[Sat Aug 18 05:37:19 2012] Detection parameters:
  Position = (377.5, 332.6) = 13 24 24.41 30 15 34.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 65.7 +/- 12.0
  Background counts = 33.0
  Rate = 0.003 +/- 0.0006

[Sat Aug 18 05:37:20 2012] Off-axis axis estimate = 6.25'
[Sat Aug 18 05:40:14 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 05:40:14 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Sat Aug 18 05:40:14 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.860
[Sat Aug 18 05:40:14 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.55"
[Sat Aug 18 07:08:53 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_src26.ximg exists
[Sat Aug 18 07:08:53 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_src26_1.ximg exists
[Sat Aug 18 07:08:53 2012] Fit fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_src26 appears to have run properly
[Sat Aug 18 07:08:54 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sat Aug 18 07:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Aug 18 07:08:54 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sat Aug 18 07:08:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sat Aug 18 07:08:54 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 09:17:27 2012] Source 26 is offset by 6.923852 and -5.472126 pixels which is larger than
2 X fitted extent = 1.097858 x 1.097858, not incorporating fit results
[Sat Aug 18 09:17:27 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 09:17:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 09:17:27 2012] Assessing source extent using major
[Sat Aug 18 09:17:27 2012] Source does appear to be extended
[Sat Aug 18 09:17:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 09:18:00 2012] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 09:18:00 2012] Initial guess for spatial extent in simple fitting = 9.55"
[Sat Aug 18 09:18:00 2012] source mask rpix=2.2, npix_max = 29, mask sum = 25, frac = 0.860
[Sat Aug 18 09:18:00 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 9.55"
[Sat Aug 18 11:00:14 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24.ximg exists
[Sat Aug 18 11:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24.csv
[Sat Aug 18 11:00:14 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24_1.ximg exists
[Sat Aug 18 11:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24.csv
[Sat Aug 18 11:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 11:00:15 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Sat Aug 18 11:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Aug 18 11:00:15 2012] fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Sat Aug 18 11:00:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24.csv
[Sat Aug 18 11:00:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 13:26:06 2012] Spatial fit model total counts = 383.335000, observed total counts = 316.000000
[Sat Aug 18 13:26:06 2012] Poor agreement between spatial fit and data for source 26
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug 18 13:26:06 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 13:26:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 13:26:06 2012] Assessing source extent using major
[Sat Aug 18 13:26:06 2012] Source does appear to be extended
[Sat Aug 18 13:26:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 13:26:38 2012] XMMSAS src. selection expression = ellipse(32797.393127, 28883.779053, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 18 13:26:38 2012] Writing source region out to fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26_src.reg
[Sat Aug 18 13:26:38 2012] Extracting stamp from image fullrun_pn_xmm0025740201_pi300-10000_cl_sm2.00.img.gz, (340, 295) - (415, 370)
[Sat Aug 18 13:26:38 2012] XMMSAS bgd. selection expression = annulus(32797.393127, 28883.779053, 1087.500000, 2175.000000, X, Y) && !ellipse(33585.150940, 26353.822876, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 18 13:26:38 2012] Writing fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26.gif
[Sat Aug 18 13:42:03 2012] Mean detx,y = (-8292.52, -445.13) 
[Sat Aug 18 13:42:07 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 13:42:36 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 13:42:36 2012] Setting source spectrum file to fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Aug 18 13:42:36 2012] Setting bgd. spectrum file to fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Sat Aug 18 14:33:36 2012] Not generating rmf since there are only 65 counts
[Sat Aug 18 14:33:36 2012] rmf not generated due to insufficient counts
[Sat Aug 18 16:35:23 2012] Updating aperture counts using extracted products
[Sat Aug 18 16:35:23 2012] Error reading totcts from fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Sat Aug 18 16:35:24 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 16:35:24 2012] Using photon index=1.80, rate=0.00336, arf fullrun_pn_xmm0025740201_pi300-10000_pass1_cl_src26.arf
[Sat Aug 18 16:35:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 16:35:24 2012] Updating source flux to 1.4e-14
[Sat Aug 18 16:36:28 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting