[Tue May 28 20:07:06 2013] Detection parameters:
  Position = (250.8, 216.7) = 4 20 6.78 15 30 32.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.9 +/- 17.8
  Background counts = 65.4
  Rate = 0.005 +/- 0.0006

[Tue May 28 20:07:07 2013] Off-axis axis estimate = 6.86'
[Tue May 28 20:10:37 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Tue May 28 20:10:37 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Tue May 28 20:10:37 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.980
[Tue May 28 20:10:37 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 9.86"
[Tue May 28 21:16:18 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41.ximg exists
[Tue May 28 21:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41.csv
[Tue May 28 21:16:18 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue May 28 21:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41.csv
[Tue May 28 21:16:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 21:16:18 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue May 28 21:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Tue May 28 21:16:18 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue May 28 21:16:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41.csv
[Tue May 28 21:16:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 22:31:54 2013] Source 41 is offset by -7.899420 and 0.113260 pixels which is larger than
2 X fitted extent = 1.436244 x 1.133007, not incorporating fit results
[Tue May 28 22:31:54 2013] Vigneting correction estimate = 1.000000
[Tue May 28 22:31:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 28 22:31:54 2013] Assessing source extent using major
[Tue May 28 22:31:54 2013] Source does appear to be extended
[Tue May 28 22:31:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 28 22:32:14 2013] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Tue May 28 22:32:14 2013] Initial guess for spatial extent in simple fitting = 9.86"
[Tue May 28 22:32:14 2013] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.980
[Tue May 28 22:32:14 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 9.86"
[Tue May 28 23:44:17 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41.ximg exists
[Tue May 28 23:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41.csv
[Tue May 28 23:44:17 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41_1.ximg exists
[Tue May 28 23:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41.csv
[Tue May 28 23:44:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 28 23:44:17 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Tue May 28 23:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Tue May 28 23:44:17 2013] fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Tue May 28 23:44:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41.csv
[Tue May 28 23:44:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 00:40:51 2013] Source 41 is offset by -7.235880 and 0.108571 pixels which is larger than
2 X fitted extent = 1.134124 x 1.134124, not incorporating fit results
[Wed May 29 00:40:51 2013] Vigneting correction estimate = 1.000000
[Wed May 29 00:40:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 00:40:51 2013] Assessing source extent using major
[Wed May 29 00:40:51 2013] Source does appear to be extended
[Wed May 29 00:40:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 00:41:20 2013] XMMSAS src. selection expression = ellipse(21773.334473, 18805.485641, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 00:41:20 2013] Writing source region out to fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_src.reg
[Wed May 29 00:41:20 2013] Extracting stamp from image fullrun_pn_xmm0024140101_pi300-10000_cl_sm2.00.img.gz, (213, 179) - (288, 254)
[Wed May 29 00:41:21 2013] XMMSAS bgd. selection expression = annulus(21773.334473, 18805.485641, 1087.500000, 2175.000000, X, Y) && !ellipse(20598.316742, 19387.769409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24389.345459, 17232.967545, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 00:41:21 2013] Writing fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41.gif
[Wed May 29 01:30:40 2013] Mean detx,y = (-4435.09, 9010.23) 
[Wed May 29 01:30:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 01:31:11 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 01:31:12 2013] Setting source spectrum file to fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Wed May 29 01:31:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Wed May 29 02:33:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 02:33:36 2013] rmf not generated due to insufficient counts
[Wed May 29 03:17:56 2013] Updating aperture counts using extracted products
[Wed May 29 03:17:56 2013] Total counts from fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_src_b10.pi.gz = 388.00
[Wed May 29 03:17:56 2013] Total counts from fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_bgd.pi.gz = 2154.00
[Wed May 29 03:17:56 2013] Got source and background scale factors 1226928.000000, 8332861.000000
[Wed May 29 03:17:56 2013] User source parameters:
  Position = (250.8, 216.7) = 4 20 6.78 15 30 32.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 70.8 +/- 20.7
  Background aperture counts = 317.2
  Rate = 0.001 +/- 0.0004

[Wed May 29 03:17:56 2013] Updating counts from extracted products
[Wed May 29 03:17:56 2013] Set source signif. to 70.85/17.81 = 3.98
[Wed May 29 03:17:59 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 03:17:59 2013] Using photon index=1.80, rate=0.0013, arf fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41.arf
[Wed May 29 03:17:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 03:17:59 2013] Updating source flux to 9.6e-15
[Wed May 29 03:18:19 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 03:18:32 2013] xmm0024140101/analysis//spectral/fullrun_pn_xmm0024140101_pi300-10000_pass1_cl_src41_pl.csv not found, spectral fit skipped or did not complete