[Fri Jan  6 10:47:49 2012] Detection parameters:
  Position = (273.5, 315.9) = 5 39 50.03 -69 41 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 157.5 +/- 24.6
  Background counts = 216.9
  Rate = 0.005 +/- 0.0008

[Fri Jan  6 10:47:49 2012] Off-axis axis estimate = 2.21'
[Fri Jan  6 13:24:09 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 13:24:09 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Fri Jan  6 13:24:09 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.753
[Fri Jan  6 13:24:09 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 7.53"
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31.ximg exists
[Fri Jan  6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31.csv
[Fri Jan  6 22:02:07 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Jan  6 22:02:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31.csv
[Fri Jan  6 22:02:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Jan  6 22:02:08 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Jan  6 22:02:08 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Fri Jan  6 22:02:29 2012] Warning, spatial fit 31 centroid is now closest to src. 25
[Fri Jan  6 22:02:29 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 22:02:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 22:02:29 2012] Assessing source extent using major
[Fri Jan  6 22:02:29 2012] Source does appear to be extended
[Fri Jan  6 22:02:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 22:02:29 2012] Source is confused with source 25
[Sat Jan  7 02:28:56 2012] Using EEF radius (= 7.53 ")to estimate initial spatial extent for simple fitting
[Sat Jan  7 02:28:56 2012] Initial guess for spatial extent in simple fitting = 7.53"
[Sat Jan  7 02:28:56 2012] source mask rpix=1.7, npix_max = 19, mask sum = 15, frac = 0.753
[Sat Jan  7 02:28:56 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 7.53"
[Sat Jan  7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30.ximg exists
[Sat Jan  7 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30.csv
[Sat Jan  7 09:46:17 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Jan  7 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30.csv
[Sat Jan  7 09:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jan  7 09:46:18 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Jan  7 09:46:18 2012] fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Jan  7 09:46:18 2012] Fit fullrun_mos2_xmm0023940401_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Sat Jan  7 09:46:30 2012] Warning, spatial fit 30 centroid is now closest to src. 25
[Sat Jan  7 09:46:30 2012] Spatial fit model total counts = 2543.880000, observed total counts = 2544.000000
[Sat Jan  7 09:46:30 2012] Offset between fit and detection position for source 29 = 1.714037 pixels
[Sat Jan  7 09:46:30 2012] Warning, changing simple spatial fit ID from 30 to 36
[Sat Jan  7 09:46:30 2012] 2496.931000 total counts/ 2096.260000 bgd. counts: snr = 8.751154
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.714037 pixels
  Position = (271.8, 316.1) = 5 39 51.45 -69 41 49.1
  Extent = 30.1 (27.9-60.3)" x 11.6 (8.6-14.2)", rotation angle = 66 (56-74) degrees
  Source counts = 400.7 +/- 50.0
  Background counts = 2096.3
  Rate = 0.02 +/- 0.002
[Sat Jan  7 09:46:30 2012] Vigneting correction estimate = 1.000000
[Sat Jan  7 09:46:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jan  7 09:46:30 2012] Assessing source extent using major axis lower bound
[Sat Jan  7 09:46:30 2012] Source does appear to be extended
[Sat Jan  7 09:46:30 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.96
[Sat Jan  7 09:46:30 2012] Source is asymmetric
[Sat Jan  7 12:17:21 2012] XMMSAS src. selection expression = ellipse(23597.818000, 27456.550000, 1807.872052, 695.382020, 66.069000, X, Y)
[Sat Jan  7 12:17:21 2012] Writing source region out to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29_src.reg
[Sat Jan  7 12:17:21 2012] Extracting stamp from image fullrun_mos2_xmm0023940401_pi300-10000_cl_sm2.00.img.gz, (168, 212) - (376, 420)
[Sat Jan  7 12:17:21 2012] XMMSAS bgd. selection expression = annulus(23597.818000, 27456.550000, 3013.120087, 6026.240173, X, Y) && !ellipse(24926.373600, 24138.928744, 3385.344097, 3385.344097, 0.000000, X, Y) && !ellipse(24074.660767, 24211.641693, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24180.142426, 23798.614716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23804.410645, 25454.524628, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24241.112518, 22723.402191, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23297.724000, 24570.641000, 2607.472075, 2607.472075, 0.000000, X, Y) && !ellipse(26653.955353, 25582.048340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.005035, 24030.199646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26911.777283, 21517.550278, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(22253.168000, 24355.632000, 1303.736038, 1303.736038, 0.000000, X, Y) && !ellipse(27214.795776, 23006.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23965.958557, 26660.022095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24337.587800, 28467.007200, 2400.656069, 647.454419, 75.471000, X, Y) && !ellipse(24198.776600, 29748.260400, 1300.208037, 412.852812, 263.821000, X, Y) && !ellipse(24262.204000, 28639.942000, 1060.008031, 1060.008031, 0.000000, X, Y) && !ellipse(25282.202606, 20916.395889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25202.785370, 21363.413879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22327.431122, 23015.096985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24161.208400, 30163.449200, 1046.912030, 1046.912030, 0.000000, X, Y) && !ellipse(21243.834015, 25085.772919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27455.285675, 25862.642456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21271.121078, 26470.957458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.062012, 27857.265076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22256.756897, 29877.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26428.620000, 27093.820000, 2236.288064, 2236.288064, 0.000000, X, Y) && !ellipse(27904.048000, 25066.675200, 1205.600035, 1205.600035, 0.000000, X, Y) && !ellipse(23099.876000, 27954.920000, 1205.248035, 1205.248035, 0.000000, X, Y) && !ellipse(26953.640000, 27625.499800, 1138.072033, 1138.072033, 0.000000, X, Y)
[Sat Jan  7 12:17:21 2012] Writing fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29.gif
[Sat Jan  7 13:20:03 2012] Mean detx,y = (-1048.77, -3145.50) 
[Sat Jan  7 13:20:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jan  7 13:21:10 2012] Binned source spectrum to 10 counts/bin
[Sat Jan  7 13:21:10 2012] Setting source spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jan  7 13:21:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jan  7 16:07:02 2012] Updating aperture counts using extracted products
[Sat Jan  7 16:07:02 2012] Error reading totcts from fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jan  7 16:07:03 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 16:07:03 2012] Using photon index=1.80, rate=0.0156, arf fullrun_mos2_xmm0023940401_pi300-10000_pass1_cl_src29.arf
[Sat Jan  7 16:07:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 16:07:03 2012] Updating source flux to 1.6e-13
[Sat Jan  7 16:10:32 2012] Flag c found in src. 29 procflags, skipping spectral fitting