[Wed May 30 07:14:43 2012] Detection parameters:
  Position = (220.1, 238.3) = 16 4 47.79 43 1 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.4
  Background counts = 7.4
  Rate = 0.003 +/- 0.0007

[Wed May 30 07:14:43 2012] Off-axis axis estimate = 7.16'
[Wed May 30 07:55:25 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Wed May 30 07:55:25 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Wed May 30 07:55:25 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.797
[Wed May 30 07:55:25 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.01"
[Wed May 30 08:15:32 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15.ximg exists
[Wed May 30 08:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15.csv
[Wed May 30 08:15:32 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed May 30 08:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15.csv
[Wed May 30 08:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 08:15:32 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed May 30 08:15:32 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed May 30 08:15:32 2012] Fit fullrun_mos2_xmm0025740401_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed May 30 08:15:44 2012] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.612022 pixels away
[Wed May 30 08:15:44 2012] Vigneting correction estimate = 1.000000
[Wed May 30 08:15:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 08:15:44 2012] Assessing source extent using major
[Wed May 30 08:15:44 2012] Source does appear to be extended
[Wed May 30 08:15:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 30 08:59:07 2012] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting
[Wed May 30 08:59:07 2012] Initial guess for spatial extent in simple fitting = 10.01"
[Wed May 30 08:59:07 2012] source mask rpix=2.3, npix_max = 31, mask sum = 25, frac = 0.797
[Wed May 30 08:59:07 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 10.01"
[Wed May 30 09:17:16 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15.ximg exists
[Wed May 30 09:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15.csv
[Wed May 30 09:17:16 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed May 30 09:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15.csv
[Wed May 30 09:17:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 09:17:16 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed May 30 09:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 30 09:17:16 2012] fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed May 30 09:17:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15.csv
[Wed May 30 09:17:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0025740401_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 30 09:17:24 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 48.781377 pixels away
[Wed May 30 09:17:24 2012] Spatial fit model total counts = 74.280300, observed total counts = 67.000000
[Wed May 30 09:17:24 2012] Offset between fit and detection position for source 16 = 0.500670 pixels
[Wed May 30 09:17:24 2012] 74.974300 total counts/ 54.324000 bgd. counts: snr = 2.801757
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.500670 pixels
  Position = (220.6, 238.2) = 16 4 47.60 43 1 47.7
  Extent = 6.3" x 4.1", rotation angle = 358
  Source counts = 20.7 +/- 8.7
  Background counts = 54.3
  Rate = 0.001 +/- 0.0005
[Wed May 30 09:17:24 2012] Vigneting correction estimate = 1.000000
[Wed May 30 09:17:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 30 09:17:24 2012] Assessing source extent using major
[Wed May 30 09:17:24 2012] Source does appear to be extended
[Wed May 30 09:17:24 2012] Computing asymmetry using major and minor axis, asym = 1.54
[Wed May 30 09:17:24 2012] Source is asymmetric
[Wed May 30 09:37:06 2012] XMMSAS src. selection expression = ellipse(19140.891215, 20675.411080, 377.003261, 244.197254, 358.467452, X, Y)
[Wed May 30 09:37:06 2012] Writing source region out to fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16_src.reg
[Wed May 30 09:37:06 2012] Extracting stamp from image fullrun_mos2_xmm0025740401_pi300-10000_cl_sm2.00.img.gz, (199, 217) - (242, 260)
[Wed May 30 09:37:06 2012] XMMSAS bgd. selection expression = annulus(19140.891215, 20675.411080, 628.338768, 1256.677536, X, Y)
[Wed May 30 09:37:06 2012] Writing fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16.gif
[Wed May 30 09:39:21 2012] Mean detx,y = (-6725.71, 1661.83) 
[Wed May 30 09:39:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed May 30 09:39:30 2012] Binned source spectrum to 10 counts/bin
[Wed May 30 09:39:30 2012] Setting source spectrum file to fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 30 09:39:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed May 30 09:41:09 2012] Not generating rmf since there are only 20 counts
[Wed May 30 09:41:09 2012] rmf not generated due to insufficient counts
[Wed May 30 09:42:10 2012] Updating aperture counts using extracted products
[Wed May 30 09:42:10 2012] Error reading totcts from fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed May 30 09:42:10 2012] Calculating source flux in energy range 0.30-8.00
[Wed May 30 09:42:10 2012] Using photon index=1.80, rate=0.0013, arf fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16.arf
[Wed May 30 09:42:10 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 30 09:42:10 2012] Updating source flux to 3.3e-14
[Wed May 30 09:42:12 2012] Source 16 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 30 09:42:13 2012] xmm0025740401/analysis//spectral/fullrun_mos2_xmm0025740401_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete