[Sat Aug 18 05:37:50 2012] Detection parameters: Position = (254.0, 134.0) = 13 25 5.87 30 1 10.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 281.0 +/- 20.8 Background counts = 9.6 Rate = 0.01 +/- 0.001 [Sat Aug 18 05:37:50 2012] Off-axis axis estimate = 12.35' [Sat Aug 18 07:08:54 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting [Sat Aug 18 07:08:54 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 18 07:08:54 2012] Initial guess for spatial extent in simple fitting = 12.60" [Sat Aug 18 07:08:54 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.780 [Sat Aug 18 07:08:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.60" [Sat Aug 18 08:06:29 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1.ximg exists [Sat Aug 18 08:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1.csv [Sat Aug 18 08:06:29 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Aug 18 08:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1.csv [Sat Aug 18 08:06:29 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Aug 18 08:06:30 2012] Fit fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Aug 18 09:17:36 2012] Warning, spatial fit 1 centroid is now closest to src. 45 [Sat Aug 18 09:17:36 2012] Vigneting correction estimate = 1.000000 [Sat Aug 18 09:17:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 18 09:17:36 2012] Assessing source extent using major [Sat Aug 18 09:17:36 2012] Source does appear to be extended [Sat Aug 18 09:17:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 18 11:00:15 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting [Sat Aug 18 11:00:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Sat Aug 18 11:00:15 2012] Initial guess for spatial extent in simple fitting = 12.60" [Sat Aug 18 11:00:15 2012] source mask rpix=2.9, npix_max = 46, mask sum = 36, frac = 0.780 [Sat Aug 18 11:00:15 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.60" [Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src1.ximg exists [Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Aug 18 12:00:30 2012] Fit fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src1 appears to have run properly [Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Aug 18 12:00:30 2012] Fit fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Aug 18 13:26:14 2012] Spatial fit model total counts = 466.434000, observed total counts = 461.000000 [Sat Aug 18 13:26:14 2012] Offset between fit and detection position for source 3 = 0.036124 pixels [Sat Aug 18 13:26:14 2012] 464.980000 total counts/ 268.845000 bgd. counts: snr = 11.962009 Spatial fit parameters: Offset between fit and detection position for source 3 = 0.036124 pixels Position = (254.0, 134.1) = 13 25 5.87 30 1 10.9 Extent = 5.9 (5.2-6.6)", rotation angle = 0 Source counts = 196.1 +/- 21.6 Background counts = 268.8 Rate = 0.005 +/- 0.0006 [Sat Aug 18 13:26:14 2012] Vigneting correction estimate = 1.000000 [Sat Aug 18 13:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Aug 18 13:26:14 2012] Assessing source extent using major axis lower bound [Sat Aug 18 13:26:14 2012] Source does appear to be extended [Sat Aug 18 13:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Aug 18 15:25:22 2012] XMMSAS src. selection expression = ellipse(22045.743600, 11614.115600, 356.256610, 356.256610, 0.000000, X, Y) [Sat Aug 18 15:25:22 2012] Writing source region out to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_src.reg [Sat Aug 18 15:25:22 2012] Extracting stamp from image fullrun_mos1_xmm0025740201_pi300-10000_cl_sm2.00.img.gz, (233, 114) - (274, 155) [Sat Aug 18 15:25:22 2012] XMMSAS bgd. selection expression = annulus(22045.743600, 11614.115600, 593.761017, 1187.522034, X, Y) [Sat Aug 18 15:25:22 2012] Writing fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3.gif [Sat Aug 18 15:25:26 2012] Mean detx,y = (7431.55, 10522.78) [Sat Aug 18 15:25:27 2012] Setting backscal keywords in source and bgd. spectrum [Sat Aug 18 15:25:35 2012] Binned source spectrum to 10 counts/bin [Sat Aug 18 15:25:35 2012] Setting source spectrum file to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sat Aug 18 15:25:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_bgd.pi.gz [Sat Aug 18 16:35:24 2012] Updating aperture counts using extracted products [Sat Aug 18 16:35:24 2012] Error reading totcts from fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_src_b10.pi.gz [Sat Aug 18 16:35:25 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 18 16:35:25 2012] Using photon index=1.80, rate=0.00505, arf fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3.arf [Sat Aug 18 16:35:25 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 18 16:35:25 2012] Updating source flux to 1.1e-13 [Sat Aug 18 16:35:42 2012] Reading fit data from xmm0025740201/analysis//spectral/fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_pl.csv [Sat Aug 18 16:35:42 2012] Spectral fit parameter nH value = 8.75752e+20 [Sat Aug 18 16:35:42 2012] Spectral fit parameter PhoIndex value = 1.98795 [Sat Aug 18 16:35:42 2012] Failed to get F(0.3-8.0) from xmm0025740201/analysis//spectral/fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected [Sat Aug 18 16:35:42 2012] Calculating source flux in energy range 0.30-8.00 [Sat Aug 18 16:35:42 2012] Using Nh = 8.8e+20, photon index=1.99, rate=0.00505, arf fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src3.arf [Sat Aug 18 16:35:42 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Aug 18 16:35:42 2012] Updating source flux to 1.1e-13