[Tue May 28 20:07:54 2013] Detection parameters: Position = (309.9, 233.7) = 4 19 48.98 15 31 55.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 105.3 +/- 12.9 Background counts = 19.9 Rate = 0.003 +/- 0.0004 [Tue May 28 20:07:55 2013] Off-axis axis estimate = 4.77' [Tue May 28 21:50:55 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting [Tue May 28 21:50:55 2013] Initial guess for spatial extent in simple fitting = 8.81" [Tue May 28 21:50:55 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.979 [Tue May 28 21:50:55 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 8.81" [Tue May 28 22:31:44 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5.ximg exists [Tue May 28 22:31:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5.csv [Tue May 28 22:31:44 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5_1.ximg exists [Tue May 28 22:31:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5.csv [Tue May 28 22:31:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 28 22:31:44 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists [Tue May 28 22:31:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5.csv [Tue May 28 22:31:44 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists [Tue May 28 22:31:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5.csv [Tue May 28 22:31:44 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0024140101_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 28 22:32:04 2013] Source 13 is offset by 1.549676 and -2.047190 pixels which is larger than 2 X fitted extent = 8.104138 x 1.268069, not incorporating fit results [Tue May 28 22:32:04 2013] Vigneting correction estimate = 1.000000 [Tue May 28 22:32:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 28 22:32:04 2013] Assessing source extent using major [Tue May 28 22:32:04 2013] Source does appear to be extended [Tue May 28 22:32:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 00:11:01 2013] Using EEF radius (= 8.81 ")to estimate initial spatial extent for simple fitting [Wed May 29 00:11:01 2013] Initial guess for spatial extent in simple fitting = 8.81" [Wed May 29 00:11:01 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.979 [Wed May 29 00:11:01 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 8.81" [Wed May 29 00:40:36 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5.ximg exists [Wed May 29 00:40:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5.csv [Wed May 29 00:40:36 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5_1.ximg exists [Wed May 29 00:40:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5.csv [Wed May 29 00:40:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 00:40:36 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists [Wed May 29 00:40:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 29 00:40:36 2013] fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists [Wed May 29 00:40:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5.csv [Wed May 29 00:40:36 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0024140101_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 00:41:03 2013] Source 13 is offset by 1.333910 and -1.941613 pixels which is larger than 2 X fitted extent = 8.104138 x 1.258855, not incorporating fit results [Wed May 29 00:41:03 2013] Vigneting correction estimate = 1.000000 [Wed May 29 00:41:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 00:41:03 2013] Assessing source extent using major [Wed May 29 00:41:03 2013] Source does appear to be extended [Wed May 29 00:41:03 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 02:54:25 2013] XMMSAS src. selection expression = ellipse(26916.800598, 20280.584076, 652.500000, 652.500000, 0.000000, X, Y) [Wed May 29 02:54:25 2013] Writing source region out to fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_src.reg [Wed May 29 02:54:25 2013] Extracting stamp from image fullrun_mos2_xmm0024140101_pi300-10000_cl_sm2.00.img.gz, (272, 196) - (347, 271) [Wed May 29 02:54:25 2013] XMMSAS bgd. selection expression = annulus(26916.800598, 20280.584076, 1087.500000, 2175.000000, X, Y) && !ellipse(29219.159698, 17351.847809, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 02:54:25 2013] Writing fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13.gif [Wed May 29 02:56:18 2013] Mean detx,y = (-488.59, -7082.43) [Wed May 29 02:56:21 2013] Setting backscal keywords in source and bgd. spectrum [Wed May 29 02:57:03 2013] Binned source spectrum to 10 counts/bin [Wed May 29 02:57:04 2013] Setting source spectrum file to fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_src_b10.pi.gz [Wed May 29 02:57:04 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_bgd.pi.gz [Wed May 29 03:09:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed May 29 03:09:38 2013] rmf not generated due to insufficient counts [Wed May 29 03:18:05 2013] Updating aperture counts using extracted products [Wed May 29 03:18:05 2013] Total counts from fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 189.00 [Wed May 29 03:18:06 2013] Total counts from fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1029.00 [Wed May 29 03:18:06 2013] Got source and background scale factors 912970.000000, 9823408.000000 [Wed May 29 03:18:06 2013] User source parameters: Position = (309.9, 233.7) = 4 19 48.98 15 31 55.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 93.4 +/- 14.8 Background aperture counts = 95.6 Rate = 0.002 +/- 0.0002 [Wed May 29 03:18:06 2013] Updating counts from extracted products [Wed May 29 03:18:06 2013] Set source signif. to 93.37/9.78 = 9.55 [Wed May 29 03:18:09 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 03:18:09 2013] Using photon index=1.80, rate=0.00153, arf fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13.arf [Wed May 29 03:18:09 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 03:18:09 2013] Updating source flux to 3.1e-14 [Wed May 29 03:18:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed May 29 03:18:19 2013] xmm0024140101/analysis//spectral/fullrun_mos2_xmm0024140101_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete