[Sat Aug 18 05:37:50 2012] Detection parameters:
  Position = (254.9, 369.4) = 13 25 5.58 30 18 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.6 +/- 9.3
  Background counts = 10.1
  Rate = 0.002 +/- 0.0004

[Sat Aug 18 05:37:50 2012] Off-axis axis estimate = 6.04'
[Sat Aug 18 07:08:54 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 07:08:54 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Aug 18 07:08:54 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Sat Aug 18 07:08:54 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.45"
[Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31.ximg exists
[Sat Aug 18 08:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31.csv
[Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Aug 18 08:06:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31.csv
[Sat Aug 18 08:06:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Aug 18 08:06:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Aug 18 08:06:30 2012] Fit fullrun_mos1_xmm0025740201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Aug 18 09:17:36 2012] Warning, spatial fit 31 centroid is now closest to src. 10
[Sat Aug 18 09:17:36 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 09:17:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 09:17:36 2012] Assessing source extent using major
[Sat Aug 18 09:17:36 2012] Source does appear to be extended
[Sat Aug 18 09:17:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 11:00:15 2012] Using EEF radius (= 9.45 ")to estimate initial spatial extent for simple fitting
[Sat Aug 18 11:00:15 2012] Initial guess for spatial extent in simple fitting = 9.45"
[Sat Aug 18 11:00:15 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.051
[Sat Aug 18 11:00:15 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 9.45"
[Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31.ximg exists
[Sat Aug 18 12:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31.csv
[Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Aug 18 12:00:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31.csv
[Sat Aug 18 12:00:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 18 12:00:30 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Aug 18 12:00:31 2012] fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Aug 18 12:00:31 2012] Fit fullrun_mos1_xmm0025740201_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Aug 18 13:26:14 2012] Spatial fit model total counts = 194.285000, observed total counts = 203.000000
[Sat Aug 18 13:26:14 2012] Offset between fit and detection position for source 29 = 6.067793 pixels
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 6.067793 pixels
  Position = (259.8, 373.1) = 13 25 3.95 30 18 30.6
  Extent = 18.9 (18.8-37.8)", rotation angle = 0
  Source counts = 155.0 +/- 12.4
  Background counts = 0.0
  Rate = 0.004 +/- 0.0003
[Sat Aug 18 13:26:14 2012] Vigneting correction estimate = 1.000000
[Sat Aug 18 13:26:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 18 13:26:14 2012] Assessing source extent using major axis lower bound
[Sat Aug 18 13:26:14 2012] Source does appear to be extended
[Sat Aug 18 13:26:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 18 15:25:23 2012] XMMSAS src. selection expression = ellipse(22554.706000, 32407.414000, 1133.574033, 1133.574033, 0.000000, X, Y)
[Sat Aug 18 15:25:23 2012] Writing source region out to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29_src.reg
[Sat Aug 18 15:25:23 2012] Extracting stamp from image fullrun_mos1_xmm0025740201_pi300-10000_cl_sm2.00.img.gz, (195, 308) - (325, 438)
[Sat Aug 18 15:25:23 2012] XMMSAS bgd. selection expression = annulus(22554.706000, 32407.414000, 1889.290054, 3778.580109, X, Y) && !ellipse(25478.873400, 31333.350600, 417.093612, 417.093612, 0.000000, X, Y) && !ellipse(21609.441300, 31535.296800, 288.477608, 288.477608, 0.000000, X, Y) && !ellipse(23450.646018, 29186.058133, 476.033447, 287.707679, 343.320968, X, Y) && !ellipse(23332.800800, 34135.479000, 274.500808, 274.500808, 0.000000, X, Y)
[Sat Aug 18 15:25:23 2012] Writing fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29.gif
[Sat Aug 18 15:33:26 2012] Mean detx,y = (-8570.16, -2586.55) 
[Sat Aug 18 15:33:27 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 18 15:34:00 2012] Binned source spectrum to 10 counts/bin
[Sat Aug 18 15:34:01 2012] Setting source spectrum file to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Aug 18 15:34:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Aug 18 16:35:25 2012] Updating aperture counts using extracted products
[Sat Aug 18 16:35:25 2012] Error reading totcts from fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Aug 18 16:35:25 2012] Calculating source flux in energy range 0.30-8.00
[Sat Aug 18 16:35:25 2012] Using photon index=1.80, rate=0.00399, arf fullrun_mos1_xmm0025740201_pi300-10000_pass1_cl_src29.arf
[Sat Aug 18 16:35:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Aug 18 16:35:25 2012] Updating source flux to 5.6e-14