) = 9 42 5.48 71 13 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 40.9 +/- 8.5
  Background counts = 7.6
  Rate = 0.003 +/- 0.0007

[Wed Apr 11 06:05:54 2012] Off-axis axis estimate = 9.25'
[Wed Apr 11 06:06:13 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:13 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Wed Apr 11 06:06:13 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.892
[Wed Apr 11 06:06:13 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.05"
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10.csv
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10.csv
[Wed Apr 11 06:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Apr 11 06:06:14 2012] Fit fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Apr 11 06:06:24 2012] Spatial fit model total counts = 93.359000, observed total counts = 89.000000
[Wed Apr 11 06:06:24 2012] Offset between fit and detection position for source 18 = 0.268231 pixels
[Wed Apr 11 06:06:24 2012] 93.590600 total counts/ 66.240000 bgd. counts: snr = 3.360522
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.268231 pixels
  Position = (182.5, 352.2) = 9 42 5.70 71 13 32.5
  Extent = 4.3 (2.9-5.7)", rotation angle = 0
  Source counts = 27.4 +/- 9.7
  Background counts = 66.2
  Rate = 0.001 +/- 0.0004
[Wed Apr 11 06:06:24 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:24 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:24 2012] Source does appear to be extended
[Wed Apr 11 06:06:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:06:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:37 2012] Initial guess for spatial extent in simple fitting = 4.28"
[Wed Apr 11 06:06:37 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.022
[Wed Apr 11 06:06:37 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 4.28"
[Wed Apr 11 06:06:37 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10.ximg exists
[Wed Apr 11 06:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10.csv
[Wed Apr 11 06:06:37 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Apr 11 06:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10.csv
[Wed Apr 11 06:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:38 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Apr 11 06:06:38 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Apr 11 06:06:38 2012] Fit fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Apr 11 06:06:48 2012] Spatial fit model total counts = 94.452400, observed total counts = 91.000000
[Wed Apr 11 06:06:48 2012] Offset between fit and detection position for source 18 = 0.006584 pixels
[Wed Apr 11 06:06:48 2012] 94.322200 total counts/ 67.212900 bgd. counts: snr = 3.306679
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.006584 pixels
  Position = (182.5, 352.2) = 9 42 5.69 71 13 32.5
  Extent = 4.2 (2.9-5.7)", rotation angle = 0
  Source counts = 27.1 +/- 9.7
  Background counts = 67.2
  Rate = 0.001 +/- 0.0004
[Wed Apr 11 06:06:48 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:48 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:48 2012] Source does appear to be extended
[Wed Apr 11 06:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:07:04 2012] XMMSAS src. selection expression = ellipse(15828.324400, 30591.816400, 254.512207, 254.512207, 0.000000, X, Y)
[Wed Apr 11 06:07:04 2012] Not overwriting source region fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src.reg
[Wed Apr 11 06:07:04 2012] Extracting stamp from image fullrun_mos1_xmm0026340101_pi300-10000_cl_sm2.00.img.gz, (168, 338) - (197, 367)
[Wed Apr 11 06:07:04 2012] XMMSAS bgd. selection expression = annulus(15828.324400, 30591.816400, 424.187012, 848.374024, X, Y)
[Wed Apr 11 06:07:04 2012] Writing fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18.gif
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/events/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0026340101/products/events/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Wed Apr 11 06:07:05 2012] Mean detx,y = (9510.91, -3510.65) 
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/images/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src.img and ../../xmm0026340101/products/images/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/spectra/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0026340101/products/spectra/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Wed Apr 11 06:07:05 2012] Setting source spectrum file to fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 06:07:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/lightcurves/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0026340101/products/lightcurves/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Wed Apr 11 06:07:06 2012] Not generating rmf since there are only 27 counts
[Wed Apr 11 06:07:06 2012] rmf not generated due to insufficient counts
[Wed Apr 11 06:07:06 2012] fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Wed Apr 11 06:07:31 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:07:31 2012] Error reading totcts from fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Wed Apr 11 06:07:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:07:31 2012] Using photon index=1.80, rate=0.00104, arf fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18.arf
[Wed Apr 11 06:07:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:07:31 2012] Updating source flux to 2.5e-14
[Wed Apr 11 06:07:34 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Apr 11 06:07:35 2012] xmm0026340101/analysis//spectral/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete