[Wed Apr 11 06:05:54 2012] Detection parameters:
  Position = (384.6, 287.0) = 9 39 3.92 71 8 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.0 +/- 13.9
  Background counts = 7.3
  Rate = 0.007 +/- 0.0008

[Wed Apr 11 06:05:54 2012] Off-axis axis estimate = 6.30'
[Wed Apr 11 06:06:13 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:13 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Wed Apr 11 06:06:13 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.027
[Wed Apr 11 06:06:13 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.58"
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4.csv
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Apr 11 06:06:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4.csv
[Wed Apr 11 06:06:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Apr 11 06:06:14 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Apr 11 06:06:14 2012] Fit fullrun_mos1_xmm0026340101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Wed Apr 11 06:06:24 2012] Spatial fit model total counts = 171.705000, observed total counts = 167.000000
[Wed Apr 11 06:06:24 2012] Offset between fit and detection position for source 10 = 0.064754 pixels
[Wed Apr 11 06:06:24 2012] 173.048200 total counts/ 81.242000 bgd. counts: snr = 10.185485
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.064754 pixels
  Position = (384.5, 286.9) = 9 39 3.95 71 8 49.4
  Extent = 5.6 (4.7-6.7)", rotation angle = 0
  Source counts = 91.8 +/- 13.2
  Background counts = 81.2
  Rate = 0.004 +/- 0.0005
[Wed Apr 11 06:06:24 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:24 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:24 2012] Source does appear to be extended
[Wed Apr 11 06:06:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:06:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Apr 11 06:06:37 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Wed Apr 11 06:06:37 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Wed Apr 11 06:06:37 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.64"
[Wed Apr 11 06:06:37 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4.ximg exists
[Wed Apr 11 06:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4.csv
[Wed Apr 11 06:06:37 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed Apr 11 06:06:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4.csv
[Wed Apr 11 06:06:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Apr 11 06:06:38 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed Apr 11 06:06:38 2012] fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed Apr 11 06:06:38 2012] Fit fullrun_mos1_xmm0026340101_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Wed Apr 11 06:06:48 2012] Spatial fit model total counts = 171.982000, observed total counts = 167.000000
[Wed Apr 11 06:06:48 2012] Offset between fit and detection position for source 10 = 0.016673 pixels
[Wed Apr 11 06:06:48 2012] 173.312100 total counts/ 81.578700 bgd. counts: snr = 10.156384
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.016673 pixels
  Position = (384.5, 286.9) = 9 39 3.96 71 8 49.4
  Extent = 5.6 (4.7-6.7)", rotation angle = 0
  Source counts = 91.7 +/- 13.2
  Background counts = 81.6
  Rate = 0.004 +/- 0.0005
[Wed Apr 11 06:06:48 2012] Vigneting correction estimate = 1.000000
[Wed Apr 11 06:06:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Apr 11 06:06:48 2012] Assessing source extent using major axis lower bound
[Wed Apr 11 06:06:48 2012] Source does appear to be extended
[Wed Apr 11 06:06:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Apr 11 06:07:04 2012] XMMSAS src. selection expression = ellipse(33405.469600, 24914.205600, 335.599810, 335.599810, 0.000000, X, Y)
[Wed Apr 11 06:07:04 2012] Not overwriting source region fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src.reg
[Wed Apr 11 06:07:04 2012] Extracting stamp from image fullrun_mos1_xmm0026340101_pi300-10000_cl_sm2.00.img.gz, (365, 268) - (404, 306)
[Wed Apr 11 06:07:04 2012] XMMSAS bgd. selection expression = annulus(33405.469600, 24914.205600, 559.333016, 1118.666032, X, Y)
[Wed Apr 11 06:07:04 2012] Writing fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10.gif
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/events/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0026340101/products/events/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Wed Apr 11 06:07:05 2012] Mean detx,y = (-8062.95, 2211.50) 
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/images/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src.img and ../../xmm0026340101/products/images/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/spectra/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0026340101/products/spectra/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Wed Apr 11 06:07:05 2012] Setting source spectrum file to fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Apr 11 06:07:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Apr 11 06:07:05 2012] ../../xmm0026340101/products/lightcurves/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0026340101/products/lightcurves/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Wed Apr 11 06:07:06 2012] Not generating rmf since there are only 91 counts
[Wed Apr 11 06:07:06 2012] rmf not generated due to insufficient counts
[Wed Apr 11 06:07:06 2012] fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Wed Apr 11 06:07:31 2012] Updating aperture counts using extracted products
[Wed Apr 11 06:07:31 2012] Error reading totcts from fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Apr 11 06:07:31 2012] Calculating source flux in energy range 0.30-8.00
[Wed Apr 11 06:07:31 2012] Using photon index=1.80, rate=0.00353, arf fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10.arf
[Wed Apr 11 06:07:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Apr 11 06:07:31 2012] Updating source flux to 5.9e-14
[Wed Apr 11 06:07:34 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Wed Apr 11 06:07:35 2012] xmm0026340101/analysis//spectral/fullrun_mos1_xmm0026340101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete