[Wed Aug  8 21:18:29 2012] Detection parameters:
  Position = (150.8, 173.2) = 1 8 25.24 -17 38 33.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42.6 +/- 8.7
  Background counts = 5.8
  Rate = 0.004 +/- 0.0008

[Wed Aug  8 21:18:30 2012] Off-axis axis estimate = 14.04'
[Wed Aug  8 21:38:23 2012] Using EEF radius (= 13.45 ")to estimate initial spatial extent for simple fitting
[Wed Aug  8 21:38:23 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  8 21:38:23 2012] Initial guess for spatial extent in simple fitting = 13.45"
[Wed Aug  8 21:38:23 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.950
[Wed Aug  8 21:38:23 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.45"
[Wed Aug  8 21:52:37 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Aug  8 21:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6.csv
[Wed Aug  8 21:52:37 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Aug  8 21:52:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6.csv
[Wed Aug  8 21:52:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 21:52:37 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Aug  8 21:52:37 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Aug  8 21:52:37 2012] Fit fullrun_mos2_xmm0025540101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Aug  8 21:52:43 2012] Spatial fit model total counts = 45.199500, observed total counts = 45.000000
[Wed Aug  8 21:52:43 2012] Offset between fit and detection position for source 3 = 0.738958 pixels
[Wed Aug  8 21:52:43 2012] 45.897400 total counts/ 23.409900 bgd. counts: snr = 4.647735
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.738958 pixels
  Position = (151.5, 173.2) = 1 8 25.01 -17 38 34.5
  Extent = 7.3 (4.9-10.5)", rotation angle = 0
  Source counts = 22.5 +/- 6.8
  Background counts = 23.4
  Rate = 0.003 +/- 0.0009
[Wed Aug  8 21:52:43 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 21:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 21:52:43 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 21:52:43 2012] Source does appear to be extended
[Wed Aug  8 21:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:07:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  8 22:07:11 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Aug  8 22:07:11 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.059
[Wed Aug  8 22:07:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.28"
[Wed Aug  8 22:19:45 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Aug  8 22:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6.csv
[Wed Aug  8 22:19:45 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Aug  8 22:19:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6.csv
[Wed Aug  8 22:19:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  8 22:19:45 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Aug  8 22:19:45 2012] fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Aug  8 22:19:45 2012] Fit fullrun_mos2_xmm0025540101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Wed Aug  8 22:19:50 2012] Spatial fit model total counts = 39.454100, observed total counts = 40.000000
[Wed Aug  8 22:19:50 2012] Offset between fit and detection position for source 3 = 0.141981 pixels
[Wed Aug  8 22:19:50 2012] 41.233100 total counts/ 19.673500 bgd. counts: snr = 4.860712
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.141981 pixels
  Position = (151.6, 173.1) = 1 8 24.99 -17 38 35.1
  Extent = 7.0 (4.7-10.9)", rotation angle = 0
  Source counts = 21.6 +/- 6.4
  Background counts = 19.7
  Rate = 0.003 +/- 0.0008
[Wed Aug  8 22:19:50 2012] Vigneting correction estimate = 1.000000
[Wed Aug  8 22:19:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  8 22:19:50 2012] Assessing source extent using major axis lower bound
[Wed Aug  8 22:19:50 2012] Source does appear to be extended
[Wed Aug  8 22:19:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  8 22:31:08 2012] XMMSAS src. selection expression = ellipse(13137.740600, 15007.373800, 419.824695, 419.824695, 0.000000, X, Y)
[Wed Aug  8 22:31:08 2012] Writing source region out to fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3_src.reg
[Wed Aug  8 22:31:08 2012] Extracting stamp from image fullrun_mos2_xmm0025540101_pi300-10000_cl_sm2.00.img.gz, (127, 149) - (176, 197)
[Wed Aug  8 22:31:08 2012] XMMSAS bgd. selection expression = annulus(13137.740600, 15007.373800, 699.707825, 1399.415650, X, Y)
[Wed Aug  8 22:31:08 2012] Writing fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3.gif
[Wed Aug  8 22:32:15 2012] Mean detx,y = (-5748.74, 13657.00) 
[Wed Aug  8 22:32:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  8 22:32:24 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  8 22:32:24 2012] Setting source spectrum file to fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 22:32:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Aug  8 22:38:27 2012] Not generating rmf since there are only 21 counts
[Wed Aug  8 22:38:27 2012] rmf not generated due to insufficient counts
[Wed Aug  8 22:39:09 2012] Updating aperture counts using extracted products
[Wed Aug  8 22:39:09 2012] Error reading totcts from fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Aug  8 22:39:09 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  8 22:39:09 2012] Using photon index=1.80, rate=0.00272, arf fullrun_mos2_xmm0025540101_pi300-10000_pass1_cl_src3.arf
[Wed Aug  8 22:39:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  8 22:39:09 2012] Updating source flux to 8.8e-14
[Wed Aug  8 22:39:23 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting