[Fri Jan  6 10:47:47 2012] Detection parameters:
  Position = (288.8, 278.1) = 5 39 37.28 -69 44 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 223969.0 +/- 533.5
  Background counts = 211.1
  Rate = 6 +/- 0.01

[Fri Jan  6 10:47:49 2012] Off-axis axis estimate = 1.63'
[Fri Jan  6 13:24:09 2012] Using EEF radius (= 7.25 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 13:24:09 2012] Initial guess for spatial extent in simple fitting = 7.25"
[Fri Jan  6 13:24:09 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.853
[Fri Jan  6 13:24:09 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.25"
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jan  6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jan  6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1.csv
[Fri Jan  6 22:02:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jan  6 22:02:07 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jan  6 22:02:29 2012] Spatial fit model total counts = 312501.000000, observed total counts = 310747.000000
[Fri Jan  6 22:02:29 2012] Offset between fit and detection position for source 3 = 2.016757 pixels
[Fri Jan  6 22:02:29 2012] 315857.300000 total counts/ 10425.300000 bgd. counts: snr = 2991.370837
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.016757 pixels
  Position = (286.8, 277.8) = 5 39 38.96 -69 44 35.8
  Extent = 14.1 (14.1-14.1)", rotation angle = 0
  Source counts = 305432.0 +/- 562.0
  Background counts = 10425.3
  Rate = 1e+01 +/- 0.02
[Fri Jan  6 22:02:29 2012] Spatial fit model total counts = 104139.000000, observed total counts = 122352.000000
[Fri Jan  6 22:02:29 2012] Poor agreement between spatial fit and data for source 3
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jan  6 22:02:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 22:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 22:02:29 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 22:02:29 2012] Source does appear to be extended
[Fri Jan  6 22:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 22:02:29 2012] Source is confused with source 1
[Fri Jan  6 22:02:29 2012] Source is confused with source 2
[Sat Jan  7 02:28:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jan  7 02:28:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jan  7 02:28:56 2012] Initial guess for spatial extent in simple fitting = 14.05"
[Sat Jan  7 02:28:56 2012] source mask rpix=3.2, npix_max = 55, mask sum = 63, frac = 1.132
[Sat Jan  7 02:28:56 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.05"
[Sat Jan  7 09:46:16 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jan  7 09:46:16 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jan  7 09:46:16 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Jan  7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jan  7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jan  7 09:46:17 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jan  7 09:46:30 2012] Spatial fit model total counts = 364155.000000, observed total counts = 371008.000000
[Sat Jan  7 09:46:30 2012] Offset between fit and detection position for source 3 = 0.351468 pixels
[Sat Jan  7 09:46:30 2012] 361124.000000 total counts/ 67600.000000 bgd. counts: snr = 1128.938462
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.351468 pixels
  Position = (287.1, 278.0) = 5 39 38.71 -69 44 35.0
  Extent = 14.1 (14.1-14.1)", rotation angle = 0
  Source counts = 293524.0 +/- 600.9
  Background counts = 67600.0
  Rate = 1e+01 +/- 0.02
[Sat Jan  7 09:46:30 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 09:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 09:46:30 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 09:46:30 2012] Source does appear to be extended
[Sat Jan  7 09:46:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jan  7 12:17:19 2012] Counts = 293524.000000, rescaling region sizes by 3.000000
[Sat Jan  7 12:17:19 2012] XMMSAS src. selection expression = ellipse(24926.373600, 24138.928744, 2539.008073, 2539.008073, 0.000000, X, Y)
[Sat Jan  7 12:17:19 2012] Writing source region out to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_src.reg
[Sat Jan  7 12:17:19 2012] Extracting stamp from image fullrun_mos2_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (141, 132) - (433, 424)
[Sat Jan  7 12:17:20 2012] XMMSAS bgd. selection expression = annulus(24926.373600, 24138.928744, 12695.040365, 25390.080731, X, Y) && !ellipse(24074.660767, 24211.641693, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24180.142426, 23798.614716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.410645, 25454.524628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.112518, 22723.402191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.724000, 24570.641000, 2607.472075, 2607.472075, 0.000000, X, Y) && !ellipse(26653.955353, 25582.048340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.005035, 24030.199646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.777283, 21517.550278, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22253.168000, 24355.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(27214.795776, 23006.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.958557, 26660.022095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25501.882400, 19163.632400, 1172.624034, 514.466415, 90.000000, X, Y) && !ellipse(25597.886340, 18139.124400, 706.152020, 706.152020, 0.000000, X, Y) && !ellipse(25460.585380, 19388.372000, 1449.872042, 561.472016, 90.000000, X, Y) && !ellipse(10767.008394, 27174.816641, 489.259752, 363.899205, 89.582552, X, Y) && !ellipse(24337.587800, 28467.007200, 2400.656069, 647.454419, 75.471000, X, Y) && !ellipse(25475.992400, 19648.414000, 837.408024, 837.408024, 0.000000, X, Y) && !ellipse(24198.776600, 29748.260400, 1300.208037, 412.852812, 263.821000, X, Y) && !ellipse(24262.204000, 28639.942000, 1060.008031, 1060.008031, 0.000000, X, Y) && !ellipse(25282.202606, 20916.395889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.785370, 21363.413879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13479.782288, 21806.908646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.431122, 23015.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24161.208400, 30163.449200, 1046.912030, 1046.912030, 0.000000, X, Y) && !ellipse(21243.834015, 25085.772919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.285675, 25862.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21271.121078, 26470.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.818000, 27456.550000, 2410.496069, 927.176027, 66.069000, X, Y) && !ellipse(25052.062012, 27857.265076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22256.756897, 29877.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.620000, 27093.820000, 2236.288064, 2236.288064, 0.000000, X, Y) && !ellipse(27904.048000, 25066.675200, 1205.600035, 1205.600035, 0.000000, X, Y) && !ellipse(23099.876000, 27954.920000, 1205.248035, 1205.248035, 0.000000, X, Y) && !ellipse(26953.640000, 27625.499800, 1138.072033, 1138.072033, 0.000000, X, Y)
[Sat Jan  7 12:17:20 2012] Writing fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3.gif
[Sat Jan  7 12:17:47 2012] Mean detx,y = (-24.44, -30.60) 
[Sat Jan  7 12:17:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 12:28:19 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 12:28:20 2012] Setting source spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jan  7 12:28:20 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Jan  7 16:07:02 2012] Updating aperture counts using extracted products
[Sat Jan  7 16:07:02 2012] Error reading totcts from fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sat Jan  7 16:07:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 16:07:02 2012] Using photon index=1.80, rate=11.4, arf fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3.arf
[Sat Jan  7 16:07:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 16:07:02 2012] Updating source flux to 9.7e-11
[Sat Jan  7 16:10:32 2012] Flag p found in src. 3 procflags, skipping spectral fitting
[Sat Jan  7 16:10:32 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sat Jan  7 16:13:48 2012] Reading fit data from xmm0023940401/analysis//spectral/fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_pl.csv
[Sat Jan  7 16:13:48 2012] Spectral fit parameter nH value = 9.80916e+21
[Sat Jan  7 16:13:48 2012] Spectral fit parameter PhoIndex value = 2.76044
[Sat Jan  7 16:13:48 2012] Failed to get F(0.3-8.0) from xmm0023940401/analysis//spectral/fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Sat Jan  7 16:13:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 16:13:48 2012] Using Nh = 9.8e+21, photon index=2.76, rate=11.4, arf fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src3.arf
[Sat Jan  7 16:13:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 16:13:48 2012] Updating source flux to 1.1e-10