[Fri Jan 6 10:47:47 2012] Detection parameters: Position = (264.2, 290.5) = 5 39 57.81 -69 43 42.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1764.4 +/- 59.3 Background counts = 175.7 Rate = 0.06 +/- 0.002 [Fri Jan 6 10:47:49 2012] Off-axis axis estimate = 2.55' [Fri Jan 6 13:24:09 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Fri Jan 6 13:24:09 2012] Initial guess for spatial extent in simple fitting = 7.70" [Fri Jan 6 13:24:09 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970 [Fri Jan 6 13:24:09 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.70" [Fri Jan 6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6.ximg exists [Fri Jan 6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6.csv [Fri Jan 6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6_1.ximg exists [Fri Jan 6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6.csv [Fri Jan 6 22:02:07 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Jan 6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Fri Jan 6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Fri Jan 6 22:02:08 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly [Fri Jan 6 22:02:29 2012] Source 4 is offset by -5.878758 and 3.769707 pixels which is larger than 2 X fitted extent = 2.219255 x 2.219255, not incorporating fit results [Fri Jan 6 22:02:29 2012] Vigneting correction estimate = 1.000000 [Fri Jan 6 22:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Jan 6 22:02:29 2012] Assessing source extent using major [Fri Jan 6 22:02:29 2012] Source does appear to be extended [Fri Jan 6 22:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jan 7 02:28:56 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting [Sat Jan 7 02:28:56 2012] Initial guess for spatial extent in simple fitting = 7.70" [Sat Jan 7 02:28:56 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.970 [Sat Jan 7 02:28:56 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.70" [Sat Jan 7 09:46:16 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6.ximg exists [Sat Jan 7 09:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6.csv [Sat Jan 7 09:46:16 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6_1.ximg exists [Sat Jan 7 09:46:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6.csv [Sat Jan 7 09:46:16 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Sat Jan 7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Sat Jan 7 09:46:17 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Sat Jan 7 09:46:30 2012] Source 4 is offset by 7.316093 and -1.663102 pixels which is larger than 2 X fitted extent = 7.049609 x 7.049609, not incorporating fit results [Sat Jan 7 09:46:30 2012] Spatial fit model total counts = 7444.940000, observed total counts = 7446.000000 [Sat Jan 7 09:46:30 2012] Offset between fit and detection position for source 4 = 8.536161 pixels [Sat Jan 7 09:46:30 2012] Warning, changing simple spatial fit ID from 6 to 10 [Sat Jan 7 09:46:30 2012] 7452.770000 total counts/ 4125.840000 bgd. counts: snr = 51.794956 Spatial fit parameters: Offset between fit and detection position for source 4 = 8.536161 pixels Position = (268.3, 283.0) = 5 39 54.39 -69 44 13.3 Extent = 32.6 (32.6-65.2)", rotation angle = 0 Source counts = 3326.9 +/- 86.3 Background counts = 4125.8 Rate = 0.1 +/- 0.003 [Sat Jan 7 09:46:30 2012] Vigneting correction estimate = 1.000000 [Sat Jan 7 09:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Jan 7 09:46:30 2012] Assessing source extent using major axis lower bound [Sat Jan 7 09:46:30 2012] Source does appear to be extended [Sat Jan 7 09:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Jan 7 09:46:30 2012] Source is confused with source 6 [Sat Jan 7 12:17:20 2012] Counts = 3326.930000, rescaling region sizes by 2.000000 [Sat Jan 7 12:17:20 2012] XMMSAS src. selection expression = ellipse(23297.724000, 24570.641000, 3911.208113, 3911.208113, 0.000000, X, Y) [Sat Jan 7 12:17:20 2012] Writing source region out to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4_src.reg [Sat Jan 7 12:17:20 2012] Extracting stamp from image fullrun_mos2_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (44, 58) - (493, 508) [Sat Jan 7 12:17:20 2012] XMMSAS bgd. selection expression = annulus(23297.724000, 24570.641000, 13037.360375, 26074.720750, X, Y) && !ellipse(24926.373600, 24138.928744, 3385.344097, 3385.344097, 0.000000, X, Y) && !ellipse(24074.660767, 24211.641693, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24180.142426, 23798.614716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.410645, 25454.524628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.112518, 22723.402191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26653.955353, 25582.048340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.005035, 24030.199646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.777283, 21517.550278, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22253.168000, 24355.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(27214.795776, 23006.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.958557, 26660.022095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.882400, 19163.632400, 1172.624034, 514.466415, 90.000000, X, Y) && !ellipse(25597.886340, 18139.124400, 706.152020, 706.152020, 0.000000, X, Y) && !ellipse(25460.585380, 19388.372000, 1449.872042, 561.472016, 90.000000, X, Y) && !ellipse(10767.008394, 27174.816641, 489.259752, 363.899205, 89.582552, X, Y) && !ellipse(24337.587800, 28467.007200, 2400.656069, 647.454419, 75.471000, X, Y) && !ellipse(25475.992400, 19648.414000, 837.408024, 837.408024, 0.000000, X, Y) && !ellipse(24198.776600, 29748.260400, 1300.208037, 412.852812, 263.821000, X, Y) && !ellipse(24262.204000, 28639.942000, 1060.008031, 1060.008031, 0.000000, X, Y) && !ellipse(25282.202606, 20916.395889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.785370, 21363.413879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13479.782288, 21806.908646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.431122, 23015.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24161.208400, 30163.449200, 1046.912030, 1046.912030, 0.000000, X, Y) && !ellipse(21243.834015, 25085.772919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.285675, 25862.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21271.121078, 26470.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.818000, 27456.550000, 2410.496069, 927.176027, 66.069000, X, Y) && !ellipse(25052.062012, 27857.265076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22256.756897, 29877.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.620000, 27093.820000, 2236.288064, 2236.288064, 0.000000, X, Y) && !ellipse(27904.048000, 25066.675200, 1205.600035, 1205.600035, 0.000000, X, Y) && !ellipse(23099.876000, 27954.920000, 1205.248035, 1205.248035, 0.000000, X, Y) && !ellipse(26953.640000, 27625.499800, 1138.072033, 1138.072033, 0.000000, X, Y) [Sat Jan 7 12:17:20 2012] Writing fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4.gif [Sat Jan 7 12:49:34 2012] Mean detx,y = (-137.98, -109.89) [Sat Jan 7 12:49:38 2012] Setting backscal keywords in source and bgd. spectrum [Sat Jan 7 12:58:14 2012] Binned source spectrum to 10 counts/bin [Sat Jan 7 12:58:14 2012] Setting source spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sat Jan 7 12:58:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4_bgd.pi.gz [Sat Jan 7 16:07:02 2012] Updating aperture counts using extracted products [Sat Jan 7 16:07:02 2012] Error reading totcts from fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sat Jan 7 16:07:02 2012] Calculating source flux in energy range 0.30-8.00 [Sat Jan 7 16:07:02 2012] Using photon index=1.80, rate=0.129, arf fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src4.arf [Sat Jan 7 16:07:02 2012] Assuming count rate is from the 0.30-10.00 bandpass [Sat Jan 7 16:07:02 2012] Updating source flux to 1.1e-12 [Sat Jan 7 16:10:32 2012] Flag b found in src. 4 procflags, skipping spectral fitting [Sat Jan 7 16:10:32 2012] Flag c found in src. 4 procflags, skipping spectral fitting