[Fri Sep 30 18:33:50 2011] Detection parameters:
  Position = (279.3, 220.5) = 8 48 30.23 74 1 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.6 +/- 18.2
  Background counts = 13.2
  Rate = 0.02 +/- 0.001

[Fri Sep 30 18:33:50 2011] Off-axis axis estimate = 5.82'
[Fri Sep 30 18:34:34 2011] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:34:34 2011] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Sep 30 18:34:34 2011] source mask rpix=2.1, npix_max = 28, mask sum = 24, frac = 0.856
[Fri Sep 30 18:34:34 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 9.34"
[Fri Sep 30 18:45:10 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 30 18:45:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 18:45:10 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 30 18:45:10 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 18:45:10 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 18:45:10 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 18:45:10 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 18:45:10 2011] Fit fullrun_mos1_xmm0025540401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 18:52:09 2011] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.333971 pixels away
[Fri Sep 30 18:52:09 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 18:52:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 18:52:09 2011] Assessing source extent using major
[Fri Sep 30 18:52:09 2011] Source does appear to be extended
[Fri Sep 30 18:52:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 18:52:13 2011] Using EEF radius (= 9.34 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 18:52:13 2011] Initial guess for spatial extent in simple fitting = 9.34"
[Fri Sep 30 18:52:13 2011] source mask rpix=2.1, npix_max = 28, mask sum = 24, frac = 0.856
[Fri Sep 30 18:52:13 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.34"
[Fri Sep 30 19:00:57 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 19:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 19:00:57 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 19:00:57 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 19:00:57 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 19:00:57 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 19:00:57 2011] fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 19:00:57 2011] Fit fullrun_mos1_xmm0025540401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 19:09:47 2011] Spatial fit model total counts = 266.607000, observed total counts = 267.000000
[Fri Sep 30 19:09:47 2011] Offset between fit and detection position for source 1 = 0.016616 pixels
[Fri Sep 30 19:09:47 2011] 270.099000 total counts/ 130.770000 bgd. counts: snr = 12.183932
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.016616 pixels
  Position = (279.3, 220.5) = 8 48 30.23 74 1 54.1
  Extent = 5.6 (4.7-6.5)", rotation angle = 0
  Source counts = 139.3 +/- 16.4
  Background counts = 130.8
  Rate = 0.01 +/- 0.001
[Fri Sep 30 19:09:47 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 19:09:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 19:09:47 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 19:09:47 2011] Source does appear to be extended
[Fri Sep 30 19:09:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 19:09:52 2011] XMMSAS src. selection expression = ellipse(24249.282800, 19131.307600, 335.990410, 335.990410, 0.000000, X, Y)
[Fri Sep 30 19:09:52 2011] Writing source region out to fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 19:09:52 2011] Extracting stamp from image fullrun_mos1_xmm0025540401_pi300-10000_cl_sm2.00.img.gz, (260, 201) - (299, 240)
[Fri Sep 30 19:09:52 2011] XMMSAS bgd. selection expression = annulus(24249.282800, 19131.307600, 559.984016, 1119.968032, X, Y)
[Fri Sep 30 19:09:52 2011] Writing fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 19:09:54 2011] Mean detx,y = (2188.41, 4624.77) 
[Fri Sep 30 19:09:55 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 19:10:02 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 19:10:02 2011] Setting source spectrum file to fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 19:10:02 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 19:27:39 2011] Updating aperture counts using extracted products
[Fri Sep 30 19:27:39 2011] Error reading totcts from fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 19:27:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 19:27:39 2011] Using photon index=1.80, rate=0.0104, arf fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 19:27:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 19:27:39 2011] Updating source flux to 1.5e-13
[Fri Sep 30 19:27:56 2011] Reading fit data from xmm0025540401/analysis//spectral/fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 19:27:56 2011] Spectral fit parameter nH value = 1.67706e+14
[Fri Sep 30 19:27:56 2011] Spectral fit parameter PhoIndex value = 2.52187
[Fri Sep 30 19:27:56 2011] Failed to get F(0.3-8.0) from xmm0025540401/analysis//spectral/fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 19:27:56 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 19:27:56 2011] Using Nh = 1.7e+14, photon index=2.52, rate=0.0104, arf fullrun_mos1_xmm0025540401_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 19:27:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 19:27:56 2011] Updating source flux to 1.2e-13